6MP Hikvision CCTV Kit: 8 x BLACK Outdoor Turret Cameras with Acusense & Mic + 8CH NVR

Model: DS-2CD2366GIU / DS-7608NI-I2-8P BLACK

Who This Is For

When covering an entire property with a single coordinated system is the priority, this 6MP Hikvision AcuSense kit with 8 black turret cameras and an 8-channel NVR delivers everything needed in one purchase. The DS-2CD2366G2-IU cameras ship in black housing, which suits properties where a discrete or colour-matched installation matters - rendered homes, dark-fascia commercial builds, and strata developments where aesthetics are part of the brief. Each camera pairs a 2.8mm wide-angle lens with AcuSense deep learning to separate human and vehicle movement from background noise like swaying trees or passing animals, keeping alert fatigue low. The built-in microphone adds an audio layer at every camera position without additional hardware. Installers commissioning multi-point residential or small commercial sites will appreciate the PoE NVR handling power and data over a single cable run to each camera head.

What This System Actually Does

Who Buys This Model

• Residential installers: Commissioning whole-of-property coverage on larger homes where 8 camera positions are needed to cover front, rear, sides, driveway, and garage - all run back to a single PoE NVR without a separate power injection point at each camera.
• Small commercial operators: Retail shops, cafes, and small warehouses that need human and vehicle detection across multiple external zones to reduce overnight false alarms without paying for a monitored alarm system.
• Strata and body corporate managers: Specifying black-housing cameras to match dark fascia or colour-scheme requirements on apartment blocks, townhouse complexes, or commercial premises where standard white cameras are aesthetically unsuitable.
• Property developers and builders: Completing handover packages that include a pre-wired, fully functional 8-camera IP system - the PoE architecture means the system is network-ready and accessible remotely from day one.
• IT-led facilities teams: Managing security infrastructure alongside existing network hardware who want an IP-based system with H.265+ compression to limit NVR storage consumption and network bandwidth across a multi-camera deployment.

Honest Assessment

This kit performs well where AcuSense false alarm reduction, a black housing finish, and PoE simplicity are the driving factors. The 6MP resolution at 105.1 degrees gives meaningful coverage per camera position, and the built-in microphone on every unit removes the need for separate audio infrastructure. H.265+ compression keeps storage demands manageable on the included NVR. Where this system has limits: the 2.8mm fixed lens is wide by design, which reduces recognition distance to 15.7 metres and identification to 7.9 metres - if you need to read faces or number plates at longer distances, a narrower lens or a dedicated ANPR camera would serve better. The cameras do not include a built-in speaker, so two-way audio communication from a remote viewer is not supported. If colour night vision without IR is a requirement, a full-colour or TiOC variant would be more appropriate. Available through Security Australia with the NVR included.

Complete Package Contents

• 8 x Hikvision DS-2CD2366G2-IU BLACK - 6MP AcuSense outdoor turret camera, 2.8mm fixed lens, 105.1° HFOV, 30m IR, IP67, built-in microphone, PoE (802.3af) / 12V DC
• 1 x Hikvision DS-7608NI-I2-8P - 8-channel NVR with 8 built-in PoE ports, supports up to 8MP cameras, H.265+ recording

Before You Buy

Quick Fit Check

• Good match if: You need to cover 8 or more external camera positions across a property and want AcuSense human/vehicle filtering to keep alert volumes manageable - especially on sites with trees, animals, or traffic near camera views.
• Good match if: The installation requires black-housing cameras to match a dark fascia or design brief, and a PoE NVR is the preferred architecture to avoid running separate power to each camera head.
• You may need a different model if: Any camera position requires colour night vision without switching to infrared, or if you need to identify faces and number plates beyond 8-15 metres - a full-colour turret kit or a system with selectable lens lengths across positions would serve those requirements better.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need 8 IP cameras in black housing with AcuSense filtering and a PoE NVR in a single coordinated purchase - particularly where alert noise reduction across multiple zones is more important than colour night vision.
• You may need a different model if: Colour night vision is a requirement at all positions, or if any camera location needs to identify faces or number plates beyond 8-10 metres - a full-colour turret kit or a system with longer focal length options would better suit those scenarios.
• Pairs well with: A surveillance-grade NAS or additional NVR storage expansion for sites needing extended retention periods, or a PoE network switch if you plan to expand beyond 8 cameras using the same NVR network port.

