Hikvision DS-PM1-RT-HWB AX Hybrid Tri-X Wireless Receiver

Model: DS-PM1-RT-HWB

Who This Is For

Security installers adding wireless coverage to sites where running cable is impractical, costly, or simply not possible will find the DS-PM1-RT-HWB a practical fit. This is a Tri-X wireless receiver module designed to plug into a Hikvision AX Hybrid or AX PRO panel and receive signals from wireless detectors and peripherals across distances up to 1.2 km in open areas. It operates at 433 MHz and is rated IP65, making it suitable for installations that extend into outdoor zones, sheds, gates, or outbuildings - anywhere a hardwired zone would add significant labour cost. Electricians and security technicians commissioning multi-building rural properties, large commercial warehouses, or school campuses with spread-out buildings will recognise this as the component that makes wireless zone extension genuinely practical rather than a compromise. It runs on DC 12V and draws around 200mA, meaning it can be powered directly from a panel or auxiliary supply without a dedicated power source.

What This Device Actually Does

Who Buys This Model

• Security technicians on rural and agricultural properties: Where sheds, machinery areas, and gates are spread across hundreds of metres, the 1.2 km open-area range allows wireless detectors to be placed without trenching cable across paddocks or driveways.
• Installers upgrading existing AX Hybrid panels: Sites already running a Hikvision AX Hybrid panel that need additional wireless zone capacity without replacing the panel or adding a second controller use this module to extend the system natively.
• Commercial and industrial site installers: Warehouses, logistics yards, and factories with metal structures and roller doors often have areas where running cable is complex or costly - the IP65-rated receiver can be mounted externally to bridge those gaps.
• Multi-building campus security: Schools, aged care facilities, and light industrial parks with multiple buildings where a single wired panel serves the main structure but outbuildings require wireless zone coverage benefit from placing receivers in each building.

Honest Assessment

The DS-PM1-RT-HWB does one job well - it extends the wireless detection range of a Hikvision AX Hybrid or AX PRO alarm system to locations where hardwiring would be impractical. The IP65 rating and 1.2 km open-area range specification are genuine practical advantages for rural, industrial, and multi-building deployments. The DC 12V, 200mA power requirement is modest and easy to plan around during installation design.

It will not work as a standalone receiver or with third-party alarm panels - it is purpose-built for the Hikvision AX ecosystem. If your site requires a panel-agnostic wireless receiver, or if the installation involves a different alarm platform entirely, this module will not integrate. For sites that need to bridge very long distances through dense masonry or multiple internal walls, real-world range may fall well short of the 1.2 km open-area specification and repeater placement planning will be required. The DS-PM1-RT-HWB is available through Security Australia alongside the AX Hybrid panels and compatible wireless detectors it is designed to work with.

Before You Buy

Quick Fit Check

• Good match if: You are running a Hikvision AX Hybrid or AX PRO panel and need to add wireless detectors in an outbuilding or external area that is impractical or too costly to cable - the IP65 housing and 433 MHz Tri-X reception make this a direct fit.
• Good match if: Your installation site is an open rural property or logistics yard where detectors need to be placed across distances approaching 1.2 km from the panel location and a direct cable run is not viable.
• You may need a different model if: Your alarm panel is from a different manufacturer or is an older Hikvision platform that does not support the AX Hybrid architecture - a panel-compatible wireless receiver module from the correct product family will be required instead.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: Your site runs a Hikvision AX Hybrid or AX PRO panel and you need to extend wireless zone coverage to a remote building, outdoor area, or zone where cable installation is not practical - the IP65 housing and 433 MHz Tri-X protocol make this the direct solution within that ecosystem.
• You may need a different model if: Your alarm panel is from a different manufacturer or uses a different wireless protocol - a receiver module that matches your panel's specific wireless standard will be required instead.
• Pairs well with: Hikvision AX PRO or AX Hybrid wireless detectors (PIRs, door contacts, smoke detectors) and a compatible AX Hybrid panel as the host controller.

Common Questions

1. Will this receiver work with any alarm panel, or only Hikvision AX systems?

   Only Hikvision AX Hybrid and AX PRO panels. The DS-PM1-RT-HWB uses Hikvision's proprietary Tri-X wireless protocol operating at 433 MHz, which is not compatible with third-party alarm platforms or legacy Hikvision panels that predate the AX product family. Attempting to use it with a non-AX panel will result in the device not being recognised during enrolment.

2. Does this receiver work outdoors?

   Yes. The DS-PM1-RT-HWB carries an IP65 rating, meaning it is protected against dust ingress and water jets from any direction. It can be mounted externally under eaves, on external walls, or inside outdoor enclosures across an operating temperature range of -10°C to +55°C - covering the climate conditions encountered across most of Australia.

3. What is the realistic wireless range through walls and buildings?

   Significantly less than 1.2 km. The 1.2 km specification is measured in open air with no obstructions. In practice, each brick or concrete wall typically reduces effective range by 50-80% depending on material density. For installations through multiple internal walls or floors, conducting a site survey with a test detector before finalising receiver placement is strongly recommended. For dense building layouts, a second receiver positioned as a relay point may be needed.

4. How is the DS-PM1-RT-HWB powered?

   It runs on DC 12V and draws approximately 200mA. It can typically be powered directly from the auxiliary 12V output of a compatible AX Hybrid panel if the cable run between the panel and receiver is within the voltage drop tolerance for the cable gauge used. For receivers mounted at longer distances from the panel, a local 12V power supply is a more reliable approach to ensure the voltage at the receiver stays within spec.

5. How many wireless devices can be enrolled through this receiver?

   The device capacity per receiver is governed by the AX Hybrid or AX PRO panel's total wireless zone limit rather than a fixed number stored on the receiver itself. Check the specifications of your specific AX panel model to confirm total wireless zone capacity and how many receiver modules it supports simultaneously. The panel documentation details the maximum enrolled devices per receiver module and overall.

6. Does this receiver require any software or licence to operate?

   No separate software licence is required. Once enrolled into a compatible AX Hybrid or AX PRO panel, the receiver and its attached wireless devices appear natively within the panel's zone management interface. Configuration is handled through the panel's standard setup process. Ensure your panel firmware is current before enrolment - stocked by Security Australia alongside compatible AX panels and wireless detectors, so confirming firmware compatibility before ordering is straightforward.

Cabling Considerations

• Power Cable: 2-core figure-8 or security cable suitable for 12V DC at 200mA - minimum 0.5mm² conductor recommended for runs up to 20 m from the power source.
• Max Power Cable Run: Calculate voltage drop based on conductor gauge and run length. For runs exceeding 20-25 m from a 12V supply, use 0.75mm² or 1.0mm² cable, or install a local 12V supply at the receiver location to avoid under-voltage at the device.
• Data Connection: The DS-PM1-RT-HWB communicates with the AX Hybrid panel via wired bus connection. Confirm the bus cable type and maximum bus run length specified in your AX panel installation manual - typically 4-core security or alarm cable.
• Wiring Tips: Keep power and bus wiring away from 240V AC mains cables to avoid interference. If mounting the receiver externally, use weatherproof cable entry glands and seal all external penetrations to maintain the IP65 integrity of the mounting location.

Downloads & Resources

No downloads available for this product.