Hikvision DS-MP5604 4ch Mobile TVI DVR, HD1080P, GPS, VGA/CVBS

Model: DS-MP5604 TVI

Who This Is For

For fleet operators, transport companies, and law enforcement agencies who need a hardened in-vehicle recording solution that keeps working across demanding mobile environments, the Hikvision DS-MP5604 is a purpose-built 4-channel mobile TVI DVR designed to go where fixed NVRs cannot. It accepts up to 4 analog cameras at 1080p, records H.265-compressed footage directly to dual HDD or SSD bays, and overlays real-time GPS and GLONASS positioning data into the video stream so every incident is time-stamped and location-tagged automatically. The wide-voltage DC input - 9 to 32 VDC - means it runs reliably off vehicle power across ignition cycles and voltage fluctuations without additional regulators. Whether the installation is a transit bus, a cash-in-transit vehicle, a council ranger fleet, or a highway patrol car, this unit handles the recording, positioning, and connectivity in a single compact aluminium chassis.

What This NVR Actually Does

Who Buys This Model

• Transit and Bus Operators: Installing driver-facing, passenger cabin, and exterior cameras across a fleet of buses where GPS-stamped footage is required for incident investigation and route compliance.
• Cash-in-Transit Companies: Specifying hardened in-vehicle recording on secure transport vehicles that run 12V or 24V systems and need continuous footage throughout shifts with minimal maintenance intervention.
• Council and Government Fleet Managers: Deploying across ranger, inspection, or enforcement vehicles where GPS overlay is needed to verify officer locations during reported incidents.
• Law Enforcement and Security Contractors: Fitting patrol vehicles with a compact recorder that handles multiple camera angles and transmits live footage back to a control room via 3G/4G without dedicated in-vehicle IT infrastructure.
• Transport and Logistics Operators: Running 24V truck fleets where the wide-voltage DC input removes the need for additional power conditioning hardware during installation.

Honest Assessment

The DS-MP5604 handles the core demands of mobile video recording well. The dual HDD/SSD bays with SD card backup provide genuine redundancy for footage retention, the GPS and GLONASS overlay removes any ambiguity around vehicle location during incident review, and the 9 to 32 VDC input range makes this compatible with 12V passenger vehicles through to 24V heavy trucks without additional components. H.265 compression keeps storage manageable across extended recording periods. What this unit will not replace is a fixed site NVR for multi-camera facility coverage - it is specifically engineered for in-vehicle use and its 4-channel analog TVI input limits camera count accordingly. For operators needing IP camera compatibility or higher channel counts from the outset, a different recorder type would be more appropriate. The DS-MP5604 is available through Security Australia for transport and fleet surveillance applications.

Before You Buy

Quick Fit Check

• Good match if: You are equipping a 12V or 24V vehicle fleet with TVI analog cameras and need GPS-stamped 1080p footage recorded locally with 3G/4G remote access capability.
• Good match if: Your installation requires storage redundancy in a mobile environment - the dual HDD/SSD bays plus SD card slot allow a primary and backup recording path within a single compact unit.
• You may need a different model if: Your camera network uses IP rather than analog TVI cameras, or you need more than 4 channels - a mobile NVR with higher channel capacity and IP camera support would be a better fit. Browse the mobile recording range at securityaustralia.com.au for alternatives.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need a self-contained mobile DVR that handles 4-channel TVI analog recording, built-in GPS/GLONASS positioning, and 3G/4G remote access in a single fanless unit compatible with both 12V and 24V vehicle systems.
• You may need a different model if: Your vehicle cameras are IP-based rather than TVI analog, or you need more than 4 recording channels - a mobile NVR supporting IP cameras and higher channel counts would suit that configuration better.
• Pairs well with: TVI analog vehicle cameras with wide dynamic range for challenging in-cabin and exterior lighting conditions, an SSD drive for the primary recording bay to manage vibration, and an ignition-triggered power management module to protect vehicle battery life.

Common Questions

1. Will this DVR work in a 24V truck or bus as well as a standard 12V vehicle?

   Yes. The DS-MP5604 accepts a DC input range of 9 to 32 volts, which covers both 12V passenger vehicle and 24V heavy vehicle electrical systems directly. No step-down voltage converter is required, which simplifies installation in trucks, buses, and larger commercial vehicles where 24V systems are standard.

2. Does the GPS data appear in the recorded footage, or is it stored separately?

   The GPS and GLONASS positioning data is embedded into the recorded video stream. This means location coordinates are tied directly to the footage timeline, so during playback or incident review you can see where the vehicle was at each moment without cross-referencing a separate tracking log or system.

3. Can I use IP cameras with the DS-MP5604?

   No. The DS-MP5604 is designed for TVI analog cameras and accepts up to 4 analog channels at 1080p. It does not natively support IP cameras on its analog inputs. If your installation specifies IP cameras, a mobile NVR designed for IP inputs would be the correct product type to specify instead.

4. How much recording time do I get from the dual HDD/SSD bays?

   Retention depends on camera resolution, frame rate, and the amount of motion activity being recorded. With H.265 compression and 2 drives at up to 2 TB each, the total raw storage of up to 4 TB provides considerably longer recording periods than a single-drive setup. For a precise calculation based on your specific channel configuration and frame rate, the technical team at Security Australia can assist with storage planning before you order.

5. Is the 3G/4G connectivity built in, or do I need a separate module?

   3G/4G mobile transmission is supported by the DS-MP5604, but a compatible SIM card and active mobile data plan are required and are not included in the unit. You will need to insert an appropriate SIM and configure the mobile network settings before remote access features are operational. Confirm your carrier's data coverage along the vehicle's regular routes before relying on live streaming in the field.

6. Should I use an SSD or a spinning hard drive in a vehicle installation?

   An SSD is strongly recommended for vehicle installations. Spinning hard drives are vulnerable to shock and continuous vibration from road use, which can cause read/write errors or premature drive failure. SSDs have no moving parts and are significantly more resilient in mobile environments. The DS-MP5604 supports SSDs in both bays up to 2 TB each, and using SSDs in both slots with the SD card as a tertiary backup provides the most reliable storage configuration for vehicle deployment.

7. Does the DS-MP5604 operate in high-temperature environments like vehicle cabins in summer?

   Yes. The operating temperature range is -10°C to 60°C, which covers the interior temperature conditions of most commercial vehicles in Australian summer conditions. The fanless aluminium die-cast chassis dissipates heat passively - there are no fan components to fail from dust or vibration, which contributes to long-term reliability in confined vehicle enclosures.

Downloads & Resources

No downloads available for this product.