AXIS T98A18-VE Media Converter Cabinet 230V – Secure Outdoor Housing for Axis Devices

Model: T98A18-VE

Who This Is For

When outdoor fibre termination and device protection is the priority, the AXIS T98A18-VE Media Converter Cabinet gives installers a purpose-built enclosure that houses Axis media converters and companion devices at the field end of a fibre run. It is designed for 230V mains input, making it suited to installations where a powered outdoor enclosure is required at a pole, wall, or building exterior - without the need for a custom-built weatherproof box. Typical buyers are system integrators running fibre to remote camera positions on large campuses, industrial sites, carparks, or perimeter fences, where the media converter needs protection from weather, dust, and tampering. The cabinet is built specifically for Axis ecosystem devices, so it complements structured Axis deployments where consistency of hardware and warranty coverage matters. If your project involves long fibre runs terminating at an outdoor node, this cabinet addresses the housing, power, and security requirements in one unit.

What This Cabinet Actually Does

Who Buys This Model

• Security Integrators on Campus or Industrial Projects: Running fibre across large sites to remote camera positions and needing a weatherproof, powered field enclosure at each outdoor node to house the media converter.
• Infrastructure and Utilities Installers: Deploying Axis cameras along perimeter fences, at gates, or on outdoor poles where the conversion point between fibre and copper Ethernet must be protected from the elements and physically secured.
• Project Managers Standardising on Axis Hardware: Specifying a single-vendor solution across their surveillance infrastructure, including housings, to maintain warranty coverage and consistent equipment standards site-wide.
• Installers Connecting to Mains Power at the Field End: Where 230V AC is available at or near the camera mounting point and pulling low-voltage cable all the way from the equipment room is impractical or cost-prohibitive.

Honest Assessment

The T98A18-VE does a specific job well: it gives installers a purpose-built, outdoor-rated, mains-powered enclosure for Axis media converters at the field end of a fibre run. It removes the guesswork of fabricating a custom outdoor box and ensures the housed device is protected, powered, and secured in a housing the manufacturer has specifically designed for the task. For large-site Axis deployments involving fibre infrastructure, it is a straightforward specification decision. What it will not do is serve as a general-purpose outdoor enclosure for third-party equipment or non-Axis devices - compatibility is specific to the Axis product range. It is also not a solution for sites running PoE copper end-to-end with no fibre; in that scenario, no field media converter is needed and this cabinet has no role. Available through Security Australia as part of the broader Axis accessories range.

Before You Buy

Quick Fit Check

• Good match if: You are running fibre to an outdoor camera position and need a weatherproof, mains-powered enclosure to house the Axis media converter at the field termination point.
• Good match if: Your project is a standardised Axis deployment and you need a manufacturer-approved outdoor housing that keeps all hardware under a single-vendor warranty and support structure.
• You may need a different model if: Your installation uses all-copper PoE runs with no fibre, or if you need to house third-party media converters - a different enclosure type from the broader accessory range will be more appropriate.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You are deploying Axis media converters at outdoor fibre termination points and need a manufacturer-designed, mains-powered enclosure that provides weather protection and tamper resistance in a single unit.
• You may need a different model if: Your site runs all-copper PoE cabling with no fibre involved, or if you need to house non-Axis equipment - a general-purpose outdoor enclosure from the accessories range will be the more suitable product type.
• Pairs well with: Axis media converters and fibre SFP modules, Axis outdoor cameras at the downstream end of the fibre run, and a structured PoE switch or NVR at the head end of the system.

Common Questions

1. What goes inside the T98A18-VE cabinet?

   The cabinet is designed to house Axis media converters and compatible Axis accessories at an outdoor field location. It provides the physical enclosure, weather protection, and 230V mains power supply for the device installed inside, forming the outdoor termination point of a fibre run feeding one or more downstream cameras.

2. Does this cabinet work with non-Axis media converters?

   No. The T98A18-VE is designed specifically for Axis devices. Physical dimensions, mounting points, and internal connections are built around the Axis product range. Third-party media converters may not fit correctly or connect to the internal power supply, and using non-Axis equipment in this enclosure would fall outside the manufacturer's intended use.

3. Does the T98A18-VE require a licensed electrician for installation?

   Yes. The cabinet operates on 230V AC mains power, which is a declared electrical installation in Australia. Connection to a mains circuit must be completed by a licensed electrician in compliance with AS/NZS 3000 wiring rules. Network and fibre connections within the cabinet can be handled by the security integrator, but the mains connection is a separate trade scope.

4. Will this cabinet protect the media converter in harsh outdoor conditions?

   Yes. The T98A18-VE is rated for outdoor installation and is designed to protect housed electronics from rain and environmental exposure. For sites in particularly harsh conditions such as coastal locations or heavy industrial environments, confirm the ingress protection rating against your specific site requirements before specifying.

5. How does fibre get into the cabinet?

   The cabinet includes cable entry provisions for fibre and data cabling. The fibre run from the head-end equipment room terminates inside the cabinet at the media converter, which then converts the signal to copper Ethernet for the final short run to the nearby camera or device. Confirm cable entry diameter and gland sizing against your conduit and fibre cable specifications during design.

6. Is the T98A18-VE stocked locally in Australia?

   Yes. The T98A18-VE is part of the Axis accessories range stocked by Security Australia. Confirm current stock availability and lead times before finalising your project schedule, particularly for multi-site rollouts where multiple cabinets are required simultaneously.

Downloads & Resources

No downloads available for this product.