Hikvision DS‑2XE6845G0-IZHS(B) | 4 MP Explosion-Proof Bullet Camera

Model: DS-2XE6845G0-IZHS

Who This Is For

When hazardous area compliance is the priority and standard surveillance hardware simply cannot be installed, the Hikvision DS-2XE6845G0-IZHS is the camera that meets the brief. Designed for Zone 1 and Zone 21 classified environments - oil and gas facilities, chemical processing plants, grain storage, paint shops, and offshore platforms - this 4MP explosion-proof bullet camera carries the ATEX and IECEx certifications required by Australian and international hazardous area regulations. Its motorised varifocal lens handles focal length adjustment without physical access to the housing, which matters in environments where intrusive work requires permits. The built-in heater keeps the unit operational at temperatures as low as -60°C, making it viable for cold-climate industrial sites and refrigerated hazardous storage. If your project specification requires certified explosion-proof CCTV coverage with low-light capability and remote zoom adjustment, this is the model to evaluate.

What This Camera Actually Does

Who Buys This Model

• Oil and Gas Facilities: Refineries, gas processing plants, and offshore platforms specifying ATEX/IECEx-certified cameras for Zone 1 classified areas where flammable gas or vapour may be present under normal operating conditions.
• Chemical Processing Plants: Security and EHS teams covering process areas, storage tanks, and loading bays where solvent or chemical vapour exposure makes standard camera housings non-compliant.
• Grain and Flour Handling Facilities: Operations managers in grain silos, flour mills, and agricultural processing sites where combustible dust creates Zone 21 classified environments requiring certified equipment.
• LNG and Cold-Climate Industrial Sites: Projects in northern Australia, offshore, or refrigerated hazardous storage where the -60°C rated heater and explosion-proof certification are both required simultaneously.
• Industrial Security Integrators: Specialist installers and systems integrators working on hazardous area CCTV projects who need documented ATEX/IECEx certification for compliance sign-off and project handover documentation.

Honest Assessment

The DS-2XE6845G0-IZHS does the hard thing well: it delivers a certified explosion-proof enclosure, DarkFighter low-light imaging, motorised remote zoom, and extreme-temperature operation in a single unit. For hazardous area projects that require ATEX Zone 1 and IECEx compliance alongside practical surveillance capability, it removes the need to compromise between certification and image performance. The corrosion resistance and IP68 rating add longevity in harsh outdoor industrial environments that would degrade standard cameras quickly. What this camera will not do is serve general industrial or commercial sites where explosion-proof certification is not required - in those applications, a standard industrial bullet or turret camera will deliver the same image quality at considerably lower cost. This is also a specialist product that warrants careful zone classification review before specification. The DS-2XE6845G0-IZHS is available through Security Australia for projects with confirmed hazardous area requirements.

Before You Buy

Quick Fit Check

• Good match if: Your site has a confirmed ATEX or IECEx Zone 1 or Zone 21 area classification and you need 4MP surveillance coverage with DarkFighter low-light performance and remote motorised zoom adjustment.
• Good match if: The installation involves extreme cold environments (down to -60°C) combined with a hazardous area classification, where the built-in heater and certified enclosure are both operationally necessary.
• You may need a different model if: Your site is a standard industrial or outdoor commercial environment without a formal hazardous area classification - a heavy-duty industrial bullet or turret camera will cover the application at a lower cost and with a wider range of compatible accessories.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: Your project has a confirmed ATEX Zone 1 or IECEx Zone 1/21 area classification, requires 4MP resolution with DarkFighter low-light performance, and needs motorised remote zoom for post-installation coverage adjustment without zone entry.
• You may need a different model if: Your site has no formal hazardous area classification - a heavy-duty industrial bullet camera without the explosion-proof enclosure will deliver comparable or superior imaging performance at a significantly lower cost and with simpler installation requirements.
• Pairs well with: An ATEX-certified or standard industrial PoE switch (deployed outside the classified zone) with sufficient PoE+ budget per port, connected via appropriately rated conduit and cable for the hazardous area installation standard.

Common Questions

1. What does ATEX Zone 1 certification actually mean for this camera?

   Zone 1 is a classified area where a flammable gas or vapour atmosphere is likely to occur in normal operation. ATEX Zone 1 certification means the DS-2XE6845G0-IZHS has been independently tested and certified to operate in that environment without being a source of ignition - either by containing any internal fault energy or by being constructed to prevent ignition propagation. This is a regulatory compliance requirement in Australia for electrical equipment installed in such areas, not simply an IP or weather rating.

2. Does this camera work in Zone 2 classified areas as well as Zone 1?

   Yes. A Zone 1 certified device is also compliant for use in Zone 2 areas, since Zone 1 represents a more demanding classification. If your area classification document shows Zone 2 (where flammable atmosphere is unlikely in normal operation but may occur abnormally), this camera exceeds the minimum certification requirement for that zone. The same logic applies to Zone 21 versus Zone 22 for combustible dust environments.

3. Will this camera work with a standard PoE switch, or does it need PoE+?

   It requires IEEE 802.3at PoE+ (up to 30W per port), not standard IEEE 802.3af PoE (15.4W). Standard PoE switches will not supply sufficient power, particularly when the built-in heater is active in cold conditions. Confirm your switch or injector is rated for PoE+ on every port connected to this camera. Also note that the PoE switch itself must be located outside the classified zone and connected via appropriately rated cabling and conduit entry methods for the hazardous area.

4. How does DarkFighter perform in a poorly lit industrial environment at night?

   DarkFighter is Hikvision's sensor and processing technology designed to produce colour imaging in low-light conditions where standard cameras would default to black and white or produce heavily noisy images. Combined with the 1/1.8" large-format CMOS sensor, the camera captures meaningful colour detail in near-dark environments. For complete darkness, the 40m IR illuminator provides monochrome coverage. The result is that most dimly lit industrial environments - including partial lighting from safety and emergency fixtures - will return usable colour footage.

5. Can the lens be adjusted after installation without entering the hazardous zone?

   Yes. The motorised varifocal lens (2.8-12mm) is adjustable remotely via the camera's web interface or a compatible NVR. This is a practical advantage in classified areas where physical access for lens adjustment would require a work permit or zone entry procedure. Zoom and focus can be set from outside the zone during commissioning or adjusted remotely if the coverage requirement changes.

6. Does the built-in heater activate automatically, and what temperature does it operate down to?

   Yes. The integrated heater activates automatically based on ambient temperature and maintains camera operation across a range of -60°C to +60°C. No manual configuration is required for the heater to function. This is particularly relevant for installations in LNG facilities, cold-climate mining, or refrigerated hazardous storage where standard industrial cameras typically fail to maintain reliable operation below -30°C to -40°C. The heater draw is factored into the PoE+ power budget requirement for this model. The DS-2XE6845G0-IZHS is stocked by Security Australia for projects requiring this combination of cold-climate and hazardous area performance.

7. Is the corrosion resistance rated to a specific standard, and does it affect the enclosure's explosion-proof certification?

   The corrosion-resistant construction uses housing materials appropriate for exposure to industrial chemical atmospheres and marine environments, which complements the IP68 ingress protection rating. The explosion-proof certification under ATEX and IECEx remains valid regardless of the corrosion-resistant treatment - the two properties address different hazards independently. If your site has specific corrosion requirements documented in a materials selection report, confirm the camera's housing specification against that document during the design phase.

Downloads & Resources

No downloads available for this product.