Hikvision DS-220AZJ-145-BA Black Wall Mount Bracket – Heavy-Duty CCTV Camera Mount for Dome & Turret Cameras

Model: DS-220AZJ-145-BA

Who This Is For

Property managers specifying mounting hardware for dome and turret cameras on rendered masonry, brick, or textured external walls will recognise the problem this bracket solves. A camera without the right mount sits at the wrong angle, moves under vibration, and looks unfinished. The Hikvision DS-220AZJ-145-BA is a heavy-duty wall mount bracket in black, designed to give dome and turret cameras a stable, correctly positioned base on vertical surfaces where a flush ceiling or eave mount is not practical. Installers running Hikvision turret cameras on external walls - shopfronts, fence lines, carpark columns, or building corners - use this bracket to bring the camera face forward and angle it down toward the coverage zone without improvising with incompatible third-party hardware.

What This Bracket Actually Does

Who Buys This Model

• Security installers: Specifying camera mounting hardware for Hikvision dome and turret installs on external brick or rendered walls where a direct eave mount is not structurally available.
• Commercial property managers: Sourcing a replacement bracket for an existing camera that has shifted, rusted, or where the original mount was never fit for purpose on a vertical surface.
• Small business owners managing their own install: Mounting a Hikvision turret camera on a shopfront wall or roller door column and needing a bracket that delivers consistent camera angle without requiring custom fabrication.
• Site managers on construction or industrial sites: Using the black finish and heavy-duty build to mount cameras on site huts, fencing, or painted steel structures where a durable, weather-exposed mount is required.

Honest Assessment

The DS-220AZJ-145-BA does one job: it gives dome and turret cameras a reliable mounting point on vertical surfaces using a heavy-duty bracket in black from Hikvision's own accessory range. Using manufacturer-matched hardware removes the guesswork around cable entry alignment and mounting footprint compatibility that generic brackets introduce. The black finish suits darker building surfaces where colour-matching the install matters. What this bracket will not do is solve camera selection, angle calculation, or cable routing - those decisions need to be made before the bracket ships. It is also not a pole mount, corner mount, or ceiling rose, so if your surface is not a flat vertical wall, a different mount type is the right call. The DS-220AZJ-145-BA is available through Security Australia as part of the Hikvision accessories range alongside compatible dome and turret cameras.

Before You Buy

Quick Fit Check

• Good match if: You are mounting a Hikvision dome or turret camera on a flat vertical wall surface and need a manufacturer-matched bracket with a black finish to suit the camera colour and building facade.
• Good match if: You are replacing a failed or incompatible third-party bracket and want a heavy-duty mount that will hold camera position without drift in an outdoor environment.
• You may need a different model if: Your install requires a corner mount, pole mount, or ceiling pendant - those mounting scenarios call for a different bracket type rather than a standard wall mount.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You are mounting a Hikvision dome or turret camera on a flat vertical wall, need a black finish to match the camera or building surface, and want manufacturer-matched hardware that aligns with Hikvision camera footprints.
• You may need a different model if: Your installation requires a pole mount, corner mount, or pendant ceiling drop - each of those mounting scenarios requires a bracket type designed for that specific configuration rather than a flat wall mount.
• Pairs well with: Hikvision dome and turret cameras in the same black finish, particularly those installed on external rendered or masonry walls at entry points, driveways, or carpark areas.

Common Questions

1. Will this bracket fit any Hikvision dome or turret camera?

   Not necessarily every model - compatibility depends on the specific camera's mounting footprint and base diameter. The DS-220AZJ-145-BA is designed for dome and turret cameras within the Hikvision range, but Hikvision produces cameras across multiple form factor generations. Check your camera model's compatible bracket list before ordering to confirm the mounting footprint and cable entry alignment match.

2. Can this bracket be used outdoors?

   Yes. The heavy-duty construction is suited to outdoor wall mounting in exposed conditions. The bracket itself is built to hold camera position under wind load and general outdoor exposure. That said, the weatherproofing of the installation is determined primarily by the camera's own IP rating - the bracket is a mount, not an enclosure.

3. Does this bracket work on rendered or masonry walls?

   Yes. A flat rendered or masonry wall is the primary surface this bracket is designed for. You will need to select fasteners appropriate for the substrate - masonry anchors for brick or concrete, and appropriate fixings for rendered Hebel or lightweight block. The bracket provides the mounting platform; the anchor points into the wall determine the overall holding strength.

4. Is the black finish coated or painted, and will it fade outdoors?

   The DS-220AZJ-145-BA carries a black finish consistent with Hikvision's accessory range. Specific coating type is not confirmed in the published specification. For installs in direct, intense UV exposure such as north-facing walls in full sun, inspect the finish periodically as part of routine site maintenance, as this applies to any powder-coated or painted outdoor hardware regardless of brand.

5. Do I need any additional adapters to use this bracket with my camera?

   In most cases, no additional adapters are required for compatible Hikvision dome and turret cameras. The bracket is designed to interface directly with Hikvision mounting footprints. If you are unsure about compatibility for your specific camera model, the team at Security Australia can confirm before you order.

6. Will this bracket allow me to adjust the camera angle after mounting?

   Camera angle adjustment on dome and turret models is handled by the camera's own three-axis or tilt adjustment, not by the bracket. The DS-220AZJ-145-BA positions the camera on the wall at a fixed bracket angle. Fine directional aiming is then done via the camera head itself during installation, which is standard practice for dome and turret camera installs.

Downloads & Resources

No downloads available for this product.