Common Questions

1. Does the NVR in this kit include a hard drive?

   No. The DS-7608NI-I2-8P ships without a hard drive installed. You will need to purchase a compatible surveillance-grade HDD separately before the system can record. Storage requirements depend on your retention period, compression settings, and how many cameras are recording continuously - at 6MP with H.265+ across 8 cameras, plan for a minimum of 4TB for around 7 days of continuous recording as a rough guide.

2. Will this kit work if I only want to install 6 cameras now and add 2 later?

   Yes. The 8-channel NVR supports any number of cameras up to its 8-channel maximum, so you can commission 6 cameras at installation and add the remaining 2 DS-2CD2366G2-IU units at a later date. Each camera connects to its own PoE port on the NVR - unused ports remain dormant until a camera is added. Ensure cable runs for future positions are pre-wired during the initial installation to avoid disruption later.

3. What does AcuSense actually do differently from standard motion detection?

   AcuSense uses a deep learning algorithm running on the camera chip to classify detected movement as human, vehicle, or neither before an alert is sent. Standard motion detection triggers on any pixel change in the frame - including wind-blown trees, rain, insects near the lens, or a passing cat. AcuSense filters those out and only sends an alert when the camera classifies the moving object as a person or a vehicle. This is a camera-side function, not an NVR-side post-processing step, so it works with the included DS-7608NI-I2-8P NVR.

4. Can I identify number plates or faces with the 2.8mm cameras in this kit?

   Not reliably at distance. The DORI identification distance for the 2.8mm lens is 7.9 metres, and recognition distance is 15.7 metres. These values mean the camera can capture enough detail to recognise a face or read a plate at close range, but not from across a car park or at a driveway entry where vehicles are more than 8-10 metres from the camera. If plate capture or face detail at greater distances is needed, a dedicated ANPR camera or a turret with a longer focal length lens is a better fit - Security Australia stocks both.

5. Does the built-in microphone support two-way audio - can I talk through the camera remotely?

   No. The DS-2CD2366G2-IU has a built-in microphone only - there is no built-in speaker in these cameras. Audio is recorded from the camera's location alongside video, and you can listen back through the NVR or a remote viewing app, but you cannot transmit audio out through the camera to speak to someone on-site. If two-way communication at a specific point is needed, a camera with both a built-in microphone and built-in speaker would be required at that position.

6. How far can each camera cable run from the NVR?

   Up to 100 metres per cable run using Cat5e or Cat6 cable, which is the standard PoE Ethernet limit. The NVR's built-in PoE ports supply both power and data over that single cable to each camera. If any camera position is beyond 100 metres from the NVR, a PoE extender or mid-span switch would be needed for that run - plan cable routes before installation to keep all runs within this limit.

7. Do these cameras record in colour at night or switch to black and white?

   They switch to black and white at night. The DS-2CD2366G2-IU uses infrared illuminators for night vision, which produces monochrome footage in low or zero-light conditions. The minimum illumination of 0 Lux with IR means the camera maintains a usable image in complete darkness, but the image will be greyscale. If colour night vision is a requirement at any position - for example, to capture clothing colours or vehicle colour at night - a full-colour or TiOC variant camera would be needed at those specific locations.

Cabling Considerations

• Cable Type: Cat5e minimum, Cat6 recommended for all 8 camera runs. Use shielded (STP/FTP) cable in areas near high-voltage cabling or in exposed outdoor conduit runs.
• Max Cable Run: 100 metres per run from NVR PoE port to camera. Measure actual wall/ceiling routing distance, not straight-line distance - real runs are almost always longer than they appear on a floor plan.
• PoE Notes: The DS-7608NI-I2-8P provides PoE IEEE 802.3af across 8 ports with a total PoE budget of 80W. Each DS-2CD2366G2-IU draws approximately 6.5W, so all 8 cameras running simultaneously are within the budget. No external PoE injector is required.
• Wiring Tips: Pre-run all 8 cable tails to camera mounting positions before the NVR is racked - it is significantly harder to add or re-route cables after fitoff. Leave a 600mm service loop at each camera end to allow for repositioning the head during angle adjustment. Label each cable at both ends before terminating.

Downloads & Resources

No downloads available for this product.