Hikvision DS-PS1-B AX Hybrid Series, Wired External Siren Sounder, IP54, 105DB

Model: DS-PS1-B

Who This Is For

When completing a Hikvision AX Hybrid alarm system and an audible external deterrent is the final piece of the install, the DS-PS1-B is the wired sounder designed for that role. Alarm installers specifying residential or light commercial sites will recognise the value here - a dedicated AX Hybrid series sounder that wires directly into the panel without workarounds or compatibility questions. At 105 dB measured at 30 cm, it produces enough output to be heard across a property boundary or through a building facade, giving any triggered event an immediate audible presence. The IP54 rating and -20 degrees C to +60 degrees C operating range make it a practical fit for exposed eave or fascia mounting across most Australian climate zones, including high-heat environments where cheaper sounders can degrade over time.

What This Sounder Actually Does

Who Buys This Model

• Alarm Installers Completing AX Hybrid Deployments: Technicians finishing a Hikvision AX Hybrid panel installation who need a manufacturer-matched sounder that wires in cleanly without compatibility testing or improvised wiring.
• Residential Security Integrators: Installers specifying an audible external deterrent for houses and townhouses where 105 dB output will carry across neighbouring properties and the IP54 rating suits standard eave mounting.
• Light Commercial Alarm Contractors: Contractors fitting alarm systems on small retail premises, offices, or light industrial units where an external sounder is required to meet insurance or tenancy obligations.
• Property Managers Replacing Failed Sounders: Facilities managers or property managers maintaining existing Hikvision AX Hybrid installations who need a direct like-for-like replacement that does not require reprogramming the panel.

Honest Assessment

The DS-PS1-B does its primary job well - it delivers a high-output audible alarm at 105 dB, connects directly into the Hikvision AX Hybrid system, and is built to a standard that suits outdoor Australian conditions. The wired connection eliminates battery dependency and the interference risks that affect wireless sounders, which matters in commercial environments with high RF traffic. The IP54 rating and PC+ABS construction are appropriate for typical eave or wall mounting, and the operating temperature range covers the majority of Australian installation scenarios without supplementary protection. Where this sounder has limits: IP54 is not suitable for fully exposed positions with direct water spray or coastal salt air over the long term - installations in those conditions should consider additional housing. This unit is also specific to the Hikvision AX Hybrid ecosystem and is not a general-purpose sounder for other panel brands. Available through Security Australia, the DS-PS1-B is best specified as part of a complete AX Hybrid system build rather than a standalone accessory.

Before You Buy

Quick Fit Check

• Good match if: You are installing or expanding a Hikvision AX Hybrid alarm system and need a wired external sounder that connects directly to the panel without additional relay wiring or compatibility workarounds.
• Good match if: The installation site is a standard residential or light commercial exterior position - under eaves, on a boundary wall, or on a fascia - where IP54 protection and a -20 to +60 degree C operating range will cover local weather conditions.
• You may need a different model if: Your site uses a non-Hikvision AX Hybrid panel, or requires a sounder with a higher IP rating for fully exposed coastal or industrial environments - a heavy-duty outdoor siren with IP65 or above protection would be more appropriate in those cases.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You are building or maintaining a Hikvision AX Hybrid alarm system and want a wired sounder that is designed specifically for that panel platform, with a confirmed 105 dB output and IP54 outdoor protection.
• You may need a different model if: Your installation requires a higher IP rating for fully exposed coastal or industrial conditions, or if your panel is not a Hikvision AX Hybrid - a general-purpose sounder with IP65 protection and universal wiring terminals would be more appropriate for those scenarios.
• Pairs well with: Hikvision AX Hybrid series alarm control panels, AX Hybrid wired PIR detectors, and AX Hybrid door and window contact sensors as part of a complete wired alarm system.

Common Questions

1. Will the DS-PS1-B work with any Hikvision alarm panel, or only the AX Hybrid series?

   It is designed for Hikvision AX Hybrid series panels specifically. The DS-PS1-B is listed as part of the AX Hybrid accessory range, and compatibility with other Hikvision panel families such as older AX Pro wireless panels or different wired panel ranges is not confirmed in available specification data. Before ordering for a non-AX Hybrid panel installation, verify compatibility against the panel's peripheral documentation.

2. How loud is 105 dB in practice - will it be heard outside the property?

   Yes, at typical residential and light commercial distances. 105 dB measured at 30 cm is a high-output level - at 10 metres that reduces to approximately 75 dB, which remains clearly audible in most outdoor environments and across a standard residential boundary. It is loud enough to function as an active deterrent and alert nearby residents, not just occupants inside the protected premises.

3. What does IP54 mean for this sounder's outdoor installation suitability?

   IP54 means the housing is rated for dust protection (partial - sufficient to prevent harmful ingress) and water splashing from any direction. It is appropriate for standard sheltered outdoor positions - under eaves, on a wall with overhang cover, or on a fascia where direct rain is deflected. It is not rated for positions where the sounder would face direct water pressure, hosing down, or prolonged heavy rain exposure without overhead protection.

4. Does this sounder require its own power supply, or does it draw power from the AX Hybrid panel?

   It draws power directly from the panel's auxiliary output. The DS-PS1-B operates on 8 to 16 VDC with a maximum current draw of 0.22A and a quiescent power consumption of 0.96W. No separate power supply or transformer is required, but you should confirm the AX Hybrid panel's total auxiliary current budget accounts for all connected wired peripherals before finalising the design.

5. Does the DS-PS1-B have a battery backup in case mains power is lost?

   No internal battery is specified for this sounder. The DS-PS1-B is a wired device that relies on power supplied through its connection to the AX Hybrid panel. Battery backup during a mains failure depends on the panel's own backup battery capacity. If backup sounder operation during power outages is a specific requirement, confirm the AX Hybrid panel's battery runtime under load includes the sounder's draw.

6. Will this sounder work in extreme Australian summer heat?

   Yes, within its confirmed rating. The DS-PS1-B is rated to operate up to +60 degrees C, which covers surface temperatures on north-facing external walls in most Australian climate zones during summer. The PC + ABS housing is specified to handle these conditions without structural degradation under normal installation circumstances. For sites where direct sun exposure pushes wall surface temperatures above 60 degrees C, a shaded mounting position or heat shield should be considered. The DS-PS1-B is part of the Security Australia range and suits the majority of Australian residential and commercial installations without additional thermal management.

Downloads & Resources

No downloads available for this product.