AXIS TP3101 Indoor Pendant Wall Mount – For M32-LVE & P32-V/LV Cameras

Model: AXIS TP3101

Who This Is For

Property managers specifying indoor surveillance for open-plan spaces, atriums, lobbies, or retail floors where a ceiling-mounted dome leaves blind spots will find the AXIS TP3101 solves a common positioning problem. Compatible with the AXIS M32-LVE and P32-V/LV camera series, this pendant wall mount allows an M32 or P32 series camera to be deployed on a vertical wall surface in a pendant-drop orientation - pushing the camera out and downward from the wall to achieve a better viewing angle in locations where ceiling mounting is not practical. It suits installers working in heritage buildings with no cable penetrations above the ceiling, server rooms, stairwells, and any environment where the camera needs to clear a wall obstruction or column to cover a wider floor area below.

What This Actually Does

Who Buys This Model

• Commercial Installers: Adding M32-LVE or P32-V/LV cameras in lobbies or atriums where ceiling cable runs are not feasible and wall mounting must serve the same coverage purpose.
• Facility Managers in Heritage or Tenanted Buildings: Specifying surveillance where ceiling penetrations are restricted by building rules, and all infrastructure must route along wall surfaces.
• Retail Security Designers: Positioning dome cameras on columns or feature walls to cover checkout zones, aisles, or entry areas that fall outside the reach of ceiling-mounted positions.
• Stairwell and Carpark Lift-Lobby Installers: Using pendant wall mounts in vertical shafts or enclosed stairwells where angling a camera downward from the wall is the only viable placement option.

Honest Assessment

The AXIS TP3101 does one thing well: it solves the ceiling-mounting problem for the M32-LVE and P32-V/LV camera series in a tidy, manufacturer-matched way. For installers who have already specified those camera models and hit a wall-only installation constraint, this mount removes the compromise of using a generic third-party bracket that may not align cable exits correctly or match the camera housing profile. The pendant orientation gives the camera a clear downward viewing angle from a wall surface, which is genuinely useful in stairwells, lift lobbies, and double-height retail spaces. What this will not do is work with cameras outside the M32-LVE and P32-V/LV series - it is not a universal dome mount. It is also strictly for indoor use. If the installation is outdoors or requires a different camera series, a different mounting accessory will be needed. Available through Security Australia alongside the compatible AXIS M32 and P32 series cameras.

Before You Buy

Quick Fit Check

• Good match if: You are installing an AXIS M32-LVE or P32-V/LV camera indoors and ceiling mounting is not possible - the TP3101 mounts the camera to a vertical wall surface in a pendant orientation with a clean integrated finish.
• Good match if: Cable management and aesthetics matter in a customer-facing space - the mount routes cabling internally through the bracket body, avoiding exposed runs on the wall surface.
• You may need a different model if: Your camera model is outside the M32-LVE and P32-V/LV series, the location is outdoors, or the installation requires a ceiling pendant drop rather than a wall-mounted pendant configuration - a different AXIS mounting accessory designed for those conditions will be the appropriate choice.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: Your camera is an AXIS M32-LVE or P32-V/LV and the installation site requires wall mounting with a pendant drop angle to achieve the correct field of view from a vertical surface indoors.
• You may need a different model if: The installation is outdoors or in a partially exposed environment - an AXIS outdoor-rated wall or parapet mount designed to match your camera's IP rating will be the appropriate accessory type for that condition.
• Pairs well with: AXIS M32-LVE or P32-V/LV series dome cameras, PoE network switches for single-cable runs to the camera position, and in-wall back boxes where available to conceal cabling behind the wall surface before it enters the mount.

Common Questions

1. Will the TP3101 work with any AXIS dome camera?

   No. The TP3101 is specifically designed for the AXIS M32-LVE and P32-V/LV camera series only. AXIS produces a range of mounting accessories, each matched to specific camera models or families. Using the TP3101 with a camera outside those two series is not supported and the physical interface will not align correctly. Check the AXIS mounting selector or the datasheet for your specific camera model to confirm the correct accessory.

2. Can this mount be used outdoors?

   No. The TP3101 is rated for indoor use only. It is not weatherproofed and should not be installed in any location subject to rain, condensation, or direct moisture exposure. For outdoor wall-mounted pendant installations with M32-LVE cameras, an outdoor-rated AXIS mounting accessory with the appropriate IP rating for the camera will be required instead.

3. Does the TP3101 support internal cable routing?

   Yes. The mount is designed to route cabling through the bracket body from the wall entry point to the camera head. This keeps the network cable concealed within the mount assembly rather than running externally along the wall surface, which is important for installations in customer-facing or high-visibility areas where exposed cabling is not acceptable.

4. What is the difference between a pendant wall mount and a standard wall mount for dome cameras?

   A standard wall mount attaches the camera directly to the wall surface with the lens angled outward. A pendant wall mount extends the camera away from the wall on a drop arm, holding it in a pendant orientation so the lens points downward - the same angle as a ceiling-mounted dome. This is useful when the camera needs to cover a floor area directly below the mount point rather than a scene at mid-height in front of the wall. The TP3101 achieves this pendant positioning from a wall surface for compatible AXIS M32 and P32 series cameras, as stocked by Security Australia.

5. Does this mount require any special tools or fixings to install?

   No specialist tools are required. The TP3101 mounts to a wall surface using standard fixings appropriate to the wall type - concrete, brick, or plasterboard over stud framing will each require the correct anchor type for the substrate. Standard installer tools are sufficient. Cable should be run to the mount position before the bracket is fixed, as the internal routing path requires the cable to be fed through the mount during assembly.

6. Will this mount work with a P32-LV as well as a P32-V?

   The TP3101 is confirmed compatible with the P32-V/LV series. The P32-LV is a variant within the P32-V/LV family, so compatibility is expected for that model. However, always verify against the AXIS mounting compatibility documentation for your specific camera part number before purchase, as AXIS periodically updates camera variants within a series. The product datasheet and AXIS compatibility tool are the definitive references for confirming the correct mounting accessory for a given camera model.

Downloads & Resources

No downloads available for this product.