How do I link an IP intercom door station to an NVR for recording?

To connect your IP intercom door station to a Dahua or Hikvision NVR so that it records video, follow these straightforward steps:

Step-by-Step Instructions

1. Check Equipment Compatibility:

   • Ensure that your IP intercom door station is compatible with the NVR you are using. Consult the specifications and documentation for both devices.

2. Connect the Power Supply:

   • Connect the door station to a power source. If using a PoE (Power over Ethernet) switch, ensure that it is connected to the same network as the NVR.

3. Connect to the Network:

   • Use an Ethernet cable to connect the door station to the PoE switch. Then, connect the PoE switch to your network router or directly to the NVR.

4. Configure the NVR:

   • Log in to the NVR interface using a web browser or a monitor connected to the NVR.
   • Go to Configuration > Camera Management and select the option to add a new device or camera.

5. Add the Intercom to the NVR:

   • Input the IP address of the intercom door station, along with the username and password (default username is often "admin").
   • Save the configuration and allow the NVR to recognize the door station.

6. Set Recording Parameters:

   • Navigate to the settings for recording. Ensure that the door station is set to be recorded in the schedule you prefer (continuous recording or triggered events).

7. Test the Setup:

   • To ensure the setup is correct, test the functionality by activating the door station and checking if the NVR records the event properly. Verify the recordings for quality and accessibility.
     
     

Conclusion

By following these steps, you can successfully connect your IP intercom door station to the NVR, allowing it to record footage effectively.

For more detailed guidance and available resources, refer to the official Dahua User Manual or the Hikvision User Manual.

If you have any further questions or need assistance, feel free to reach out!