- Sku: AXIS-5507-401
- Vendor: SecurityAustralia
AXIS T94B01P Conduit Back Box to suit M20 & M3x Series Cameras
Why This Model
- ACI compatibility: Native support for the Axis Conduit Interface means it works directly with the full range of ACI adapters, reducing the need for additional brackets or workarounds on conduit runs.
- ½" conduit and M20 pipe support: Accepts standard conduit sizing used widely across Australian commercial and industrial installations, making it straightforward to integrate into existing infrastructure.
- Built-in UNC female threading: Allows standard camera mounts and holders to attach directly, keeping the installation clean and eliminating the need for conversion hardware.
All IP cameras and recording devices (NVR’s/DVR’s) are covered by a 3 year back-to-base manufacturer warranty.
Our warranty is limited to the replacement of faulty items or parts and does not include damage due to incorrect fitting of parts or accessories, or damage due to mishandling the equipment once out of the box. All faults are sent to the manufacturer for inspection and diagnosis before a replacement is sent out.
Read more about the Terms & Conditions here – https://www.securityaustralia.com.au/terms-and-conditions/
*Just spend over $100 to activate Fast Free Shipping!
Despatch Times: Products are despatched on the same day if the order was placed before 11am on any weekday, Monday - Friday. All other orders are processed and despatched within 24 hours or next business day.
Order Confirmation: Once you place an order, you will receive a confirmation email. This indicates that your order has been received in our system and is now being processed for dispatch. If your item is back-ordered or unavailable, we will notify you via email, and if we do not receive a response, we will attempt to contact you by phone as soon as possible. We value your time and strive to be prompt. If your item(s) are available for immediate shipment (within 2 days), we will process the charges and prepare the order for shipping.
Shipping Times: General shipping times for StarTrack, TNT and Allied couriers are between 1-3 working days from despatch. Longer delivery times may be caused by your package being held at your local courier depot that is beyond our control. Please contact us or the local post depot for confirmation.
Tracking Numbers: all tracking numbers will be emailed to you by our warehouse processing team within the day, after your order is despatched to our local courier.
Have a question?
AXIS T94B01P Conduit Back Box to suit M20 & M3x Series Cameras
Model: AXIS T94B01P
Who This Is For
For installers working on conduit-fed CCTV runs where cable entry point protection and clean termination matter, the AXIS T94B01P Conduit Back Box is a purpose-built mounting accessory designed to suit M20 and M3x series Axis network cameras. It accepts 1/2" conduits and M20 pipes, and integrates directly with the Axis Conduit Interface (ACI), so cable management stays flush, protected, and compatible with standard ACI adapters throughout the installation. The built-in UNC female threading means standard camera mounts and holders attach without modification. This back box suits both fixed dome and bullet-style camera deployments in outdoor environments where exposed cable entry is not acceptable - commercial builds, industrial sites, and any install where the conduit run terminates at the camera mount point and cable integrity is a non-negotiable requirement.
What This Accessory Actually Does
Conduit Cable Entry
Accepts 1/2" conduit and M20 pipes directly into the back box housing, allowing the cable run to terminate cleanly at the mount point. This eliminates exposed cabling between the wall or ceiling surface and the camera body - a requirement on most commercial and industrial builds.
Axis Conduit Interface (ACI) Compatibility
Built to integrate with the Axis Conduit Interface system, meaning it works with the full range of ACI adapters. This keeps camera, mount, and conduit entry within a single coordinated Axis accessory ecosystem rather than requiring third-party adapters or custom fabrication.
UNC Female Threading
The built-in UNC female thread allows standard Axis camera mounts and holders to attach directly without adapters. For installers already working with Axis M20 and M3x series cameras, this means no guesswork on thread compatibility at installation time.
Outdoor Cable Protection
The back box provides a protective housing for cabling in outdoor installations, shielding the cable entry point from environmental exposure. This is particularly relevant for external wall and soffit mounts where moisture ingress at the cable termination point is a common long-term failure point.
Who Buys This Model
- Security installers on commercial projects: Where building codes or client specifications require conduit-fed camera runs, the T94B01P provides a clean, compliant termination point that meets the cable management standard without custom fabrication.
- Industrial and warehouse installers: Sites with heavy conduit infrastructure throughout benefit from a back box that accepts M20 pipe directly, keeping the camera mount point consistent with the rest of the building's cable management system.
- Axis M20 and M3x series camera owners retrofitting conduit: Upgrading an existing surface-run installation to conduit requires a compatible back box at the termination point - the T94B01P is specifically designed for these camera series and threads straight on without adapter complications.
- Project specifiers adding ACI-compatible accessories to a system design: The T94B01P slots into the Axis Conduit Interface ecosystem, so it can be specified alongside ACI adapters and mounts as a single coordinated accessory package across multiple camera positions on a project.
