Hikvision DS-1297ZJ Pendant Mount CCTV Camera Bracket ** Special order **

Model: DS-1297ZJ

Who This Is For

For installers and integrators who need to suspend a DS-2CD29xx series dome camera from a ceiling where a standard flush or surface mount is not suitable. The Hikvision DS-1297ZJ is an extendable pendant mount bracket designed specifically to drop a compatible camera down from an exposed ceiling, structural beam, or high soffit - creating the correct field of view angle in spaces where a direct ceiling fix would aim the lens too steeply or leave the camera obscured. Typical applications include warehouse ceilings with high clearance, atriums, covered walkways, and retail environments with raked or corrugated rooflines. This is a special-order item, so it suits projects where the installation geometry has already been scoped and the DS-2CD29xx camera model has been confirmed as the selected unit.

What This Bracket Actually Does

Who Buys This Model

• CCTV Installers on Commercial Fit-outs: Specifying DS-2CD29xx cameras into warehouses, showrooms, or covered loading areas where ceilings are too high for a standard surface mount to produce a usable image angle.
• Integrators Managing Existing Hikvision Systems: Adding cameras to an existing DS-2CD29xx deployment in a new zone or building and needing a bracket that matches the series already on site.
• Project Managers on Special-Order Builds: Procuring non-stock mounting hardware for a scoped project where the camera model, ceiling height, and bracket type have been confirmed during the design phase.
• Facilities Teams Upgrading Coverage: Replacing an improvised or third-party pendant mount with a manufacturer-matched bracket to restore correct alignment and cable management on an existing DS-2CD29xx installation.

Honest Assessment

The DS-1297ZJ does one thing well: it gives DS-2CD29xx series cameras a clean, adjustable pendant mount that is purpose-matched to those models. The extendable arm addresses the most common site problem with high ceilings - the inability to achieve a useful field of view from a flat-ceiling position. Internal cable routing keeps the installation tidy, which matters on commercial sites with strict finish requirements. What this bracket will not do is fit cameras outside the DS-2CD29xx series. It is not a universal pendant mount, and attempting to adapt it to other dome or turret cameras risks misalignment and voided support. Because it is a special-order item available through Security Australia, lead times need to be confirmed before scheduling installation. If the project requires a general-purpose pendant arm for mixed camera models, a different bracket category is worth reviewing first.

Before You Buy

Quick Fit Check

• Good match if: You are mounting a DS-2CD29xx series camera on a ceiling too high for a standard surface mount to produce a useful viewing angle, and you need an adjustable drop with concealed cabling.
• Good match if: You are working on a special-order commercial project where the camera model has been pre-specified and you need a manufacturer-matched bracket to complete the installation correctly.
• You may need a different model if: Your project uses a mix of camera models from different series - a universal pendant mount bracket category will give you more flexibility across the installation without compatibility concerns.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: Your camera is from the DS-2CD29xx series and the ceiling height or structure makes a flat surface mount impractical - the extendable arm and series-matched interface make this the correct choice for that combination.
• You may need a different model if: Your installation uses cameras from multiple Hikvision series or from other brands - a universal pendant mount bracket category will handle mixed deployments without compatibility restrictions.
• Pairs well with: DS-2CD29xx series dome cameras, PoE network switches with sufficient port reach for the ceiling drop distance, and conduit or trunking where cable routing above the ceiling is exposed.

Common Questions

1. Will this bracket fit my Hikvision dome camera?

   Only if your camera is from the DS-2CD29xx series. The DS-1297ZJ is designed specifically for that series and the mounting interface is not confirmed as compatible with other Hikvision dome or turret lines. Check your camera's model number - if it begins with DS-2CD29, this bracket is the correct match. If your model number differs, a universal pendant bracket category is the safer option.

2. Does this bracket route the cable internally?

   Yes. Pendant mount brackets of this type are designed to conceal the network cable inside the arm from the ceiling entry point down to the camera body. This keeps the installation clean on commercial sites where exposed cabling is not acceptable. Confirm the cable entry point at the ceiling junction suits your conduit or ceiling void arrangement before finalising the install plan.

3. How long does it take to get one? It shows as special order.

   Lead times vary and are not fixed. Because the DS-1297ZJ is a special-order item stocked by Security Australia, you should contact the team to confirm current lead time before committing to an installation date. Do not assume it will arrive within standard shipping windows - on active project sites, ordering ahead by several weeks is the safer approach.

4. Will this bracket work on a steel purlin or concrete ceiling?

   Yes, provided the fixing hardware suits the substrate. The bracket itself mounts to the ceiling surface, but the fixings you use - concrete anchors for a slab, purlin clamps or tek screws for steel - are site-specific. The bracket places a concentrated load at a single point, so the substrate and fixing method need to be rated for the combined weight of the bracket and camera before installation proceeds.

5. Does the extendable arm lock at a fixed length once set?

   Yes. Extendable pendant arms of this design are adjusted during installation and then secured at the chosen drop length. Once set, the arm holds the camera at that position. The adjustment is made at install time - this is not a mechanism intended for ongoing repositioning once the camera is live and cabled.

6. Do I need any additional mounting hardware with this bracket?

   You will need suitable ceiling fixings matched to your substrate - these are not included as universal fixings cannot be pre-specified for every ceiling type. Depending on your cable run, you may also need a junction box or back-box at the ceiling entry point to protect the cable termination above the bracket. Review the installation requirements for your specific site before ordering.

Downloads & Resources

No downloads available for this product.