Hikvision DS-KD-DIS Gen2 Intercom, Door Station Name Scroll Module

Model: DS-KD-DIS

Who This Is For

When naming clarity at the entry point is the priority, the Hikvision DS-KD-DIS Gen2 Door Station Name Scroll Module fills a specific gap in multi-tenant intercom installations. Designed exclusively for use with the Hikvision DS-KD modular door station system, this module adds a scrolling name display to the entry panel - allowing visitors to browse resident or tenant names and locate the correct call button without confusion. It is a practical addition for apartment buildings, serviced offices, and aged care facilities where a long list of occupants would otherwise require visitors to memorise unit numbers. Integrators building out modular DS-KD door station configurations will recognise this as the display component that bridges the gap between a functional entry panel and one that residents and visitors can actually navigate with confidence. It operates on 12 VDC with a low power draw under 3W.

What This Module Actually Does

Who Buys This Module

• Residential apartment integrators: Specifying DS-KD modular door stations for mid- to high-density residential buildings where visitors need to search for a specific resident name rather than know a unit number in advance.
• Commercial property installers: Adding clear occupant navigation to serviced office buildings, co-working spaces, or professional suites with multiple tenants sharing a single entry point.
• Aged care and supported accommodation facilities: Entry panels at facilities where staff, families, and delivery personnel need to identify specific residents without relying on unit number knowledge.
• Facilities managers upgrading existing DS-KD installations: Retrofitting a name scroll display into an already-deployed modular door station frame to improve visitor experience without replacing the entire panel.

Honest Assessment

The DS-KD-DIS does one thing - it adds a scrollable name display to a DS-KD modular door station - and it does that function well for the buildings where it belongs. The IP65 rating and -20 to 60 degree operating range mean it holds up in exposed outdoor entry positions across Australian conditions. The sub-3W draw is genuinely modest and keeps power budgeting straightforward in multi-module builds. What this module will not do is function as a standalone device or operate outside the DS-KD modular ecosystem. It has no independent network connection, no display without the associated door station system, and no value outside a confirmed DS-KD installation. If your project uses a different intercom platform entirely, this component has no application. Available through Security Australia, it is a purpose-specific add-on best specified at the design stage rather than retrofitted as an afterthought.

Before You Buy

Quick Fit Check

• Good match if: You are building or expanding a Hikvision DS-KD Gen2 modular door station installation for a multi-tenant building and need visitors to scroll through resident names at the entry panel.
• Good match if: The door station is in an exposed outdoor location - the IP65 rating and wide operating temperature range (-20 to 60 degrees Celsius) confirm it will hold up in Australian exterior environments.
• You may need a different model if: Your project uses a non-DS-KD intercom platform - this module has no compatibility outside the Hikvision DS-KD modular system, and a different intercom brand's door station components will be required instead.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You are specifying a Hikvision DS-KD Gen2 modular door station for a multi-occupant building and need visitors to navigate resident names at the entry panel rather than relying on unit number knowledge.
• You may need a different model if: Your intercom installation uses a non-modular or non-Hikvision platform - a standalone touchscreen door station with built-in directory functionality may be more appropriate for that system type.
• Pairs well with: DS-KD modular door station call button modules, camera modules, and card reader modules within the same Hikvision DS-KD frame configuration.

Common Questions

1. Will this module work with any Hikvision intercom, or only the DS-KD modular system?

   Only the DS-KD modular door station system. The DS-KD-DIS is a module slot component and is not compatible with Hikvision's non-modular intercom products. Before ordering, confirm your door station is part of the DS-KD Gen2 modular line and that your frame has an available slot for this module.

2. How are resident names added to the scrolling display?

   Names are configured through the DS-KD intercom management software, not on the module itself. The DS-KD-DIS has 64 MB of onboard storage for directory data, but all name entry and updates are handled at the software or platform level by the system administrator. Physical access to the module is not required for name changes after initial installation.

3. Does this module require a separate power supply?

   No, not necessarily as a separate unit. The DS-KD-DIS operates on 12 VDC and draws less than 3 W. It draws power from the door station system's shared 12 VDC supply. However, you should confirm that the total power budget of your door station build - across all modules in the frame - is within the capacity of the installed power supply before adding this module.

4. Is the DS-KD-DIS suitable for outdoor installation in Australian conditions?

   Yes. The module is rated IP65, confirming dust-tight protection and resistance to direct water jets. The operating temperature range of -20 to 60 degrees Celsius covers both the high ambient temperatures experienced at exposed outdoor entry points in Australian summers and cold-climate installations in southern states.

5. How many name scroll modules do I need for one door station?

   This depends on your specific DS-KD frame configuration and column layout. The DS-KD modular system uses a frame-based design where modules fill defined slots. The number of DS-KD-DIS modules required will be determined by the number of name display columns in your door station design. Review the DS-KD frame specification for your build - the datasheet linked in the Downloads section below provides additional reference. Security Australia can assist with configuration queries if your module count is unclear.

6. Can this module be added to an existing DS-KD door station that is already installed?

   Yes, provided an available module slot exists in the current frame. The modular DS-KD architecture is designed to allow components to be added or swapped without replacing the full door station assembly. Confirm that your existing frame has an unoccupied slot of the correct type before purchasing this module as a retrofit addition.

Cabling Considerations

• Power Cable: 12 VDC supply cabling to the door station frame - cable sizing should account for the total load of all modules installed in the frame, not only this module in isolation.
• Module Interconnect: The DS-KD-DIS connects internally within the DS-KD modular frame - no separate data cable run is required for this module once the frame is wired.
• PoE Notes: This module is not PoE powered. It operates on 12 VDC from the door station system's dedicated power supply, not from a PoE switch.
• Wiring Tips: Route all power cabling to the door station frame before module installation. The low power draw of under 3 W means this module has minimal impact on total frame power consumption, but the combined draw of all modules in the frame must remain within the supply unit's rated output.

Downloads & Resources

• DS-KD-DIS Datasheet (PDF)