Hikvision DS-7608NI-M2/8P 8ch PoE CCTV NVR, 128Mbps 8 PnP ports, 4K, 2 HDD Bay NO HDD

Model: DS-7608NI-M2/8P-NOHDD

Who This Is For

When clean PoE cabling and high-resolution recording are the priority, the DS-7608NI-M2/8P sits in a practical spot for installers specifying 8-channel systems for commercial sites, retail premises, small warehouses, and multi-tenancy buildings. The 8 built-in PoE ports handle power and data over a single Cat cable run per camera, keeping rack space and wiring costs lean. The recorder supports a maximum decode resolution of 8K via HDMI, which means it stays relevant as sites upgrade cameras over time rather than requiring an NVR swap. Two SATA bays accommodate dual HDDs for mirrored or expanded storage, and the 128 Mbps incoming bandwidth handles a full 8-channel load of high-resolution streams without bottlenecking. Supplied without a hard drive, this unit suits installers who want to specify their own drives based on retention requirements at the time of build.

What This NVR Actually Does

Who Buys This Model

• Security Installers: Specifying a clean, all-in-one 8-channel PoE head-end for commercial fit-outs where a separate PoE switch would add cost and rack space. The 8 built-in PoE ports cover a full camera count in a single 1U unit.
• IT Managers at Multi-Site Businesses: Deploying standardised NVR hardware across retail outlets or office locations, selecting their own surveillance-grade HDDs to match each site's retention schedule rather than accepting bundled storage.
• Small Warehouse and Logistics Operators: Running high-resolution cameras across loading docks, entry points, and internal areas where the 8K-capable HDMI output supports a local monitoring station with full-detail playback.
• Facilities Managers Upgrading Ageing DVR Systems: Moving from analogue to IP on an 8-camera site and wanting an NVR that handles 4K and higher resolution cameras without needing an immediate swap if cameras are upgraded later.

Honest Assessment

The DS-7608NI-M2/8P does the core job of an 8-channel commercial NVR well. The integrated PoE ports remove the need for a separate switch, the 128 Mbps incoming bandwidth handles demanding multi-channel 4K streams, and H.265+ compression keeps storage requirements in check. The dual SATA bay gives installers drive flexibility, and the 8K HDMI output provides headroom for future camera upgrades without forcing an NVR replacement. Available through Security Australia, this unit suits straightforward 8-camera commercial and light-industrial installations where a compact 1U form factor matters. Where it will not suit: sites that need to grow beyond 8 channels should look at 16-channel or 32-channel NVR options. Sites requiring built-in RAID for critical data protection will find 2 bays limiting. It is also supplied without HDDs, so drive procurement is a separate step that must be planned before the site goes live.

Before You Buy

Quick Fit Check

• Good match if: You are deploying exactly 8 IP cameras and want a single 1U unit that powers and records all channels without a separate PoE switch in the rack.
• Good match if: Your site runs or plans to run 4K cameras and you need an NVR with sufficient incoming bandwidth (128 Mbps) and an 8K-capable HDMI output for a local monitoring display.
• You may need a different model if: Your site requires more than 8 camera channels now or in the near term - a 16-channel or 32-channel NVR from the Hikvision range would be the more appropriate product type to review.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need an 8-channel PoE NVR with built-in PnP ports, 4K and higher resolution support, and the flexibility to fit your own HDDs - all in a 1U rack unit without a separate switch.
• You may need a different model if: Your site has more than 8 cameras now or is likely to expand - a 16-channel or 32-channel NVR would be the more appropriate product type to consider on securityaustralia.com.au.
• Pairs well with: Hikvision 4K or 8MP IP turret, dome, or bullet cameras connected via Cat5e or Cat6 directly to the PoE ports, and a pair of surveillance-rated 3.5-inch SATA HDDs sized to your required retention period.

Common Questions

1. Does this NVR come with hard drives included?

   No. The DS-7608NI-M2/8P-NOHDD is supplied without any hard drives fitted. The unit has 2 SATA interfaces that accept standard 3.5-inch surveillance-grade HDDs. You will need to purchase drives separately and size them based on your channel count, resolution, frame rate, and required retention period before the system can record.

2. Do I need a separate PoE switch to power cameras?

   No. The NVR has 8 built-in PoE ports that power and connect cameras directly over a single Cat5e or Cat6 cable run per camera. No external PoE switch is required for a standard 8-camera installation. This simplifies the head-end installation and reduces the number of powered devices in the cabinet.

3. Will this NVR work with 4K cameras?

   Yes. The DS-7608NI-M2/8P supports a maximum input resolution of 8K (7680 x 4320), so 4K cameras operate well within its capability. The 128 Mbps incoming bandwidth is sufficient to handle a full 8-channel load of 4K streams under H.265+ compression. The HDMI output also supports up to 8K for local display.

4. What is the decoding capability of this NVR?

   The NVR decodes 2 channels at 32 MP (30 fps) or 4 channels at 8 MP (30 fps). This spec defines what the NVR can render simultaneously on the local HDMI display at full frame rate. For sites running 4K (8 MP) cameras across all 8 channels, be aware that full live-view decoding at the highest resolution is constrained to 4 simultaneous streams at 30 fps.

5. Can I access this NVR remotely from a phone or computer?

   Yes. The NVR supports remote access via Hikvision's mobile and desktop client software, allowing live view and playback of recorded footage from a phone, tablet, or PC. Remote access requires the NVR to be connected to a network with appropriate port forwarding or cloud access configured during setup.

6. Is this NVR compatible with non-Hikvision cameras?

   Partially. The 8 built-in PoE ports use Hikvision's Plug-and-Play protocol, which is optimised for Hikvision IP cameras. Third-party cameras that support ONVIF Profile S can typically be added via the NVR's network interface, but advanced features such as smart event triggers and AI analytics are generally only available with compatible Hikvision cameras. For full feature access, pairing with Hikvision cameras is recommended. The full camera range compatible with this unit is stocked by Security Australia.

Downloads & Resources

No downloads available for this product.