Hikvision DS-TL2002CI IR LED Continuous Supplement Light with 28 Lamp Beads & Aluminium Alloy Housing

Model: DS-TL2002CI

Who This Is For

Property managers specifying supplemental lighting for existing camera installations where night-time image quality has fallen short will find the Hikvision DS-TL2002CI a practical addition to the setup. This is a continuous IR LED supplement light built around 28 individual lamp beads housed in a durable aluminium alloy body - designed to push additional infrared illumination into areas where a camera's built-in IR simply doesn't reach far enough, or where coverage has degraded over time. It suits installers working on car parks, loading areas, long corridor approaches, perimeter fencing, and any outdoor zone where ambient light drops too low for consistent camera performance after dark. The aluminium alloy housing manages heat from the LED array and holds up in outdoor conditions without the thermal stress that plastic housings suffer under sustained operation.

What This Product Actually Does

Who Buys This Model

• CCTV Installers Retrofitting Existing Sites: Where cameras are already mounted but the client reports poor night footage, adding a DS-TL2002CI avoids the cost and disruption of replacing cameras entirely.
• Warehouse and Loading Dock Operators: Long internal approaches and large open bays often exceed a camera's built-in IR range. A dedicated supplement light fills the distance gap without repositioning cameras.
• Car Park and Perimeter Managers: Outdoor zones with no ambient lighting after hours benefit directly from a continuous IR source that gives cameras consistent infrared fill across the full monitored area.
• Integrators Specifying Hikvision Systems: The DS-TL2002CI fits within the Hikvision accessory ecosystem, giving integrators a brand-matched supplement light to specify alongside Hikvision camera deployments.

Honest Assessment

The DS-TL2002CI does one job well: it adds consistent, continuous infrared illumination to camera positions that need it. The 28-bead array and aluminium housing are practical choices for a unit that runs continuously - the thermal management is built into the design rather than treated as an afterthought. For installers who have committed to a camera position and discovered the built-in IR falls short at night, this is a straightforward fix that avoids a full reinstall. Where it will not help is in situations where the camera itself is the limiting factor - if the sensor or lens is underspecified for low-light performance, adding IR output alone will not compensate. It also does not produce white light, so it will not deter intruders visually the way a colour light deterrent would. Buyers who need active deterrence alongside illumination should look at full-colour floodlight cameras available through Security Australia.

Before You Buy

Quick Fit Check

• Good match if: Your camera position is confirmed and the night footage shows insufficient IR reach - the DS-TL2002CI adds dedicated IR output without requiring camera relocation or replacement.
• Good match if: The installation is outdoors with sustained operation expected - the aluminium alloy housing handles heat dissipation and outdoor conditions better than plastic-bodied supplement lights.
• You may need a different model if: Active visual deterrence is part of the brief - a full-colour floodlight camera or separate white-light strobe unit is better suited to sites where visibility to the intruder matters as much as camera image quality.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need a continuous, always-on IR supplement for an existing camera that lacks sufficient built-in infrared range - the 28-bead array and aluminium housing make it practical for sustained outdoor use.
• You may need a different model if: Your site requires visible white-light deterrence rather than invisible IR illumination - a full-colour floodlight camera or dedicated white-light strobe accessory is a better fit for active deterrence applications.
• Pairs well with: Fixed bullet or turret cameras with limited built-in IR range, particularly on long-approach outdoor positions where the camera's own IR runs out before the end of the monitored zone.

Common Questions

1. Will the DS-TL2002CI work with any camera brand, or only Hikvision cameras?

   It works with any camera that uses an infrared-sensitive image sensor. The DS-TL2002CI is a standalone light source - it does not communicate electronically with the camera, so brand compatibility is not a factor. Any camera that produces black-and-white footage at night using IR will benefit from the additional infrared fill, regardless of manufacturer.

2. Is the IR output from this light visible to people in the monitored area?

   No. Infrared light sits outside the visible spectrum, so people in the monitored area cannot see it. The DS-TL2002CI illuminates the scene for the camera only - this is not a deterrence light. If visibility to potential intruders is part of the security requirement, a white-light supplement or floodlight camera is more appropriate.

3. Does the aluminium alloy housing make a practical difference compared to plastic-bodied IR lights?

   Yes, particularly for continuous-run applications. LED arrays generate heat during operation, and aluminium conducts heat away from the components far more efficiently than plastic. For an IR light running continuously through long overnight periods, this thermal management directly affects how long the LED beads maintain their output level over the product's lifespan.

4. Will this work for outdoor installation in Australian conditions?

   Yes, the aluminium alloy housing handles outdoor temperature variation and sustained operation. Confirm the unit's IP weatherproofing rating against the specific exposure conditions of the install location - particularly for sites with direct rain exposure or coastal salt air - by checking the full datasheet available through Security Australia before purchasing.

5. Does using 28 lamp beads rather than fewer beads meaningfully improve the result?

   Yes, for even illumination across a scene. A higher bead count distributes the same total output across more emission points, which reduces the central hotspot effect common with single-emitter or low-bead IR lights. The result is a more uniform light level from the centre to the edges of the camera's field of view, which makes footage easier to review and analyse.

6. Does this light trigger automatically when it gets dark, or does it run continuously?

   The DS-TL2002CI is specified as a continuous supplement light, meaning it outputs IR without requiring a trigger signal from the camera. If automatic day/night switching is needed, a photocell or timer controller would need to be added externally - this is not a built-in feature confirmed in the product specification.

Downloads & Resources

No downloads available for this product.