AXIS TQ6812-E Solo Kit Kit for AXIS Q6100-E and Q6300-E Panoramic Camera

Model: TQ6812-E

Who This Is For

When combining panoramic overview with directed PTZ zoom is the priority, the AXIS TQ6812-E Solo Kit gives integrators a purpose-built mechanical solution for pairing the AXIS Q6100-E 360-degree panoramic camera with the AXIS Q6300-E PTZ in a single outdoor-rated assembly. This kit is aimed at security integrators and project engineers designing wide-area surveillance systems for large commercial sites, campuses, transport hubs, and industrial facilities where one camera position must deliver both full situational awareness and the ability to zoom into specific incidents. Rather than mounting two independent cameras at separate points, the TQ6812-E creates a unified, weather-resistant installation that simplifies cabling, reduces bracket proliferation, and presents a clean, professional outcome. It is not a standalone camera - it is the structural hardware that makes the Q6100-E and Q6300-E work as a coordinated unit on a single mount.

What This System Actually Does

Who Buys This Model

• Security Integrators on Large Commercial Projects: Specifying a combined panoramic-plus-PTZ solution for a single elevated mount point, where the Q6100-E and Q6300-E are both already in the bill of materials and require a rated outdoor housing to co-locate them.
• Transport and Infrastructure Operators: Managing large open areas such as rail yards, port terminals, or airport perimeters where a single mast position must deliver 360-degree situational awareness alongside targeted zoom capability for incident verification.
• Campus and Education Facility Managers: Working with integrators on a multi-building AXIS system where rooftop panoramic and PTZ coverage needs to be consolidated at fewer physical camera positions to minimise structural penetrations and cabling runs.
• Project Engineers Completing an AXIS Q6100-E / Q6300-E Deployment: The TQ6812-E is the specific mounting accessory required to finalise the hardware configuration - purchasers are typically engineers sourcing the last component in a pre-designed AXIS camera specification.

Honest Assessment

The TQ6812-E Solo Kit does one thing well: it provides a purpose-engineered, outdoor-rated mechanical solution for co-locating the AXIS Q6100-E and Q6300-E in a single assembly. For any installation where those two cameras are already specified, this is the correct mounting hardware - designed by AXIS to ensure the cameras sit at the precise spatial relationship needed for automated PTZ-follows-panoramic tracking workflows. Build quality and outdoor rating are consistent with the AXIS accessory range available through Security Australia.

This kit will not work as a standalone product - it requires both the Q6100-E and Q6300-E to be purchased separately. It is also not interchangeable with other AXIS camera combinations. Buyers who have not yet confirmed their camera selection, or who are working with different AXIS panoramic or PTZ models, should review the full AXIS mounting accessory range before committing to this kit, as bracket and housing compatibility varies between camera families.

Before You Buy

Quick Fit Check

• Good match if: Your project specification already includes both an AXIS Q6100-E and Q6300-E and you need a rated outdoor mounting solution that co-locates them at a single elevated position.
• Good match if: You are designing a panoramic-plus-PTZ auto-tracking system where both cameras must occupy a fixed, known spatial relationship to enable accurate PTZ slew-to-target behaviour.
• You may need a different model if: You are working with AXIS panoramic or PTZ cameras outside the Q6100-E and Q6300-E family - a different AXIS mounting accessory will be required, and the broader AXIS mount range on securityaustralia.com.au covers multiple camera combinations.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: Your project specification already includes both the AXIS Q6100-E and Q6300-E and you need the purpose-built outdoor mounting hardware to co-locate them at a single position for a coordinated panoramic and PTZ system.
• You may need a different model if: You are working with different AXIS camera models - the TQ6812-E is designed exclusively for the Q6100-E and Q6300-E combination, and a different mounting accessory from the AXIS bracket range on securityaustralia.com.au will be required for other camera families.
• Pairs well with: A high-port-count managed PoE switch capable of delivering the correct PoE class to both cameras simultaneously, and an AXIS Camera Station or compatible VMS with multi-sensor display layouts for panoramic and PTZ coordination.

Common Questions

1. Does this kit include the Q6100-E or Q6300-E cameras?

   No. The TQ6812-E Solo Kit is a mounting accessory only - it contains the hardware required to co-locate and secure both cameras at a single outdoor mount position. The AXIS Q6100-E panoramic camera and AXIS Q6300-E PTZ camera must be purchased separately. Confirm both camera models are in your order before specifying this kit.

2. Will this kit work with other AXIS panoramic or PTZ cameras, not just the Q6100-E and Q6300-E?

   No. The TQ6812-E is designed specifically for the AXIS Q6100-E and Q6300-E combination. AXIS produces different mounting accessories for other camera families, and physical dimensions, attachment points, and housing geometry vary between models. Using this kit with any other AXIS cameras is not supported and may not physically align correctly.

3. Does the TQ6812-E enable automatic PTZ tracking from the panoramic camera's view?

   Yes, when configured with compatible software. Co-locating the Q6100-E and Q6300-E at a fixed, known spatial relationship - which the TQ6812-E provides - is the physical prerequisite for AXIS Camera Application Platform-based PTZ slew-to-target workflows. The panoramic camera detects movement and passes coordinates to the PTZ, which then adjusts to zoom in on the target. The software configuration and licensing for this feature are handled in the VMS or AXIS application layer, not the mount itself.

4. What is the relationship between the Q6100-E panoramic camera and the Q6300-E PTZ in this combined system?

   The Q6100-E provides 360-degree situational awareness - full scene coverage with no blind spots - while the Q6300-E provides optical zoom detail for verification of specific events or individuals detected by the panoramic camera. The TQ6812-E places both at the same physical mount point, which is necessary for the PTZ to have accurate positional reference data relative to the panoramic field of view. This pairing is a standard AXIS wide-area monitoring architecture for large open sites. The combined system is stocked by Security Australia as part of the AXIS professional camera range.

5. How many network cable runs do I need for a TQ6812-E installation?

   2 separate network cable runs are required. The Q6100-E and Q6300-E each require an individual network connection for power and data. The TQ6812-E consolidates both cameras at one physical mount point, but each camera has its own PoE network port. Plan conduit sizing to accommodate 2 cables from your switch to the mount position, and verify your PoE switch has sufficient budget for the individual power draw of both camera models simultaneously.

6. Is the TQ6812-E suitable for rooftop and elevated mast installations?

   Yes, the -E designation confirms it is rated for outdoor use. For rooftop or elevated mast positions, verify that your mounting surface or pole diameter is compatible with the kit's attachment interface. Depending on the existing infrastructure at your site - such as a round vertical pole, a parapet wall, or a flat rooftop frame - you may require an additional AXIS pole adapter or wall arm bracket to complete the installation at height.

Downloads & Resources

No downloads available for this product.