HiLook Hikvision 6MP AcuSense CCTV Kit - 2x Colour Deterrence IPC-T269-MU/SL + 4x Turret IPC-T361H-MU + 8CH PoE NVR (NVR-108MH-C/8P)

Model: HiLook 8CH AcuSense Turret Kit - 2x IPC-T269H-MU/SL + 4x IPC-T361H-MU + NVR-108MH-C/8P

Who This Is For

For property owners and installers who need active deterrence at key entry points without running two separate camera systems. This HiLook 8-channel AcuSense kit combines 2 colour deterrence turrets - the IPC-T269H-MU/SL models with built-in strobe light and siren - with 4 standard 6MP AcuSense turrets for perimeter and internal coverage, all managed through the 8-channel PoE NVR. It suits residential properties with a large block, small commercial premises such as trade yards or warehouses, and rental properties where a landlord wants visible active response at gates or carparks alongside quieter coverage at doors and walkways. The single PoE NVR means one cable run per camera and no separate power supplies. All 6 cameras share the same AcuSense AI classification platform, so the NVR manages human and vehicle alerts consistently across the entire installation.

What This System Actually Does

Who Buys This Model

• Homeowners with a large residential block: Place both IPC-T269H-MU/SL deterrence cameras at the driveway entry and rear gate, then use the 4x IPC-T361H-MU turrets at side passages, the front door, backyard, and garage.
• Trade business operators: Install the strobe and siren cameras facing the yard gate and loading access after hours, with the standard turrets covering the workshop interior, vehicle storage, and side fencing.
• Small commercial tenants or shop owners: Use the active deterrence cameras at the carpark entrance and rear of premises, and position the remaining turrets at the entry, counter area, and storeroom door.
• Residential investors managing rental properties: A complete plug-and-record kit that can be installed cleanly by a single technician, with remote monitoring via the Hik-Connect app once commissioned.
• Security installers quoting mid-tier residential jobs: A matched kit where all cameras share the same AcuSense platform and the NVR is pre-configured for them, reducing setup time and ensuring consistent alert behaviour across the site.

Honest Assessment

This kit genuinely earns its place where you need active deterrence at specific points and consistent AI-filtered alerts across the whole system. The 2 colour deterrence cameras add a layer most comparable kits do not include at this price point - the strobe and siren respond at the camera without any delay from a cloud server or manual action. All 6 cameras at 6MP with AcuSense means the NVR is working with consistent data, and the 2 spare PoE channels give the installation practical headroom for expansion. H.265+ keeps storage requirements manageable at 6MP across 6 streams.

What this kit will not do: the standard 4x turrets use infrared night vision and record in black and white after dark, which is fine for identification but does not match the full-colour night footage from the deterrence cameras. If full-colour night vision across all positions is a requirement, a full TiOC or colour-always kit would be more appropriate. This kit also does not include a hard drive - storage needs to be purchased separately. Security Australia stocks compatible drives if you need guidance on capacity.

Complete Package Contents

• 2 x HiLook IPC-T269H-MU/SL - 6MP AcuSense colour deterrence turret with built-in strobe light and siren, full-colour night vision, PoE
• 4 x HiLook IPC-T361H-MU - 6MP AcuSense turret camera, IR night vision, PoE
• 1 x HiLook NVR-108MH-C/8P - 8-channel PoE NVR, H.265+, up to 8MP recording, no HDD included

Before You Buy

Quick Fit Check

• Good match if: You need active on-site deterrence at 1 or 2 key entry points combined with standard monitored coverage elsewhere - the mix of 2 deterrence and 4 standard AcuSense turrets covers this in a single kit.
• Good match if: You are installing at a site with 6 cameras now but want the option to add 2 more later - the 8-channel PoE NVR has 2 ports available from day one without any upgrade required.
• You may need a different model if: Full-colour night vision is required at all 6 camera positions, not just the 2 deterrence cameras - a full TiOC or colour-always kit available on securityaustralia.com.au would be more appropriate for that requirement.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You want a mixed deployment - active deterrence at entry points combined with standard AI monitoring elsewhere - in a single matched kit from one manufacturer.
• You may need a different model if: You need full-colour night vision across all camera positions, not just the 2 deterrence cameras - a full TiOC or colour-always kit available on securityaustralia.com.au covers that requirement across all channels.
• Pairs well with: A surveillance-grade hard drive (4TB or 6TB) for the NVR, and a UPS (uninterruptible power supply) to keep the NVR running during brief power outages.

