Your Dahua Camera to the NVR
Integrating your Dahua camera with the NVR can be achieved easily by following these steps:
Step-by-Step Instructions
-
Access the NVR’s Interface:
- Log into your NVR using a directly connected monitor or through the web interface.
-
Navigate to Camera Management:
- Once logged in, go to the Camera Management section, where you can add or manage your cameras.
-
Add Camera:
- The NVR should automatically search for and detect any cameras on the same network. Look for an option that says Add Camera or similar.
-
Enter Camera Credentials:
- If prompted, provide the username and password for the camera. The default username is often “admin,” and the password will be the one you set during the camera’s initial configuration.
-
Manually Add the Camera:
- If the camera does not appear in the auto-detection list, you can add it manually. You will need the camera’s IP address for this step. You can find the IP address using the Dahua Config Tool.
-
Save Your Settings:
- After entering the required information, save your changes. The camera should now be successfully integrated with the NVR.
Conclusion
By following these steps, you can easily add your Dahua camera to the NVR and enhance your surveillance system. For further assistance or more detailed information, refer to the official Dahua User Manual.
If you have any further questions or need additional support, feel free to reach out!