Honest Assessment
The T94B01P does one job and does it without compromise: it provides a properly engineered conduit termination point for Axis M20 and M3x series cameras that integrates cleanly with the ACI adapter system. The UNC threading, M20 pipe compatibility, and ACI integration mean an installer working within the Axis accessory ecosystem has nothing to adapt or modify - it fits as intended. For conduit-fed outdoor installations, it removes the exposed cable entry point that is otherwise the weakest link in long-term weather protection. What it will not do is serve as a universal back box for non-Axis cameras or other camera series outside the M20 and M3x range - thread and ACI compatibility is specific. It is also not a substitute for a junction box where in-wall cable termination or additional cable volume is required. Supplied by Security Australia as part of the broader Axis accessory range, it is best purchased alongside the specific camera model and ACI adapter confirmed for the project.
Before You Buy
Compatibility Note: The T94B01P is designed specifically for Axis M20 and M3x series cameras using the Axis Conduit Interface (ACI). Confirm your camera model is within this range before ordering - the UNC threading and ACI integration are not universal across the broader Axis product line. If your installation uses standard EMT or metric conduit, confirm the conduit entry size matches the back box's 1/2" and M20 specifications before committing to the conduit run.
Quick Fit Check
- Good match if: You are installing an Axis M20 or M3x series camera on a conduit-fed cable run and need a compliant, weather-protected termination point that integrates with the Axis ACI adapter system.
- Good match if: Your project specifies M20 pipe or 1/2" conduit throughout and you need the camera mount point to terminate cleanly into a back box with UNC-threaded mount attachment rather than surface-mounting over an exposed hole.
- You may need a different model if: Your camera is outside the Axis M20 or M3x series range - a different Axis back box or a universal conduit back box designed for your specific camera line will be more appropriate.
Key Features & Technical Specifications
Real-World Scenarios
How It Compares
- Choose this if: Your installation uses Axis M20 or M3x series cameras with a conduit-fed cable run and you need a back box that integrates directly with the Axis Conduit Interface (ACI) system without requiring third-party adapters.
- You may need a different model if: Your camera is from a different Axis series or a different brand entirely - a back box designed for that camera line's threading and housing dimensions will be the correct choice rather than adapting the T94B01P to a camera it was not designed for.
- Pairs well with: Axis ACI conduit adapters, compatible Axis surface or pendant mounts, and Cat5e or Cat6 PoE cabling terminated within the back box housing.
Common Questions
-
Which Axis camera models does the T94B01P actually fit?
The T94B01P is designed for Axis M20 series and M3x series cameras. These are the confirmed compatible ranges. If you are unsure whether a specific model within those series is compatible, checking the camera's accessory list in the Axis product documentation will confirm fit before purchase. -
Does this back box work with standard EMT conduit or only M20 metric pipe?
It accepts both 1/2" conduit and M20 pipe. In Australian installations, M20 is the common metric size, and 1/2" covers the standard imperial trade size used in many commercial conduit runs. Confirm your conduit entry size matches one of these two specifications before running the conduit to the mount point. -
Do I need an ACI adapter in addition to this back box?
Yes, in most configurations. The T94B01P integrates with the Axis Conduit Interface (ACI) system, which uses ACI adapters to connect the back box to specific camera mounts and holders. The back box itself provides the conduit entry point and UNC-threaded base - the ACI adapter bridges the connection to the specific mount or holder being used. Check the Axis accessory configurator for the correct ACI adapter for your camera and mount combination. -
Will this back box suit an outdoor installation?
Yes. The T94B01P is designed to provide cable protection in outdoor environments, shielding the cable entry point at the mount from moisture and environmental exposure. It is intended for use as a permanent outdoor mounting accessory, not as a temporary cover. Ensure the conduit run itself is sealed appropriately at all other entry points to maintain the integrity of the cable protection throughout the run. -
Can I attach any standard camera mount to the T94B01P, or only Axis mounts?
The back box uses UNC female threading, which is the thread standard used across Axis camera mounts and holders. Third-party mounts using the same UNC thread specification may attach, but the ACI integration is specific to the Axis Conduit Interface ecosystem. For guaranteed compatibility without field modifications, Axis mounts and ACI adapters are the intended choice. Security Australia stocks compatible Axis mounting accessories that pair directly with this back box. -
Does using this back box affect the camera's IP rating?
The T94B01P provides environmental protection at the cable entry and mount point. The camera's own IP rating is determined by the camera housing and any mount or dome used with it - the back box contributes to overall installation integrity by removing the exposed cable entry point, but the camera's rated IP protection is a function of the camera unit itself. Always refer to the specific camera model's datasheet for its IP rating.
Downloads & Resources
No downloads available for this product.