What are the steps for setting up Hikvision cameras using an IP address?

to Configure Hikvision Cameras via IP Address

Configuring Hikvision cameras through their IP addresses is a straightforward process. Follow these steps to get started:

1. Log into the NVR’s IP Address:

   • Access the IP address of your NVR using a web browser. If you're unsure of the NVR's IP address, download and use the SADP tool to find it.

2. Navigate to the Configuration Section:

   • In the web interface, go to Configuration > System > Camera. On the right side, you should see links to access the individual cameras connected to your NVR.
     
     
     

3. Enable Virtual Host (if needed):

   • If you do not see the camera links, you may need to enable the Virtual Host feature. To do this, navigate to:
     • Network > Advanced Settings > Other > Check the box to Enable Virtual Host. Once enabled, the camera links should appear.

By following these steps, you should be able to configure your Hikvision cameras via their IP addresses effectively.

If you have any further questions or need assistance, feel free to reach out!