Hikvision DS-1701ZJ-AC1(OS) Wall mount, Stainless steel with anticorrosive coating, silver moon gray

Model: DS-1701ZJ-AC1(OS)

Who This Is For

For installers and facility managers who need a wall mounting solution that holds up in demanding outdoor environments without corroding, rusting, or degrading the appearance of the installation over time. The Hikvision DS-1701ZJ-AC1(OS) is a stainless steel wall mount finished in silver moon gray with an anticorrosive coating - purpose-built for coastal, industrial, and high-humidity sites where standard zinc or powder-coated steel brackets fail prematurely. At 412.5 mm in arm length and rated to carry up to 3800 g, it handles heavier Hikvision dome and bullet cameras securely, projecting the camera away from the wall to clear eave obstructions or get the right viewing angle on a wide approach. If you are specifying a long-life outdoor installation and the mounting bracket is as important as the camera itself, this is the bracket to reach for.

What This Mount Actually Does

Who Buys This Model

• Coastal and marine property installers: Specifying this bracket because standard zinc or powder-coated steel mounts corrode within 1-2 seasons in salt air, and the stainless steel with anticorrosive coating on the DS-1701ZJ-AC1(OS) is built to last in those conditions.
• Food processing and cold storage facilities: Requiring a mount that withstands regular wash-down, chemical cleaning agents, and high-humidity interiors where corrosion accelerates rapidly on standard mild steel brackets.
• Commercial and industrial site managers: Mounting heavier Hikvision cameras on external walls where the 3800 g weight rating and 412 mm arm provide both the structural capacity and the projection needed for the correct camera angle.
• Architects and builders on prestige commercial projects: Selecting the silver moon gray stainless finish to match facade materials and maintain a consistent aesthetic across camera mounting points on the building exterior.

Honest Assessment

The DS-1701ZJ-AC1(OS) does one thing well: it provides a corrosion-resistant, heavy-duty wall mounting platform for Hikvision cameras in environments where a standard bracket would deteriorate. The stainless steel body with anticorrosive coating is the primary differentiator, and the 3800 g weight capacity means it is not limited to lightweight models. The 412.5 mm arm projection is long enough to clear most eave and soffit obstructions and to position the camera away from walls that would cause IR interference at night. It is available through Security Australia as part of the Hikvision accessories range. What it will not do is suit installations where a low-profile or flush-wall mount is needed - the arm projection is substantial and will be visually prominent. If you need a shorter reach or a corner mount for an inside 90-degree junction, a different bracket form factor within the Hikvision range will serve better.

Before You Buy

Quick Fit Check

• Good match if: You are mounting a Hikvision camera in a coastal, marine, or high-humidity environment where the stainless steel body and anticorrosive coating will prevent the bracket from corroding before the camera reaches the end of its service life.
• Good match if: Your camera requires a wall mount that can support up to 3800 g and project the camera 412.5 mm from the wall surface to achieve the correct viewing angle or to clear eave obstructions.
• You may need a different model if: You need a compact or low-profile wall mount - the arm length on this bracket makes it a poor fit for tight spaces or installations where a flush or short-reach mount is required. A shorter-arm bracket model from the Hikvision accessories range would be more appropriate.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need a wall mount that will not corrode in a coastal, marine, or chemically aggressive environment - the stainless steel body with anticorrosive coating is the defining reason to specify this over a standard aluminium or powder-coated steel bracket.
• You may need a different model if: You need a short-reach or compact wall mount - the 412.5 mm arm projection is substantial and not suited to tight or recessed mounting locations. A short-arm or adjustable-angle bracket type from the Hikvision accessories range would be more appropriate for those scenarios.
• Pairs well with: Hikvision outdoor bullet or dome cameras with a wall-mount compatible base plate, particularly heavier varifocal or long-range IR models where both the weight capacity and the arm projection are put to use.

Common Questions

1. Will this bracket fit any Hikvision camera, or only specific models?

   It fits a wide range of Hikvision cameras, but not universally every model. The DS-1701ZJ-AC1(OS) uses the standard Hikvision wall-mount interface, which is compatible with most Hikvision dome, bullet, and turret cameras that support a separate wall bracket. You should cross-reference the camera's own datasheet to confirm it lists a compatible wall mount in the DS-1701ZJ bracket family before ordering.

2. Does this mount work outdoors in a coastal or beachside location?

   Yes. The stainless steel construction combined with the anticorrosive coating is specifically what makes this bracket suitable for coastal and salt-air environments. Standard zinc or powder-coated aluminium brackets degrade quickly near the ocean - the material choice on this mount is the reason to specify it for those conditions.

3. What is the maximum camera weight this bracket can support?

   The rated weight capacity is approximately 3800 g (8.38 lb). This is sufficient for the majority of Hikvision outdoor cameras, including larger varifocal bullet and dome models with integrated IR arrays. If you are mounting a PTZ camera, check the PTZ model's weight against this figure - some larger PTZ units exceed this rating and require a dedicated PTZ wall mount.

4. How far does the bracket project the camera from the wall?

   The arm length is 412.5 mm, projecting the camera approximately 412 mm out from the wall surface. This is long enough to clear most eave and soffit edges and to position the camera away from textured or reflective wall surfaces that would cause IR wash-back interference at night. If you need a shorter projection, check the Hikvision bracket range at Security Australia for a short-arm alternative.

5. Is this bracket suitable for indoor use as well, or is it only for outdoor installations?

   It is rated for both indoor and outdoor installation. Indoors, the stainless steel construction is the right choice for food processing plants, cold storage facilities, and any interior environment where moisture, cleaning chemicals, or condensation would corrode a standard steel or zinc bracket over time.

6. What fixings and anchors should I use to install this bracket?

   This depends on your wall substrate. The combined weight of the bracket and the camera is significant - up to approximately 3800 g at full load plus the bracket's own mass. On solid brick, block, or concrete, standard M8 masonry anchors are appropriate. On hollow masonry or lightweight cladding, use chemical anchors or through-bolts to ensure the fixing is rated for the dynamic load. No specific fixing hardware is included with the bracket.

Downloads & Resources

No downloads available for this product.