Hikvision DS-2CD4B45G0-IZS 4MP 12x Outdoor 4.7-65.8mm Varifocal PoE Network Bullet Camera

Model: DS-2CD4B45G0-IZS

Who This Is For

When covering long perimeters, extended driveways, or wide-open yards is the priority, a fixed focal length simply will not reach. The Hikvision DS-2CD4B45G0-IZS is built for installers working on sites where the camera needs to cover distance and flex - think industrial yards, commercial car parks, rural properties, warehouse loading areas, and any approach where subjects are 30 to 100 metres from the mounting point. The 4.7-65.8mm motorised varifocal lens gives a true 12x optical zoom range with auto focus, so the installer can set precise coverage from the NVR without climbing a ladder. Pair that with 120-metre Smart IR, Hikvision's DarkFighter low-light sensor, and 120dB WDR, and this camera handles the variable lighting and long-range identification demands that catch standard outdoor cameras off guard. It powers via PoE+ (802.3at) or 12VDC, keeping cabling straightforward on most commercial PoE switch setups.

What This Camera Actually Does

Who Buys This Model

• Industrial Site Security Managers: Facilities with long fence lines, loading docks, and unlit perimeters where a single well-placed camera needs to zoom in on a specific gate or entry point up to 120 metres away without installing multiple fixed cameras across the run.
• Rural and Semi-Rural Property Owners: Acreage with long driveways or paddock access points where the 4.7-65.8mm range lets the camera cover a wide entrance view by day and narrow in on a vehicle or person at distance using 120-metre IR at night.
• Commercial Car Park Operators: Multi-level or open car parks with high-contrast lighting conditions where 120dB WDR handles bright overhead lights mixed with deep shadows, and VCA line crossing raises an alert on restricted zone entry.
• Security Integrators on Commercial Fit-Outs: Installers running PoE+ infrastructure who need a high-specification long-range camera that can be zoomed and focused remotely via the NVR after mounting, minimising return visits for lens adjustment.

Honest Assessment

The DS-2CD4B45G0-IZS earns its place on sites where distance and lighting variability are the two primary challenges. The 12x motorised varifocal genuinely reduces on-site tuning time, and the DarkFighter sensor's 0.007 Lux colour performance is among the stronger low-light specifications available through Security Australia at this resolution tier. The combination of 120-metre Smart IR and 120dB WDR addresses the two scenarios that cause the most footage failures: total darkness at range, and blown-out high-contrast frames at entrances. On-board VCA means the camera generates meaningful alerts without leaning entirely on the NVR's processing load. Where this camera is not the right call: if you need continuous 360-degree or wide-area coverage across multiple zones from a single mounting point, a PTZ or multi-sensor panoramic camera will serve better. This is a single-direction long-range tool - it does that job well, but it does not pan or self-track without a separate PTZ unit.

Before You Buy

Quick Fit Check

• Good match if: Your site has a long access road, driveway, or perimeter fence line where subjects need to be identified at 40-100 metres and a fixed focal camera cannot reach - the 12x motorised varifocal and 120-metre Smart IR are built for this scenario.
• Good match if: Your installation runs PoE+ infrastructure and you need on-camera VCA analytics (line crossing or intrusion) to reduce NVR processing load and generate direct alerts without a separate analytics server.
• You may need a different model if: Your primary requirement is wide-area coverage across multiple directions from a single mount point - a PTZ camera with auto-tracking or a multi-sensor panoramic camera will cover more ground with fewer camera positions.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need a single camera to cover a long, narrow approach at variable distances - the 12x motorised varifocal and 120-metre Smart IR combination handles that job without multiple fixed-lens cameras on the same run.
• You may need a different model if: Your coverage requirement involves tracking moving subjects across a wide area or rotating between multiple zones - a PTZ camera with auto-tracking will serve that use case more effectively than a fixed-mount bullet.
• Pairs well with: A PoE+ NVR with VCA event management to receive and action the on-camera line crossing and intrusion alerts, reducing false-alarm fatigue compared to basic motion detection recording.

Common Questions

1. Will this camera work with a standard PoE switch?

   No - not reliably. The DS-2CD4B45G0-IZS requires PoE+ (IEEE 802.3at, Class 4), which supplies up to 30W. Standard 802.3af PoE switches are limited to 15.4W per port and will either fail to power the camera or cause unstable operation when the motorised lens and IR draw simultaneously. Confirm your switch or injector is 802.3at rated before installation.

2. Does this camera support remote zoom and focus adjustment?

   Yes. The motorised varifocal lens supports remote adjustment via the camera's web interface or a compatible NVR, including one-click auto focus after zoom changes. This is a significant practical advantage during commissioning on elevated mounts - the installer sets the zoom and triggers auto focus from ground level without a second person or return visit for fine-tuning.

3. How does the 120-metre IR range interact with the zoom setting?

   The 120-metre IR spec applies at the telephoto end of the zoom range. When the lens is set wide (closer to 4.7mm), the IR illuminators cover a broader angle but the effective reach is shorter. Smart IR automatically adjusts infrared output intensity based on detected subject distance, so objects that move close to the camera at any zoom setting are not overexposed by the IR flood. Set the zoom to its intended operating position, then verify IR performance at the actual subject distance before finalising the install.

4. Will this camera work for identifying faces or number plates at long range?

   It depends on zoom setting and subject distance. At 4MP (2560 x 1440) and the telephoto end of the lens, the camera can capture sufficient pixel density for face and plate identification at range - but the specific identification distance depends on how tightly the lens is zoomed and the subject's approach angle. The DS-2CD4B45G0-IZS supports face detection as a VCA trigger, but it is not a purpose-built ANPR camera. For guaranteed number plate capture at speed across multiple lanes, a dedicated ANPR camera is the appropriate product. The Security Australia range includes purpose-built ANPR options for those requirements.

5. Does the camera record locally without an NVR?

   Yes. The camera has an on-board microSD/SDHC/SDXC card slot supporting up to 128GB, allowing local edge recording independent of a network recorder. This functions as standalone recording or as redundant backup storage alongside an NVR. The VCA analytics (line crossing and intrusion) can trigger local recording events directly to the card.

6. Is this camera suitable for outdoor installation in harsh Australian conditions?

   Yes. The IP67 rating confirms full dust ingress protection and resistance to water immersion up to 1 metre for 30 minutes, which covers driving rain, hose wash-down splash, and sustained wet weather. The Defog feature in the image processing pipeline also assists with visibility in smoky or foggy conditions common to rural and coastal sites. The housing is a standard outdoor bullet form designed for permanent external mounting.

Downloads & Resources

No downloads available for this product.