Hikvision DS-2TX3636-25A/V1 Thermal Smart Linkage Tracking System

Model: DS-2TX3636-25A/V1

Who This Is For

For security integrators and critical infrastructure operators who need long-range perimeter detection with active automated tracking across large, open sites, the Hikvision DS-2TX3636-25A/V1 Thermal Smart Linkage Tracking System is a purpose-built solution. It combines a thermal imaging core - capable of detecting humans at 250 m and vehicles at 750 m - with up to 400 m IR supplemental lighting, and a master-slave linkage architecture that ties thermal detection triggers directly to tracking responses. This makes it directly relevant for applications such as water treatment facilities, power substations, remote mine sites, port perimeters, and correctional facility boundaries where conventional optical cameras fail in total darkness or adverse weather. The system supports simultaneous tracking of up to 30 targets, switches between manual and auto tracking modes, and operates across a rated temperature range of -40 degrees C to 70 degrees C with IP66 and IK10 protection - built for environments where standard cameras are not viable.

What This System Actually Does

Who Buys This Model

• Critical Infrastructure Security Teams: Power generation, water treatment, and telecommunications sites where perimeter detection must operate through the night and in adverse weather - and where a missed intrusion has regulatory or safety consequences.
• Port and Logistics Security Integrators: Waterfronts and container yards with long fence lines, vehicle movements at all hours, and mixed human-vehicle traffic requiring classification-based alarm rules rather than raw motion.
• Mining and Remote Site Operators: Remote processing facilities and mine gates where -40 degrees C operating capability, lightning protection, and IK10 housing are baseline requirements, not premium additions.
• Correctional and High-Security Facility Designers: Perimeter systems where simultaneous tracking of multiple individuals across a boundary line is a core operational requirement, and where manual tracking override capability must remain available to control room operators.
• Defence and Government Security Contractors: Installations requiring long-range thermal detection beyond what standard IR cameras deliver, with audit-ready H.265 video compression and 2-channel alarm input integration into existing PSIM or control room infrastructure.

Honest Assessment

The DS-2TX3636-25A/V1 does several things genuinely well at the high end of perimeter security. The sub-1-second linkage switch time is operationally meaningful - slower systems let fast-moving targets exit the optical camera's frame before lock-on occurs. The 30-target simultaneous tracking capability combined with human and vehicle classification makes this appropriate for complex sites where multiple simultaneous detections are routine, not exceptional. The operating temperature range and TVS 6000V lightning protection address real deployment challenges in remote Australian environments. What this system will not do is serve as a general-purpose surveillance camera - the 25 mm fixed lens produces a 14.88 by 11.19 degree field of view, which is narrow by design for long-range work but unsuitable for monitoring a building entrance or car park at close range. It also requires 24 VAC power, not PoE, which adds infrastructure cost and planning time. For sites needing broad-area optical coverage at shorter ranges, a separate optical PTZ or fixed camera system available through Security Australia would complement this unit rather than replace it.

Before You Buy

Quick Fit Check

• Good match if: You are securing a long open perimeter - fence line, waterfront boundary, or remote site entry approach - where thermal detection out to 750 m for vehicles and 250 m for humans needs to automatically hand off to optical tracking without operator input.
• Good match if: Your site operates in conditions that regularly defeat optical cameras - complete darkness, fog, dust, or temperature extremes - and you need a NETD of less than 40mK to maintain detection reliability where visible-light imaging fails.
• You may need a different model if: Your primary requirement is wide-area optical coverage at short to medium range, or if you need PoE-powered deployment - a standard optical PTZ camera or a bullet camera with long-range IR would be a more cost-effective and practically simpler solution for those scenarios.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: Your detection requirement extends to 250 m for humans or 750 m for vehicles, you need thermal performance in zero-light or adverse weather conditions, and your site justifies a 24 VAC-powered master-slave linkage architecture with simultaneous multi-target tracking.
• You may need a different model if: Your detection distances are under 100 m and adequate lighting exists - a high-resolution optical PTZ camera with long-range IR will deliver superior identification-quality imagery at a lower system cost for those shorter-range scenarios.
• Pairs well with: A compatible optical PTZ camera configured as the slave unit to receive and act on linkage triggers from this thermal master - the combination delivers thermal detection at range and optical zoom-in for verification and recording.

Common Questions

1. Does this thermal camera work in complete darkness with no lighting at all?

   Yes. The thermal imaging core detects heat signatures from targets - it does not require any ambient light, infrared illumination, or visible-spectrum lighting to function. The 384 x 288 vanadium oxide sensor with a NETD of less than 40mK at 25 degrees C will detect a person at up to 250 m in total darkness. The 400 m IR supplemental light applies to the optical camera component used for identification after the thermal system triggers a linkage event.

2. What does NETD less than 40mK actually mean for detection performance?

   It means the sensor can resolve temperature differences as small as 0.04 degrees C between adjacent pixels. In practical terms, a person wearing dark clothing against a cool background - a scenario that defeats many standard thermal cameras with higher NETD ratings - still produces a detectable thermal contrast signature. Lower NETD values indicate higher thermal sensitivity; 40mK is a strong performance figure for an uncooled sensor at this price tier.

3. How does the master-slave linkage actually work between the thermal and optical cameras?

   The thermal unit acts as the master, continuously scanning the scene for thermal signatures. When a configured detection rule fires - intrusion or line crossing - the system sends a linkage command to the connected optical camera slave unit in under 1 second. The slave unit slews to the coordinates of the detected target and locks on. Tracking can run in auto mode where the system maintains lock independently, or operators can switch to manual mode to take direct control of the optical camera's aim point.

4. Will this camera track 30 targets at the same time, or does it queue them sequentially?

   Simultaneously. The system maintains tracking on up to 30 individual targets in parallel within a single scene. This is not a round-robin or priority-queue approach where the camera physically moves between targets - the thermal image processes all 30 tracks at once. For the linked optical camera, when multiple targets are tracked, linkage priority rules and manual override determine which target the optical unit is actively following at any given moment.

5. Does this camera require PoE or a special power supply?

   No - it requires 24 VAC, not PoE. This is an important infrastructure planning point. A dedicated transformer and 24 VAC cabling run is required to the mounting point. Standard PoE switches, PoE injectors, and PoE+ infrastructure are not compatible with this unit. Factor the transformer and appropriate cable sizing into your installation cost estimate, particularly for remote mounting positions where cable run lengths may be significant.

6. Does the thermal imaging perform well in heavy rain, fog, or dust storms?

   Better than optical cameras in those conditions, yes. The 8 to 14 micron response waveband passes through atmospheric moisture and fine particulate matter that scatters visible light and near-infrared wavelengths. Heavy rain, coastal sea fog, and fine dust significantly reduce optical camera effective range, while thermal imaging in this waveband maintains detection capability through those conditions. Very dense smoke or specific industrial emissions can attenuate long-wave infrared, so site-specific conditions should be assessed for extreme applications. The DS-2TX3636-25A/V1 is part of the Security Australia range of thermal and perimeter detection systems.

7. What is the detection distance for humans versus vehicles, and how accurate is the classification?

   The confirmed effective detection distances are 250 m for humans and 750 m for vehicles. Classification between human and vehicle targets uses deep learning algorithms applied to the thermal image stream. The classification drives alarm rule filtering - a human crossing a vehicle-only boundary triggers a different alarm type than a vehicle approaching the same line. This reduces false alarm load from non-target thermal signatures such as wildlife. Note that these are effective detection distances under good conditions; actual performance will vary with atmospheric conditions, target aspect angle, and the thermal contrast of the target against its background.

Downloads & Resources

No downloads available for this product.