Hikvision HIK-190215552 Clear dome cover for DS-2CD5585G0-IZS cameras

Model: HIK-190215552

Who This Is For

Property managers specifying replacements for existing dome camera installations will find this a straightforward solution. The HIK-190215552 is a genuine Hikvision clear dome cover designed specifically as a replacement or spare part for the DS-2CD5585G0-IZS varifocal network dome camera. When an installed dome cover becomes scratched, cracked, or fogged from UV exposure or accidental impact, image quality degrades regardless of how capable the sensor behind it is. Rather than replacing the entire camera, this cover allows the housing to be restored to original condition. It is the clear variant, meaning it does not add any tint that could reduce light transmission in lower-light conditions. This part suits installers carrying spares on service runs, facility managers maintaining multi-camera sites, and anyone who needs to restore a DS-2CD5585G0-IZS to full working order without purchasing a new unit. Note that lead time for this item is 6-8 weeks.

What This Actually Does

Who Buys This Model

• Security Installers on Service Contracts: Technicians servicing multi-site installations carrying spare dome covers to resolve degraded image quality on the spot without a return visit.
• Facility Managers at Commercial Sites: Those managing buildings with DS-2CD5585G0-IZS cameras already in place who need to maintain system performance without full camera replacement after physical damage or extended UV exposure.
• End-Users After Impact Damage: Owners of installed DS-2CD5585G0-IZS units where the dome has been cracked or scratched by vandalism, cleaning equipment, or accidental contact.
• Procurement Teams Holding Spares Stock: Large-site operators or councils running standardised Hikvision camera fleets who maintain spare parts inventory to minimise downtime on critical camera positions.

Honest Assessment

The HIK-190215552 does one thing and does it correctly - it is a genuine OEM clear dome cover that fits the DS-2CD5585G0-IZS housing without modification. For any site where that specific camera is already installed and the cover has deteriorated, this is the right part. The clear optic is appropriate for installations where low-light performance is a priority, as a tinted alternative would reduce effective IR range. It will not suit any other camera model, and it will not resolve image issues caused by sensor degradation, lens faults, or firmware problems - those are separate concerns. This part is supplied by Security Australia with a stated lead time of 6-8 weeks, so it is not suitable for emergency same-day replacement situations. If the camera body itself has been damaged beyond the dome cover, a full unit replacement is the practical path forward rather than sourcing individual housing components.

Before You Buy

Quick Fit Check

• Good match if: You have a DS-2CD5585G0-IZS with a damaged or degraded dome cover and want to restore image quality without replacing the full camera unit.
• Good match if: You are an installer or facility manager holding spare parts for a standardised Hikvision fleet and want an OEM clear cover on hand for rapid field replacement.
• You may need a different model if: Your installed camera is a different Hikvision model - dome covers are not interchangeable across housings, and the correct part number for your specific camera model should be sourced separately.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You have a confirmed DS-2CD5585G0-IZS installation where the dome cover is the only component requiring replacement and you want a genuine OEM clear part.
• You may need a different model if: Your camera is a different Hikvision model - dome covers are not cross-compatible across housing types, and ordering the wrong cover will result in a fitment failure. Check your camera's label and identify the correct replacement part number for that specific model.
• Pairs well with: A DS-2CD5585G0-IZS varifocal dome camera unit for complete installation or spares planning.

Common Questions

1. Will this dome cover fit any other Hikvision camera models?

   No. The HIK-190215552 is dimensioned specifically for the DS-2CD5585G0-IZS housing. Hikvision dome covers are not interchangeable between models - even cameras within the same series may use different housing dimensions. Fitting an incorrect cover risks misalignment, loss of the environmental seal, and a compromised IP or IK rating. Always verify the installed camera model before ordering.

2. Does this cover affect the camera's night-vision or IR performance?

   No, not negatively - and the clear finish actively avoids any reduction in IR transmission. A tinted dome cover absorbs a portion of the infrared light emitted by the camera's illuminators, which reduces effective night-vision range. This clear variant passes IR light without the optical penalty that a smoked or tinted cover introduces.

3. How long is the lead time and is this part available from stock?

   The confirmed lead time is 6-8 weeks. This part is not available for same-day or next-day dispatch. If you have an urgent requirement for a camera position that is currently unserviceable, plan an interim coverage solution for that zone while the part is in transit. The team at Security Australia can confirm current stock status at time of enquiry.

4. Does replacing the dome cover require any tools or specialist equipment?

   No specialist equipment is required for a standard dome cover swap on a Hikvision housing. The process typically involves removing the outer cover retaining ring or clips, lifting the old dome cover clear, seating the new cover, and refastening the retaining mechanism. A flat-head tool may be needed depending on the specific housing design. If the camera is installed at height, standard access equipment applies.

5. Will changing the dome cover affect the camera's IP or IK rating?

   Only if the cover is not seated correctly. A genuine OEM replacement cover like this one is designed to mate precisely with the DS-2CD5585G0-IZS housing, maintaining the original environmental seal when correctly fitted. A third-party or incorrect-fit cover may leave gaps that compromise the housing's rated ingress protection. Using the correct OEM part and confirming the cover is fully seated before reinstallation is the way to maintain the camera's original ratings.

6. Is there a smoked or tinted version of this dome cover available?

   The HIK-190215552 is confirmed as the clear variant. Whether a tinted version exists for this specific housing is not confirmed in available product data. If a smoked dome cover is required for your installation - for example, to obscure the camera's viewing direction in a retail environment - that would need to be verified as a separate part number with Hikvision directly or through your supplier.

Downloads & Resources

No downloads available for this product.