Hikvision DS-2CD7A26G0/P-IZS 2MP ANPR Bullet Camera 50M IR LED, IP67, PoE, 2.8-12mm

Model: DS-2CD7A26G0/P-IZS 2.8-12mm

Who This Is For

For security installers and facility managers who need verified, accurate licence plate capture at entry points, driveways, car parks, and gated access lanes across Australian sites. The Hikvision DS-2CD7A26G0/P-IZS is purpose-built for ANPR deployment - not a general-purpose camera repurposed for plate reading. Its deep learning AI engine has been specifically optimised for Australian number plate formats, delivering 95% or better recognition accuracy across all states and territories. The 2.8-12mm motorised varifocal lens lets installers dial in the exact focal length to suit lane width and capture distance without physically swapping lenses. DarkFighter and LightFighter technology handle the two conditions that defeat standard cameras at entry points: headlight glare on dark approaches and strong backlight during daytime. IP67 weatherproofing and IK10 vandal resistance make this suitable for unprotected outdoor mounting exposed to both weather and physical interference.

What This Camera Actually Does

Who Buys This Model

• Commercial property managers: Monitoring gated car parks and tenant access lanes where a log of every entering and exiting vehicle is required for tenancy management or incident investigation.
• Industrial and logistics site operators: Loading dock and yard entry control where vehicle rego verification is part of a contractor or delivery approval workflow integrated with an access control system.
• Security integrators: Specifying ANPR for residential estate boom gates or body corporate car parks where Australian plate format accuracy and reliability under varying light conditions are non-negotiable requirements.
• Petrol and convenience retail operators: Forecourt plate capture for drive-off detection and incident recording, where the camera must handle direct headlight glare and fast-changing day-to-night light conditions reliably.
• Local government and infrastructure teams: Controlled parking zones or restricted facility access where plate data feeds directly into permit verification or enforcement workflows.

Honest Assessment

The DS-2CD7A26G0/P-IZS does the core job of ANPR properly - 95%+ plate recognition accuracy optimised for Australian plate formats is a confirmed and meaningful specification, not a marketing claim. DarkFighter and LightFighter address the two most common failure modes in ANPR deployments: low-light unreadability and headlight washout. The motorised varifocal lens makes installation practical across different lane widths without a fixed focal-length commitment. IK10 and IP67 ratings mean the housing survives both weather and physical interference at exposed entry points. What this camera will not do is cover wide-area multi-lane scenarios or long free-flow vehicle approaches at highway speeds - for those applications, a longer focal length ANPR camera or multi-sensor setup would be more suitable. It is also a dedicated ANPR device, so buyers who only need general perimeter surveillance without plate capture should look at standard bullet or turret options available through Security Australia.

Before You Buy

Quick Fit Check

• Good match if: You are covering a single controlled entry or exit lane at a car park, estate gate, or industrial site where approaching vehicles travel at low speed and you need verified Australian plate logging.
• Good match if: The installation environment involves challenging lighting - dawn and dusk sun angles, nighttime headlight glare, or poorly lit undercroft car parks - where DarkFighter and 140dB WDR are needed to maintain plate legibility.
• You may need a different model if: You need to capture plates across 2 or more lanes simultaneously, or at high vehicle speeds on an open road approach - a longer focal length ANPR camera with a wider ANPR-optimised range would be more appropriate for those scenarios.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need a purpose-built ANPR camera with confirmed 95%+ Australian plate accuracy, motorised varifocal flexibility, and combined DarkFighter plus 140dB WDR for single-lane controlled entry points with challenging lighting.
• You may need a different model if: Your site requires multi-lane simultaneous plate capture, long free-flow approach distances, or a wider ANPR capture range - an 8-32mm ANPR variant or a multi-sensor ANPR system would better suit those requirements.
• Pairs well with: A Hikvision ANPR-compatible NVR or VMS platform that can receive and process structured plate event data, plus an alarm output device or boom gate controller connected via the camera's built-in alarm I/O.

Common Questions

1. Does this camera work with all Australian state and territory number plate formats?

   Yes. The ANPR algorithm in the DS-2CD7A26G0/P-IZS has been specifically optimised for Australian number plate formats across all states and territories, with a confirmed recognition accuracy of 95% or better. This is a factory-level software optimisation, not a configurable setting - the camera ships ready for Australian deployment without requiring custom plate templates to be loaded.

2. Will this camera read plates accurately at night without additional lighting?

   Yes, within its design parameters. The EXIR 2.0 infrared illuminator provides up to 50m of IR coverage, and DarkFighter technology maintains usable imaging in very low ambient light before IR activates. For ANPR purposes, IR illumination at night is standard practice - the camera is designed to produce plate-legible frames under IR. If your capture distance exceeds 50m in darkness, supplementary IR lighting may be required.

3. What is the maximum vehicle speed this camera can capture plates from accurately?

   The DS-2CD7A26G0/P-IZS is designed for controlled entry point deployment - boom gates, car park entries, and access lanes - where vehicles are travelling at low speed (typically under 30km/h) or stopping. It is not rated or marketed for free-flow high-speed capture on open roads or highways. For applications involving vehicles at higher speeds or free-flow traffic, a higher-specification ANPR camera with a faster shutter and longer focal length is more appropriate. The 2.8-12mm varifocal range is suited to close-approach, low-speed lane configurations.

4. What mounting angle is required for reliable ANPR accuracy?

   Mounting geometry matters significantly for ANPR performance. Hikvision recommends a horizontal offset angle of no more than 30 degrees from the vehicle's direction of travel, and a vertical tilt angle of no more than 15 degrees. Exceeding these angles introduces plate distortion that degrades recognition accuracy. The motorised varifocal lens allows focal length to be set remotely after mounting, but the physical mount position must still respect these angle constraints for the 95%+ accuracy figure to apply.

5. Does the camera output structured plate data or just video?

   Both. As part of the Hikvision DeepInView range, the DS-2CD7A26G0/P-IZS outputs structured ANPR event data - including the recognised plate string, timestamp, and event image - alongside the standard video stream. This structured data can be consumed by compatible Hikvision NVRs, iVMS-4200 software, or third-party VMS platforms via the camera's API. This is what enables integration with access control triggers, gate controllers, and centralised plate databases. Check with Security Australia that your VMS or NVR version supports the camera's structured ANPR event output.

6. Can this camera trigger a gate or alarm output when a plate is recognised?

   Yes. The camera includes built-in alarm I/O, which allows it to directly trigger an external relay, gate controller, or alarm panel output based on ANPR events. A recognised or unrecognised plate can be mapped to an alarm output trigger. This removes the need for a separate controller in simple single-gate deployments, though more complex integrations will still require a VMS or access control platform to manage the plate whitelist logic centrally.

7. How many pixels across a number plate does this camera capture at different focal lengths?

   Pixel density across the plate (pixels per metre, or PPM) depends on the focal length setting and the camera-to-plate distance. At the 12mm end of the varifocal range, the camera produces a narrower field of view and higher pixel density per plate at distance, while the 2.8mm end provides a wider view but fewer pixels per plate at equivalent distances. For reliable ANPR, Hikvision recommends a minimum of 130 pixels across the width of a standard Australian plate at the capture point. During commissioning, use the motorised zoom to verify this pixel density is achieved at your intended capture distance before finalising the mount position.

Product Video Samples

Downloads & Resources

No downloads available for this product.