Common Questions

1. Does the strobe and siren activate automatically or does someone have to trigger it?

   It activates automatically at the camera. The IPC-T269H-MU/SL uses AcuSense AI to classify a detected target as a human or vehicle, and when that classification is confirmed, the strobe and siren respond at the camera in real time. No manual action, no cloud round-trip, and no NVR rule needs to fire first. You configure the detection zone and sensitivity during setup, and the camera handles the rest.

2. Will this kit work if my dog or cat sets off the motion detection regularly?

   No - AcuSense is specifically designed to filter this out. All 6 cameras in this kit use AcuSense AI classification to distinguish humans and vehicles from animals, moving foliage, and shadows. Alerts are generated only when a human or vehicle is confirmed, which significantly reduces nuisance activations compared to standard pixel-change motion detection.

3. Does the NVR come with a hard drive?

   No. The NVR-108MH-C/8P ships without a hard drive. You will need to purchase a compatible surveillance-grade HDD separately. The NVR supports drives up to 8TB in its single bay. At 6MP across 6 cameras recording continuously with H.265+ compression, a 4TB drive typically provides 30 or more days of storage depending on scene complexity and recording schedule.

4. Do all 6 cameras record in colour at night?

   No - only the 2x IPC-T269H-MU/SL cameras record in full colour at night. These use a built-in white light illuminator to produce colour footage in low light. The 4x IPC-T361H-MU standard turrets use infrared illumination and record in black and white after dark. If full-colour night vision is a requirement across all positions, consider a full TiOC or colour-always kit available through Security Australia.

5. Can I add more cameras to this system later?

   Yes. The NVR-108MH-C/8P has 8 PoE channels, and this kit uses only 6. The remaining 2 ports can accept additional HiLook or Hikvision IP cameras without any hardware change to the NVR. The NVR supports cameras up to 8MP, so you are not limited to 6MP models if your requirements change.

6. What cable do I need to run to each camera?

   Cat5e or Cat6 Ethernet cable is required from the NVR to each camera position. The NVR's built-in PoE ports carry both data and power over the same cable, so there is no separate power cable needed at the camera end. Maximum recommended cable run is 100 metres per camera from the NVR.

7. Can I view all 6 cameras remotely on my phone?

   Yes. The NVR-108MH-C/8P supports remote viewing via the Hik-Connect app on iOS and Android. Once the NVR is connected to your network and registered in Hik-Connect, you can view live streams, review recorded footage, and receive push notifications for human or vehicle detection alerts from any of the 6 cameras.

8. Are the cameras in this kit suitable for outdoor installation?

   Yes. All 6 cameras carry an IP67 ingress protection rating, which means they are rated against dust ingress and sustained water jets from any direction. They are suitable for direct outdoor installation on eaves, soffits, and external walls in Australian conditions. The turret housing design also reduces IR reflection that can occur with dome cameras in wet conditions.

Cabling Considerations

• Cable Type: Cat5e or Cat6 Ethernet cable from the NVR to each camera position.
• Max Cable Run: 100 metres per camera from the NVR PoE port. Beyond this, a PoE extender or midspan switch would be required.
• PoE Notes: All 6 cameras are powered directly from the NVR-108MH-C/8P's built-in PoE ports - no external injectors or power adapters required at the camera end. The 2 spare NVR ports can power additional cameras in future.
• Wiring Tips: Run cables inside conduit when exposed outdoors to protect against UV degradation and rodent damage. Use outdoor-rated Cat6 with a UV-stabilised jacket for any external cable runs that cannot be concealed in the wall or soffit cavity.

Downloads & Resources

No downloads available for this product.