Up People Counting on a Dahua NVR
Configuring the People Counting feature on your Dahua NVR can help monitor foot traffic in various areas. Here’s a step-by-step guide to get you started:
Step-by-Step Instructions
-
Access the NVR’s Interface:
- Log in to your Dahua NVR using a web browser or via a connected monitor. Enter the NVR’s IP address in the browser’s address bar and log in with your credentials.
-
Navigate to Camera Management:
- Once logged in, go to the Configuration tab.
- From the left-hand menu, select Camera Management.
-
Select the Camera:
- Choose the camera that you want to configure for People Counting. Make sure it is a camera model that supports this feature.
-
Access the People Counting Settings:
- Click on the Advanced Settings for the selected camera.
- Look for the People Counting or similar option under the camera settings.
-
Enable People Counting:
- Toggle the People Counting feature to activate it. You may need to configure additional parameters such as direction (in/out), zone settings, and any relevant filters.
-
Set Up Counting Parameters:
- Define the counting zones if applicable. This helps in specifying which area you want to monitor for people counting.
- Adjust any sensitivity or detection criteria to ensure accurate counting.
-
Save the Settings:
- Once you have configured all the necessary parameters, be sure to save your changes.
-
Monitor the Data:
- Return to the main interface and navigate to the data reporting section to view the people counting statistics as the system collects data.
Conclusion
By following these steps, you can successfully set up the People Counting feature on your Dahua NVR, enabling you to effectively analyze foot traffic in specified areas.
If you have any further questions or need additional assistance, please don’t hesitate to reach out!