HiLook Hikvision 8MP 4K 4CH CCTV Kit with 2 Full-Color Audio Cameras IPC-T289

Model: 2CamKit T289

Who This Is For

For property owners who need full-colour night visibility and on-camera audio without building out a large multi-camera system, this 2-camera HiLook 4K kit delivers a ready-to-run setup designed around the IPC-T289 turret camera. It suits residential installations covering a front entry and driveway, small retail premises monitoring a counter and rear exit, or a home office setup where two defined coverage zones cover the full perimeter. The 4-channel NVR gives room to add 2 more cameras later without replacing the recorder. Full-colour imaging means usable footage after dark without relying on IR monochrome, and the integrated audio on each camera means voices and ambient sound are captured alongside video. Everything ships as a matched system - cameras, NVR, and cabling accessories - so there are no compatibility guesses at the point of install.

What This System Actually Does

Who Buys This Model

• Homeowners covering a front entry and driveway: 2 cameras is often the correct count for these two zones, and the full-colour imaging means after-dark activity at the door or near a parked vehicle is recorded in colour rather than IR grey.
• Small retail operators: A shop with a front counter and a rear stockroom or exit suits a 2-camera layout. The audio recording on each IPC-T289 adds verbal context to customer or staff interactions captured on video.
• Installers doing a starter residential job with expansion in mind: The 4-channel NVR means a conversation with the client about adding 2 more cameras later is straightforward - the recorder is already capable without an upgrade.
• Property managers on short timelines: A matched HiLook kit removes the compatibility research step. Cameras, NVR, and power delivery are already designed to work together.

Honest Assessment

This kit does two things well: it delivers genuine 4K resolution from turret cameras that produce colour footage at night, and it packages that into a system where the NVR and cameras are matched and PoE-ready. For a 1-2 zone residential install or a compact commercial space, that combination removes most of the guesswork around camera selection and recorder compatibility. The audio recording adds practical value for incident review without requiring separate microphone hardware. Where this kit reaches its natural limit is coverage count - 2 cameras suit defined, limited zones. Sites needing 4, 6, or 8 coverage points will be better served by a larger kit, which is available through Security Australia in higher camera counts. This kit also does not include a pre-installed hard drive, so storage needs to be factored into the total install cost.

Complete Package Contents

• 2 x HiLook IPC-T289 - 8MP 4K full-colour audio turret camera
• 1 x HiLook 4-channel PoE NVR - 4K recording, 2 spare PoE ports

Before You Buy

Quick Fit Check

• Good match if: You need to cover 2 specific zones - such as a front door and driveway - and colour footage after dark is a priority, since the IPC-T289 produces full-colour night images without IR switching.
• Good match if: You want to install now and expand later, as the 4-channel NVR accommodates 2 additional cameras without replacing the recorder.
• You may need a different model if: Your site has more than 2 coverage zones to monitor - a 4-camera or 8-camera kit will be a more cost-effective starting point than adding cameras individually to this 2-camera bundle.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need exactly 2 zones covered with 4K full-colour night imaging and audio, and you want room to add cameras later without replacing the NVR.
• You may need a different model if: Your site has 4 or more coverage points to address from day one - a 4-camera or larger kit will deliver better value per camera and avoid the cost of adding cameras individually to this starter bundle.
• Pairs well with: A surveillance-grade 3.5-inch HDD for the NVR, and a PoE-compatible network switch if you plan to expand beyond 4 cameras in future.

Common Questions

1. Does this kit include a hard drive?

   No. The NVR in this kit does not include a pre-installed hard drive. You will need to purchase a compatible 3.5-inch surveillance-grade HDD separately. For 4K recording across 2 cameras, a 2TB drive is a reasonable starting point, providing roughly 7-10 days of continuous footage depending on motion frequency and compression settings. Higher-capacity drives extend retention accordingly.

2. Will this kit record in colour at night, or does it switch to black and white?

   Yes, colour is maintained at night. The IPC-T289 is a full-colour camera, which means it uses its sensor and supplemental light to produce colour footage in low-light conditions rather than switching to IR monochrome. This preserves colour detail - clothing, vehicle colour, skin tone - that standard IR-only cameras cannot capture after dark.

3. Do both cameras record audio?

   Yes. Both IPC-T289 cameras in this kit include a built-in microphone, and the NVR records audio alongside video for each channel. Note that audio surveillance laws vary by state in Australia - check applicable legislation regarding consent and signage requirements before enabling audio recording at your site.

4. Can I add more cameras to this system later?

   Yes, up to 4 cameras total. The NVR has 4 PoE channels and this kit activates 2 of them, leaving 2 spare ports for expansion. Additional HiLook cameras compatible with the NVR can be added at any point without replacing or upgrading the recorder.

5. What cabling does this system use between the cameras and NVR?

   Cat5e or Cat6 Ethernet cable. The NVR delivers both power and video data over a single Cat cable to each camera via PoE, so no separate power supply or coax run is needed at the camera end. Standard maximum PoE cable runs apply - keep individual camera runs under 100 metres for reliable performance.

6. Does this kit work with Hikvision cameras, or only HiLook?

   HiLook is the confirmed compatible ecosystem for this kit. HiLook is a brand produced by Hikvision, and HiLook NVRs are designed for plug-and-play operation with HiLook cameras. While some Hikvision cameras may connect, compatibility is not guaranteed across all models and firmware versions - sticking with matched HiLook hardware is the reliable approach. The Security Australia range includes higher-tier Hikvision kits if you need Hikvision-native AI features such as AcuSense.

7. Can I view this system remotely on my phone?

   Yes. HiLook NVRs support remote viewing via the Hik-Connect app on iOS and Android. Remote access requires the NVR to be connected to your network via its Ethernet port and set up through the app. Live view, playback, and motion alert notifications are accessible remotely once configured.

Cabling Considerations

• Cable Type: Cat5e minimum, Cat6 recommended for 4K bandwidth and future-proofing.
• Max Cable Run: 100 metres per camera from NVR PoE port to camera. Runs beyond this risk power and data instability - use a PoE extender if longer distances are required.
• PoE Notes: Both cameras are powered directly by the NVR's built-in PoE switch. No separate injector or power adapter is needed at the camera end.
• Wiring Tips: Route cabling internally where possible to avoid UV degradation on outdoor runs. If cabling must run externally, use UV-rated Cat6 with appropriate conduit at exposed sections to protect the jacket over time.

Downloads & Resources

No downloads available for this product.