Hikvision DS-2DF8C435MHS-DELW 4MP 35X DarkFighterX PTZ Camera, Dual-Sensor, IR 300m, IP67 IK10

Model: DS-2DF8C435MHS-DELW

Who This Is For

When long-range identification across a wide, open site is the priority, a standard fixed camera simply cannot cover the distances involved. The Hikvision DS-2DF8C435MHS-DELW is built for large-scale outdoor deployments where operators need a single camera position to cover expansive approaches - think perimeter fencing at industrial parks, port entry zones, mining sites, and large logistics facilities. The dual-sensor design means the wide-angle channel keeps a persistent overview of the full scene while the 35x optical zoom channel homes in on specific targets for identification, and the DarkFighterX technology pulls usable colour detail from near-darkness. With 300m IR range, IK10 vandal resistance, and IP67 weatherproofing, this unit is specified for exposed installations where both the environment and the threat level are serious. Security integrators and facility managers dealing with after-hours intrusion detection across large land areas are the primary buyers.

What This Camera Actually Does

Who Buys This Model

• Industrial Facility Security Managers: Specifying a single high-capability PTZ to cover a long perimeter fence line or loading dock approach where a fixed camera array would require many more positions and cable runs.
• Mining and Resources Site Operators: Requiring IK10-rated hardware that can withstand both environmental punishment and deliberate tampering at remote, unmanned gate entry points operating overnight without reliable ambient lighting.
• Port and Logistics Terminal Integrators: Deploying PTZ units on high poles to monitor vehicle movements across large paved areas where the dual-sensor overview-and-zoom architecture allows one operator to watch the broad picture and interrogate specific activity simultaneously.
• Critical Infrastructure Security Integrators: Designing monitored perimeter systems where after-hours colour identification at range - enabled by DarkFighterX - is a baseline project requirement rather than a nice-to-have.

Honest Assessment

The DS-2DF8C435MHS-DELW genuinely earns its place at the upper end of the PTZ market. The combination of 35x optical zoom, DarkFighterX dual-sensor low-light processing, and 300m IR reach makes it one of the more capable tools available for long-range outdoor identification in difficult lighting. The IK10 and IP67 ratings mean it can be installed in genuinely harsh locations without housing compromise being a concern. Where it will not serve well is in applications that require wide-area continuous coverage without an operator actively managing pan and tilt - a multi-sensor panoramic camera or a fixed wide-angle unit would be more appropriate for unattended overview recording across a broad field. This is a monitored-operations camera, not a set-and-forget installation. It is also a higher-complexity product to commission correctly; integrators unfamiliar with PTZ preset and auto-tracking configuration should factor setup time accordingly. Available through Security Australia, this model is suited to professional installation environments.

Before You Buy

Quick Fit Check

• Good match if: You need a single camera position to cover a long-range outdoor approach - such as a 200m+ driveway or access road - where the 35x optical zoom and 300m IR allow identification of vehicles or persons at a distance no fixed camera can match from the same pole.
• Good match if: Your installation is on an exposed industrial or mining site where IK10 impact resistance and IP67 weatherproofing are written into the specification and the housing needs to physically withstand attempted tampering.
• You may need a different model if: Your primary requirement is passive wide-area recording across a broad scene with no operator actively controlling the camera - a multi-sensor panoramic camera covering 180 or 360 degrees would provide continuous full-scene coverage that a PTZ cannot replicate when not actively patrolling.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: Your site requires long-range identification capability at 100m+ in low or zero ambient light, and an operator or VMS-based auto-tracking will actively manage the camera's pan and tilt to follow activity.
• You may need a different model if: Your primary goal is passive, unattended wide-area recording where the camera is not actively controlled - a multi-sensor panoramic camera permanently covering a broad fixed field of view would serve that use case more reliably than a PTZ left to patrol autonomously.
• Pairs well with: A high-channel PoE+ NVR with PTZ protocol support, paired with fixed wide-angle cameras on adjacent positions to provide continuous scene context that the PTZ supplements with zoomed detail.

Common Questions

1. Does this camera work on standard PoE switches?

   No. The DS-2DF8C435MHS-DELW requires PoE+ (IEEE 802.3at, up to 30W) rather than standard PoE (IEEE 802.3bt, 51 W). The power draw of the pan/tilt motors, 300m IR illuminator array, and built-in heater combined exceeds what 802.3bt can supply. Check that your switch has 802.3at-capable ports with sufficient per-port wattage before installing, or plan for a local 24V AC power supply at the camera end.

2. What is the difference between DarkFighterX and a standard colour camera?

   DarkFighterX uses 2 physical sensors simultaneously - one optimised for colour, one for monochrome low-light sensitivity - and fuses the data from both. A standard colour camera degrades to a noisy, desaturated image in near-darkness, or switches to monochrome IR mode. DarkFighterX maintains colour rendering at light levels well below what a single-sensor camera can handle, producing footage that retains clothing colour, vehicle colour, and skin tone detail at ranges and light levels where a standard camera would show only a grey shape.

3. What pan and tilt range does this PTZ cover, and does it auto-flip?

   The camera covers 360° continuous pan with no mechanical stop, and -15° to 90° tilt with auto-flip. The 360° continuous pan means patrol routes have no dead zones caused by cable wind-up limits. The auto-flip function automatically inverts the image when the tilt axis passes through the nadir point, so tracking a subject walking directly beneath the camera remains smooth and correctly oriented without operator intervention.

4. Will this camera work with non-Hikvision NVRs or VMS platforms?

   Yes, with limitations. The DS-2DF8C435MHS-DELW supports ONVIF, which allows basic video streaming integration with third-party NVRs and VMS platforms. However, PTZ-specific functions - preset positions, patrol routes, auto-tracking, and IR sensitivity control - typically require either Hikvision's own NVR/VMS software or a third-party platform with a specific Hikvision PTZ driver. Confirm your VMS has a verified Hikvision PTZ integration before specifying this camera in a mixed-brand system.

5. Does this camera support auto-tracking, and how does it behave when a target leaves the frame?

   Yes. The DS-2DF8C435MHS-DELW supports auto-tracking, which uses on-board processing to detect and follow a moving target by adjusting pan, tilt, and zoom automatically. When a tracked target exits the frame or is lost, the camera returns to its configured home position or resumes a pre-programmed patrol route depending on how it has been set up in the connected NVR or VMS. Configuring auto-tracking sensitivity and return behaviour correctly at commissioning is important to avoid false triggers from foliage movement or lighting changes in outdoor environments. This model is stocked by Security Australia for professional integration projects.

6. What does the dual-sensor design mean for storage and recording?

   Two streams are produced simultaneously - one from the wide-angle overview sensor and one from the tele zoom sensor. Both streams can be recorded concurrently, which roughly doubles the storage consumption compared to a single-stream PTZ. Plan your NVR storage and channel count accordingly: you will need 2 recording channels per camera and sufficient HDD capacity for dual-stream recording at your chosen resolution and frame rate settings.

7. Is the IK10 rating on the dome globe only, or does it cover the full housing?

   The IK10 rating applies to the camera assembly as a unit, covering the dome globe and its surrounding housing structure. IK10 is the highest rating under IEC 62262, indicating resistance to 20 joules of impact energy - equivalent to a 5kg object dropped from 400mm. This is relevant for industrial and perimeter installations where physical interference is a realistic threat, but it does not make the camera indestructible; anchor bolts, conduit entries, and bracket welds should be specified and installed to an equivalent standard to prevent displacement rather than glass breakage being the failure point.

Downloads & Resources

No downloads available for this product.