Axis T94M01D Outdoor Pendant Kit to suit P32 nd Q35 Series Cameras

Model: T94M01D

Who This Is For

For installers specifying Axis P32 or Q35 series cameras in outdoor locations where a ceiling or soffit mount is not practical, the Axis T94M01D Outdoor Pendant Kit provides a weatherproof pendant arm solution that positions the camera at the correct angle and protects internal cabling from the elements. This kit is typically selected when cameras need to hang from a wall bracket or pole in exposed outdoor environments - carpark columns, building eaves without a flat soffit, or perimeter walls where a direct surface mount would point the lens at the wrong angle. The T94M01D is designed to integrate cleanly with compatible P32 and Q35 series housings, maintaining the finished aesthetic Axis installations are known for while keeping the cable run concealed inside the arm.

What This Accessory Actually Does

Who Buys This Model

• Security Integrators: Installing Axis P32 or Q35 series cameras on outdoor columns, poles, or walls where the only viable mounting point requires a pendant arm rather than a direct soffit or ceiling mount.
• Carpark and Facility Managers: Specifying camera coverage over open-deck carparks or exposed pedestrian walkways where ceiling mounting is not possible and cameras must be suspended from structural beams or wall brackets.
• Commercial Property Installers: Completing Axis system builds and needing the correct manufacturer-matched pendant accessory to maintain housing weatherproofing and warranty compliance on outdoor installations.
• Education and Healthcare Facility Teams: Deploying Axis P32 or Q35 cameras on external building facades or under covered external areas where pendant mounting delivers the right field of view and a tidy cable-managed finish.

Honest Assessment

The T94M01D does one thing well: it gives installers a purpose-built, weatherproof pendant mount that integrates directly with Axis P32 and Q35 series cameras without modification. The internal cable routing is a genuine practical advantage over surface-run conduit solutions, particularly on architecturally finished buildings or sites where exposed cabling is not acceptable. Using the Axis-supplied pendant kit also removes any doubt about housing IP rating continuity at the camera-to-mount interface - something third-party universal arms cannot guarantee. Where this kit has no role is on indoor installations, flat ceiling or soffit mounts, or any camera outside the P32 and Q35 series - for those scenarios a different Axis mount accessory is the right choice. Buyers can confirm compatibility with their specific camera model through Security Australia before ordering, as P32 and Q35 each cover several variants.

Before You Buy

Quick Fit Check

• Good match if: You are installing an Axis P32 or Q35 series camera outdoors on a wall, pole, or column where a pendant orientation is required and internal cable routing is important for a clean, weatherproof result.
• Good match if: You need the manufacturer-matched pendant solution to maintain housing integrity and warranty compliance on an exposed outdoor Axis installation.
• You may need a different model if: Your camera is from an Axis series outside the P32 or Q35 range, or your installation calls for a wall mount, corner mount, or ceiling mount rather than a pendant arm - Axis produces dedicated accessories for each of those configurations.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You are mounting an Axis P32 or Q35 series camera outdoors in a pendant orientation and need the manufacturer-matched kit that maintains housing weatherproofing and conceals cabling through the arm.
• You may need a different model if: Your Axis camera is from a series outside the P32 or Q35 range - Axis produces series-specific pendant and wall mount accessories, and the T94M01D will not mate correctly with other housing types.
• Pairs well with: Axis P32 or Q35 series dome cameras, PoE network switches with sufficient port density for outdoor cable runs, and surface conduit entry boxes where wall penetration needs to be sealed for weatherproofing.

Common Questions

1. Will the T94M01D work with my Axis P3245 or P3265 camera?

   Yes, provided your camera is from the P32 series, the T94M01D is designed to suit P32 series housings. The P3245 and P3265 are both P32 series models. Confirm your specific variant against Axis's accessory compatibility list before ordering, as housing revisions across the P32 range can affect which pendant kits apply.

2. Does this pendant kit suit Q35 series cameras as well as P32 series?

   Yes. The T94M01D is specified by Axis to suit both the P32 and Q35 series. If you are running a mixed installation with cameras from both series, a single accessory SKU covers both, simplifying your parts order.

3. Does the cable route through the inside of the pendant arm?

   Yes. The T94M01D is designed with internal cable routing, meaning the network cable passes through the body of the pendant arm rather than running exposed on the outside. This protects the cable from UV degradation, physical damage, and tampering, and produces a cleaner installation finish on exterior walls and columns.

4. Will using a third-party pendant arm instead of the T94M01D affect my camera's weatherproof rating?

   Potentially yes. The T94M01D is engineered to interface directly with P32 and Q35 series camera housings, maintaining the housing seal at the mount connection point. A third-party arm that does not mate precisely with the Axis housing can compromise the IP rating at the junction, allowing water ingress at the cable entry point. Using the Axis-supplied pendant kit removes that risk and is the approach recommended by Security Australia for outdoor installations on these camera series.

5. Can this pendant kit be installed on a pole or only on a flat wall?

   The T94M01D pendant arm attaches to a surface using its base plate. Installation on a pole typically requires a separate pole mount adapter compatible with the T94M01D base - check Axis's accessory range for the appropriate pole adapter if your installation point is a round column or pole rather than a flat wall surface.

6. Is this pendant kit suitable for indoor use as well as outdoor?

   Yes, it can be used indoors, but it is specifically rated and constructed for outdoor environments. For indoor pendant mounting of P32 or Q35 series cameras, Axis also offers indoor-specific pendant accessories. If your installation is entirely indoors and aesthetics or cost are a factor, confirm with Axis's accessory range whether an indoor pendant variant suits your application better.

Downloads & Resources

No downloads available for this product.