HiLook HA-KIT-IP1 IP Video Intercom Kit

Model: HIlookIPINTERCOM

Who This Is For

When a managed front-door entry point is the priority - whether for a home, small office, or residential unit - the HiLook HA-KIT-IP1 IP Video Intercom Kit delivers a structured, PoE-powered solution without the complexity of analogue wiring. Installers working on properties that already have Cat5e or Cat6 cable runs will find this kit slots in neatly: the door station and indoor monitor both connect back to a PoE switch using standard ethernet, keeping the cable count low and the installation straightforward. Where remote access matters - letting occupants answer the door from a phone or checking who's at the entry while off-site - the kit supports that through a modem connection added to the switch. This is a purpose-built intercom system rather than a camera add-on, making it the right starting point for anyone specifying a clean, dedicated visitor management setup.

What This Kit Actually Does

Who Buys This Model

• Residential Installers: Running structured cabling to a new build or renovation and needing a front-door intercom that works over the same Cat6 infrastructure as the rest of the property network.
• Property Managers: Managing rental properties or small strata lots where remote door answering is a practical requirement - the modem connection allows off-site response without an on-site caretaker.
• Small Office Operators: Controlling visitor entry to a reception area or single-entry office without committing to a large multi-apartment intercom system or complex access control infrastructure.
• Owner-Builders: Specifying a clean, IP-based front-door solution during construction, where PoE cabling to the door and monitor position can be planned into the wall before plastering.

Honest Assessment

The HiLook HA-KIT-IP1 does what a straightforward IP intercom kit should do well: it keeps the wiring architecture simple by running everything over ethernet to a central PoE switch, removes the need for dedicated power at the door, and adds the option of remote communication when connected to a modem. For a single-entry residential or small commercial install, that is a practical and well-structured solution. Where this kit will not stretch is into multi-door or multi-tenant scenarios - properties requiring multiple door stations, floor directories, or integrated card access will need a more capable intercom platform. It is also a kit, not a hybrid surveillance system, so buyers expecting CCTV-quality continuous recording from the door station should look at pairing this with a separate camera. The HA-KIT-IP1 is part of the Security Australia range and suits buyers who want a dedicated, IP-based intercom without overengineering the solution.

Complete Package Contents

• 1 x HiLook DS-KV6113-WPE1 (or equivalent) IP Door Station - outdoor unit with video and audio
• 1 x HiLook DS-KH6320-WTE1 (or equivalent) Indoor Monitor - ethernet-connected, for receiving door calls
• 1 x PoE Switch - powers both door station and monitor over ethernet

Note: Confirm exact included component models with the product listing or by contacting us directly, as kit contents may vary. Ethernet cabling is not included and must be supplied separately.

Before You Buy

Quick Fit Check

• Good match if: You are installing a single-entry intercom at a home or small office and already plan to run Cat5e or Cat6 cable to the door position - the PoE switch powers the door station directly over that cable with no additional wiring required.
• Good match if: The property owner or manager needs to answer the front door remotely - connecting the PoE switch to a modem enables off-site call response without requiring anyone to be physically present at the indoor monitor.
• You may need a different model if: You are specifying entry management for a multi-tenant building, a property with multiple access points, or a site requiring integrated keycard or PIN access - a commercial-grade multi-door IP intercom or access control system would be more appropriate. Browse the full intercom range at securityaustralia.com.au for larger-scale options.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need a single-entry IP intercom with PoE-powered components, clean ethernet wiring, and optional remote access via modem - and you are installing at a residential or small commercial property with one door station position.
• You may need a different model if: The site has multiple entry points, tenant directories, or requires integrated PIN or card access - a multi-door commercial IP intercom system or a combined intercom and access control platform would be more suitable for those scenarios.
• Pairs well with: An outdoor IP bullet or turret camera positioned above or near the door station to provide continuous recording of the entry approach, complementing the intercom's visitor management function.

Common Questions

1. Does this kit work without a modem or internet connection?

   Yes. The door station and indoor monitor communicate locally over the PoE switch, so the intercom functions fully on a local network without any internet connection. The modem connection is only required if you want to answer the door remotely from outside the property. For a basic in-home or in-office intercom, no modem is needed.

2. What cable do I need to buy separately?

   You will need ethernet cable - Cat5e as a minimum, Cat6 recommended - for 3 runs: door station to PoE switch, indoor monitor to PoE switch, and PoE switch to modem if remote access is required. Ethernet cable is not included in the kit and must be purchased separately. Standard RJ45 terminations apply throughout.

3. Will this kit work for a property with 2 entry doors?

   No, not as supplied. The HA-KIT-IP1 includes 1 door station, making it a single-entry solution. If you need 2 or more door stations feeding into monitors or a combined system, you will need to look at a multi-door IP intercom platform. Contact Security Australia to discuss options that suit a multi-entry layout.

4. Does the door station need a separate power point installed at the door?

   No. The door station is powered by PoE - Power over Ethernet - directly through the ethernet cable connected to the PoE switch. No 240V power point is required at the door location. This is one of the main practical advantages of an IP intercom kit over older analogue systems that required mains power at the door.

5. Can I use my existing network switch instead of the included PoE switch?

   Only if your existing switch supports PoE on the relevant ports. Both the door station and indoor monitor require PoE to operate, so a standard non-PoE switch will not power them. If your existing infrastructure includes a PoE-capable switch with spare ports, it may be compatible - but confirm PoE wattage per port against the door station and monitor requirements before substituting.

6. Does this intercom kit record footage continuously like a CCTV camera?

   No. This is a dedicated visitor intercom system, not a continuous recording surveillance camera. It handles two-way video and audio communication between the door station and monitor. If continuous recording of the entry area is required, a separate IP camera connected to an NVR should be installed alongside this kit to cover that function.

Cabling Considerations

• Cable Type: Cat5e minimum for all runs; Cat6 strongly recommended, particularly for runs approaching 80-100 metres or where the cable passes near electrical conduit.
• Max Cable Run: 100 metres per ethernet segment - door station to switch, monitor to switch, and switch to modem each count as individual segments with their own 100-metre limit.
• PoE Notes: Both the door station and indoor monitor are PoE-powered. The included PoE switch provides power over the ethernet cable - no 240V outlet is required at either device location. Confirm port wattage on the switch matches device requirements before substituting third-party switches.
• Wiring Tips: Run all cables before mounting hardware. Where the cable exits the wall at the door station, use a weatherproof cable entry gland or conduit to prevent water ingress at the penetration point. Keep ethernet cable at least 50mm clear of 240V mains cable runs to avoid interference, and use separate conduit where both run in parallel over long distances.

Product Video Samples

Downloads & Resources

No downloads available for this product.