Hikvision DS-7608NI-M2/8P 8ch PoE CCTV NVR, 128Mbps 8 PnP ports, 4K, 2 HDD Bay + 4TB Hard Drive

Model: DS-7608NI-M2/8P-4TB

Who This Is For

For installers and system integrators who need a capable 8-channel PoE NVR that can handle modern high-resolution cameras without running separate power infrastructure to each camera. The DS-7608NI-M2/8P is built around 8 built-in PoE ports, 128Mbps incoming bandwidth, and dual HDD bays - making it a practical fit for small commercial sites, small-to-medium offices, retail premises, and residential builds where a clean rack or cabinet installation is expected. Supplied with a 4TB hard drive already installed, this bundle removes the guesswork around storage sizing for most standard 8-camera deployments. The 4K output capability means footage is reviewed on a monitor at full resolution, and the M series build positions it a step above entry-level Hikvision recorders for buyers who want room to grow without replacing the NVR.

What This NVR Actually Does

Who Buys This Model

• Electrical and security contractors: Installers managing small commercial fitouts who want a single-cable run to each camera using the built-in PoE ports, keeping the cabinet tidy and avoiding the cost of a separate PoE switch.
• Retail and hospitality operators: Business owners running 4-8 cameras across a store, cafe, or venue who want a recorder that arrives with storage already fitted and can be handed over to staff without additional setup.
• Small office and commercial tenancy fit-outs: Facilities managers or building owners specifying an 8-camera system where footage needs to be reviewed locally at full resolution on a dedicated monitor using the 4K HDMI output.
• Residential premium installs: Custom builders or integrators specifying a higher-grade recorder for a home where the camera count sits at 8 and the client wants headroom for adding a second HDD as camera bitrates or retention requirements grow.

Honest Assessment

The DS-7608NI-M2/8P handles what most 8-camera commercial or premium residential installs actually need - 128Mbps bandwidth comfortably supports 8 channels of high-resolution recording, the onboard PoE ports remove the need for a separate switch, and the dual-bay design gives a clear upgrade path when more storage is needed. The 4K HDMI output is genuinely useful for on-site review, not just a specification number. The included 4TB drive means the unit is ready to record from day one when purchased through Security Australia in this bundle configuration. Where it has limits: this is an 8-channel unit only - if the site is likely to grow beyond 8 cameras, a 16-channel recorder is the more appropriate platform. It also does not support RAID configurations, so if redundant storage is a client requirement, a different product category is worth considering.

Complete Package Contents

• 1 x DS-7608NI-M2/8P - 8-channel PoE NVR, 128Mbps, dual HDD bay, 4K HDMI output
• 1 x 4TB Surveillance Hard Drive - pre-installed, surveillance-rated HDD

Before You Buy

Quick Fit Check

• Good match if: You are installing up to 8 Hikvision IP cameras and want a single cable run per camera using the built-in PoE ports without a separate switch in the cabinet.
• Good match if: The site uses or plans to use AcuSense cameras and the client needs event-based filtering to reduce false alarm notifications from motion triggers.
• You may need a different model if: The camera count is expected to grow beyond 8, or the site requires RAID storage redundancy - a 16-channel NVR or a higher-tier recorder with RAID support would be more suitable options to explore on securityaustralia.com.au.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need an 8-channel recorder with all PoE ports built in, 128Mbps bandwidth for high-resolution cameras, and a second HDD bay for future storage growth - without adding a separate PoE switch.
• You may need a different model if: The site is likely to exceed 8 cameras in the near future or requires more than 2 HDD bays - a 16-channel NVR with more storage capacity would be the appropriate next step to review on securityaustralia.com.au.
• Pairs well with: Hikvision AcuSense dome, turret, or bullet cameras to take advantage of the NVR's human and vehicle detection filtering capabilities.

Common Questions

1. Does this NVR work with non-Hikvision IP cameras?

   Yes, with limitations. The DS-7608NI-M2/8P supports ONVIF-compatible third-party cameras, but plug-and-play auto-detection and AcuSense event filtering only function with compatible Hikvision cameras. Third-party cameras will need to be added manually by IP address and will record standard motion events rather than human/vehicle-classified alerts.

2. Will this NVR record all 8 cameras simultaneously at full resolution?

   Yes. The 128Mbps incoming bandwidth is sufficient to handle 8 channels recording simultaneously at high bitrates. Running 8 cameras at 8MP with H.265+ compression typically sits well within the available bandwidth, so simultaneous full-resolution recording across all channels is a normal operating condition for this unit.

3. How long will the included 4TB hard drive store footage?

   It depends on camera count, resolution, and recording schedule. As a practical guide, 8 cameras recording continuously at 1080p with H.265+ compression typically achieves around 20-30 days of footage on 4TB. Running fewer channels, using motion-triggered recording, or enabling H.265+ on 4K cameras will all extend retention. Using an online storage calculator with your specific camera settings will give you the most accurate estimate.

4. Does the AcuSense filtering require specific cameras, or does the NVR handle it independently?

   AcuSense filtering requires compatible Hikvision AcuSense cameras - the NVR alone cannot classify humans and vehicles from a standard camera feed. The classification is performed at the camera level, and the NVR receives and acts on those pre-classified events. When the correct cameras are connected, event search and push notifications can be filtered to humans or vehicles only directly within the NVR interface and Hik-Connect app.

5. Can I access this NVR remotely without setting up port forwarding?

   Yes. The DS-7608NI-M2/8P supports Hik-Connect cloud-based remote access, which allows live view, playback, and event notifications through the Hik-Connect mobile app without requiring port forwarding or a static IP address. A standard NBN or broadband connection with the NVR connected via its Gigabit network port is sufficient for remote access.

6. What is the maximum capacity of the second hard drive bay?

   Hikvision specifies support for high-capacity surveillance-grade HDDs in this series - drives up to 10TB per bay are commonly used in M series NVRs, giving a potential total of over 14TB when combining the included 4TB with a second drive. Confirm the specific maximum supported drive size in the official Hikvision datasheet before purchasing a large-capacity second drive. This model is stocked by Security Australia with the first bay pre-fitted with a 4TB surveillance drive.

7. Does this NVR support audio recording?

   Yes, when cameras with built-in microphones are connected. The NVR supports audio recording on channels where the connected camera provides an audio stream. Audio cannot be recorded through the NVR itself as it has no standalone microphone input - the audio source must come from the camera. Check that any camera you intend to use for audio has a confirmed built-in microphone in its own specification sheet.

Downloads & Resources

No downloads available for this product.