Dahua DH-IPC-HFW3449EP-AS-LED-0360B 4MP Full-color Warm LED Fixed-focal Bullet WizSense Network Camera

Model: DH-IPC-HFW3449EP-AS-LED-0360B

Who This Is For

Property managers specifying outdoor coverage for areas that are unlit or poorly lit at night will find the Dahua DH-IPC-HFW3449EP-AS-LED-0360B built precisely for that brief. Unlike cameras that switch to greyscale night vision, this bullet uses a warm LED illuminator to maintain full-colour imaging at distances up to 30 metres - meaning vehicle colours, clothing, and number plates are captured in usable colour rather than monochrome. The 3.6mm fixed focal lens delivers an 80-degree horizontal field of view, which suits single-lane driveways, parking bay rows, building entrances, and alleyway approaches. WizSense AI onboard filters alerts by human and vehicle classification, so monitoring staff or app notifications are not buried in motion triggered by trees, animals, or passing headlights. With IP67 weather sealing and dual 12V DC and PoE power options, this camera suits both new cable runs and retrofits into existing infrastructure.

What This Camera Actually Does

Who Buys This Model

• Strata and Commercial Property Managers: Specifying cameras for unlit car parks, basement entries, and rear laneways where colour identification of vehicles and persons at night is a core evidentiary requirement.
• Small Business Owners: Covering shopfront approaches, roller door entries, or single-lane loading zones where a fixed 3.6mm lens provides adequate width without needing a varifocal model at higher cost.
• Security Installers on Alert-Reduction Briefs: Deploying WizSense SMD Plus classification on sites where clients have complained about excessive motion alerts from standard cameras - trees, insects, and passing traffic no longer trigger human or vehicle alarms.
• Sites Requiring Edge Recording Redundancy: Facilities where network outages are possible and a secondary local recording layer via MicroSD card is specified to ensure footage continuity without relying solely on a central NVR.

Honest Assessment

The DH-IPC-HFW3449EP-AS-LED-0360B does the full-colour night job well for a fixed bullet at this price point. The F1.0 aperture combined with the warm LED means colour is retained at 30 metres in darkness, the 4MP resolution is adequate for most entry and approach coverage scenarios, and WizSense human and vehicle classification genuinely reduces alert fatigue compared to standard motion detection. The built-in mic, alarm I/O, and MicroSD slot add meaningful flexibility without requiring additional hardware. Where this camera is not the right tool: the 3.6mm fixed lens cannot be adjusted post-installation, so if coverage distances change, the lens cannot compensate - a varifocal bullet would be more appropriate for uncertain mounting positions. The 30-metre illumination range is also the practical ceiling; for long driveways or wide open areas beyond that distance, a longer-range model or bullet with extended IR should be specified instead. Available through Security Australia for integration into Dahua-compatible NVR systems.

Before You Buy

Quick Fit Check

• Good match if: You need full-colour night coverage of a single-lane driveway, parking row, or building entry within 30 metres and want AI-filtered alerts that distinguish humans from vehicles.
• Good match if: Your installation already uses a Dahua NVR and you want edge recording redundancy via MicroSD, plus the option to wire alarm inputs to an existing sensor without additional hardware.
• You may need a different model if: Your coverage distance exceeds 30 metres, or your mounting position is not yet finalised - a varifocal bullet camera with adjustable focal length would give you more flexibility and is available in the Security Australia range.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: Your site is unlit or poorly lit at night and colour identification of people or vehicles in that darkness is an investigative or evidentiary requirement - this camera delivers that without needing a separate lighting circuit.
• You may need a different model if: Your mounting distance or angle is still being finalised, or coverage distances vary significantly - a varifocal bullet camera gives you post-installation lens adjustment that a fixed 3.6mm model cannot provide.
• Pairs well with: A Dahua WizSense-compatible NVR with SMD Plus support, which allows camera-side AI events to be displayed, searched, and filtered centrally rather than managed per-camera.

Common Questions

1. Does this camera stay in colour at night or does it switch to black and white?

   It stays in full colour. The warm LED illuminator is the sole light source in darkness and produces visible white light, which the F1.0 aperture and 0.003 Lux minimum illumination sensor converts into colour imaging out to 30 metres. There is no IR mode and no monochrome fallback - colour is maintained regardless of ambient light level. The illuminator can be set to auto or manual control via the camera interface.

2. Will this camera work with a standard PoE switch, or does it need PoE+?

   Standard PoE (IEEE 802.3af) is sufficient. The camera does not require PoE+ (802.3at). A single Cat5e or Cat6 cable carries both power and data, and the camera is also compatible with a 12V DC supply if preferred. Maximum cable run for PoE is 100 metres per standard Ethernet specifications.

3. What is the difference between the 2.8mm and 3.6mm variants, and which should I order?

   The 3.6mm variant (this model, suffix 0360B) gives an 80-degree horizontal field of view and is suited to focused coverage of a single entry point, lane, or approach path. The 2.8mm variant (suffix 0280B) widens to 103 degrees horizontal, which suits broader area coverage at shorter distances. At 3.6mm, the DORI recognition distance is 16 metres; at 2.8mm it reduces to 11.2 metres. Choose 3.6mm when your target is further from the camera; choose 2.8mm when you need to cover a wider angle at close range.

4. How does the WizSense SMD Plus detection actually reduce false alarms compared to standard motion detection?

   SMD Plus uses a deep learning model trained on human and vehicle shapes to evaluate each motion trigger before generating an alert. Standard pixel-based motion detection flags any change in the image - swaying trees, rain, insects near the lens, or headlight sweeps all trigger alerts at the same priority as a person walking through frame. SMD Plus filters those triggers: only events classified as human or vehicle pass through to the alarm output, notification, or NVR event log. Tripwire and intrusion zone rules can be set to fire only on human detections, only on vehicle detections, or both, giving installers granular control over what constitutes an alert-worthy event.

5. Does the full-colour warm LED create any issues with glare or light pollution at night?

   Yes, this is worth planning for. Unlike IR illuminators, the warm LED produces visible white light that is noticeable to people in its coverage zone. In residential areas or locations near sleeping quarters this may be undesirable or subject to local council lighting guidelines. The illuminator can be switched off manually or set to trigger only on motion, which reduces continuous light output. If the site requires covert or non-intrusive night coverage, a standard IR bullet camera would be more appropriate for that brief.

6. Can the MicroSD recording run at the same time as NVR recording?

   Yes. The camera supports simultaneous edge recording to MicroSD and network streaming to a connected NVR. The MicroSD slot accepts cards up to 256GB and operates as an independent recording layer. This is commonly configured as a failover - the card records continuously and the NVR records over the network; if the network connection drops, footage continues writing to the card without interruption. The camera is stocked by Security Australia and is compatible with Dahua NVRs that support WizSense event integration.

7. What do the DORI distances mean for this camera in a practical installation?

   DORI - Detect, Observe, Recognise, Identify - defines what level of detail is available at each distance range. For this camera at 3.6mm: detection of a human presence is possible at up to 80 metres; observing general movement and posture at up to 32 metres; recognising a person (distinguishing individuals by general features) at up to 16 metres; and identifying a person to a standard suitable for formal identification at up to 8 metres. These distances are measured under controlled conditions - real-world performance varies with lighting, camera height, and angle. For entry point coverage where identification is the goal, mount the camera so the target crosses within 8 metres of the lens.

Downloads & Resources

No downloads available for this product.