Hikvision Acusense DS-2CD2366G2-IU IP Camera 6MP Turret Network Camera BLACK

Model: DS-2CD2366G2-IU NOSTROBE-BLACK

Who This Is For

When reducing nuisance alerts is the priority for an eave, soffit, or wall-mounted outdoor camera, the Hikvision DS-2CD2366G2-IU in black is the model most installers reach for. It suits residential properties, small commercial premises, and body corporate installations where the camera needs to blend into a dark fascia while delivering 6MP resolution across a wide 105.1-degree field of view. AcuSense deep-learning classification filters out animals, foliage, and passing traffic, sending alerts only when a person or vehicle is confirmed in frame. The built-in microphone captures on-site audio without needing a separate device. At 30 metres of IR range and an IP67 rating, it handles exposed outdoor positions - driveways, car parks, building entries - where weather conditions vary. The black housing makes it a practical choice wherever a white camera would stand out against dark cladding, timber, or rendered surfaces.

What This Camera Actually Does

Who Buys This Model

• Residential installers: Fitting cameras to dark-coloured fascia, timber cladding, or charcoal rendered homes where a white housing would stand out against the building's exterior finish.
• Body corporate managers: Specifying shared driveway or car park coverage where AcuSense classification reduces the volume of alert notifications forwarded to building management.
• Small business owners: Covering a single entry, rear lane, or outdoor storage area at a shop or warehouse and wanting a wide-angle 6MP image without running a separate power cable from a nearby 12V source.
• Security integrators on Hikvision NVR systems: Adding cameras to an existing Hikvision ecosystem where AcuSense analytics are already configured at the recorder, keeping the system brand-consistent and reducing setup time.

Honest Assessment

The DS-2CD2366G2-IU performs well where AcuSense classification and wide-angle 6MP coverage are the primary requirements. The 105.1-degree field of view handles most residential entry and car park positions from a single mounting point, and the 120dB WDR manages backlit scenes that would clip a standard camera. AcuSense is genuinely effective at reducing false alerts - it is a confirmed deep-learning classification engine, not basic pixel-change motion detection. The built-in microphone adds practical audio capture without extra hardware. What this camera will not do is provide active deterrence - the NOSTROBE variant has no white-light flash or siren. If a visible strobe response triggered by AcuSense detection is part of the brief, the strobed variant of this model serves that purpose. For long-approach coverage beyond 30 metres, a bullet camera with extended IR range is a better fit. Available through Security Australia, this model suits standard eave and soffit installs where passive 6MP monitoring is the goal.

Before You Buy

Quick Fit Check

• Good match if: You are mounting on a dark-coloured eave or soffit and need a wide 105.1-degree view at 6MP - the black housing and 2.8mm fixed lens are sized for exactly this position without any additional housing modification.
• Good match if: Your Hikvision NVR supports AcuSense analytics and you want classification-based alerts rather than standard motion triggers - this camera delivers confirmed deep-learning human and vehicle detection at the camera level.
• You may need a different model if: The installation requires active deterrence with a strobe or siren on detection - a TiOC or AcuSense camera with integrated white-light output from the Security Australia range would be the appropriate product type for that application.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need confirmed AcuSense deep-learning classification at 6MP resolution in a black housing for a wall, eave, or soffit mount with standard 802.3af PoE and no strobe requirement.
• You may need a different model if: Active deterrence is part of the brief - a TiOC-type camera with integrated white-light strobe and speaker triggered by AcuSense detection is the appropriate product type for sites where the camera is expected to respond to intrusions, not just record them.
• Pairs well with: A Hikvision AcuSense-compatible NVR - the analytics configured at the camera level are surface through the NVR's event management interface, so the alert workflow operates end-to-end without third-party middleware.

Common Questions

1. Does this camera support two-way audio so I can speak to someone at the door?

   No. The DS-2CD2366G2-IU includes a built-in microphone for audio capture, but there is no built-in speaker. Inbound audio from the camera to your NVR or viewing device works, but outbound audio from your NVR to the camera position requires a separate externally wired speaker. If two-way communication at the camera point is a firm requirement, a camera with both a built-in microphone and built-in speaker is needed.

2. Will this camera trigger alerts when my dog walks past the sensor?

   No - AcuSense is specifically designed to prevent this. The camera uses deep-learning classification to confirm whether a detected object is a person or a vehicle before sending an alert. Animals, foliage movement, and changes in ambient light are not classified as human or vehicle targets and do not trigger AcuSense notifications. Standard motion detection can still be configured separately if needed, but AcuSense event alerts will not fire for pets.

3. What does IP67 mean and is it suitable for exposed outdoor positions in Australian conditions?

   Yes. IP67 means the camera is fully dust-tight (6) and protected against temporary immersion in water up to 1 metre for 30 minutes (7). In practical terms it handles direct rain, hose-down cleaning, coastal humidity, and dusty environments without issue. It is rated for standard outdoor use including exposed eave mounts and wall positions without additional weatherproofing enclosures.

4. What can I actually identify at the camera's 30-metre IR range?

   At 30 metres you are at or beyond the detection threshold. The confirmed DORI values for the 2.8mm lens are: Detection at 78.6m (something is present), Observation at 31.2m (posture and direction visible), Recognition at 15.7m (familiar face distinguishable), and Identification at 7.9m (unknown face clearly identifiable). For evidential facial identification, subjects need to be within approximately 8 metres of the camera. The 30m IR range ensures the scene is illuminated, but usable identification detail depends on how close to the camera the subject actually is.

5. Does this camera work with non-Hikvision NVRs?

   Partially. The camera streams standard RTSP and is ONVIF-compatible, so basic live view and recording will work with most third-party NVRs. However, AcuSense analytics events - the human and vehicle classification alerts - are proprietary to Hikvision's platform. On a third-party NVR you will receive standard motion detection events only, not AcuSense-classified notifications. Full AcuSense functionality requires a compatible Hikvision NVR or iVMS-4200 software.

6. Is this the same camera as the white version, just in a different colour?

   Yes, functionally identical. The DS-2CD2366G2-IU NOSTROBE-BLACK shares the same sensor, lens, IR, AcuSense engine, IP67 rating, and PoE specification as the white variant. The only difference is the housing colour. Installers sometimes order both colours on the same site to match different surfaces - dark fascia positions take the black unit while light-coloured soffits take the white. The Security Australia range stocks both variants for this reason.

7. How much storage will a 6MP H.265+ stream consume on my NVR?

   It depends on scene activity and quality settings, but as a practical guide: a single 6MP camera running H.265+ at typical outdoor bitrates will consume roughly 15-25GB per day under normal conditions. H.265+ reduces this further than standard H.265 by applying predictive encoding across static background areas. For a 30-day retention target across 4 cameras, plan for a minimum of 2TB of NVR storage and size up if the scene is high-movement or if you are recording at maximum bitrate continuously.

Downloads & Resources

No downloads available for this product.