Hikvision Camera Dome Mounting Bracket DS-220AZJ-130-WA Wall Mount Bracket – Metal White Dome & Turret Camera Mount

Model: DS-220AZJ-130-WA

Who This Is For

Property managers specifying camera positions on rendered brick, weatherboard, or masonry walls often run into one consistent problem - dome and turret cameras mounted flush to a flat wall lose their downward viewing angle before they ever capture anything useful. The DS-220AZJ-130-WA solves that directly. This metal wall mount bracket projects the camera body away from the wall surface, giving installers the clearance needed to angle dome and turret cameras downward without the housing fouling against the mounting surface. Finished in white, it suits most residential eaves, soffit edges, and commercial fascia applications without standing out. Built from metal rather than plastic, it holds its position under vibration and wind load where cheaper alternatives can shift over time. If you are running Hikvision dome or turret cameras on exterior walls and need a clean, stable mounting solution that actually delivers the correct field of view, this bracket is the right starting point.

What This Actually Does

Who Buys This Model

• Residential installers: Adding wall-mount positions to homes where no soffit overhang exists and cameras must be positioned directly on brick or weatherboard cladding.
• Commercial integrators: Deploying Hikvision dome cameras across office exteriors, carparks, and shopfronts where a clean white finish is specified and metal rigidity is required.
• DIY system builders: Completing a Hikvision dome or turret installation and needing the correct OEM-matched bracket rather than a generic alternative that may not align mounting hole patterns correctly.
• Property managers: Replacing failed or corroded plastic brackets on existing camera installations without replacing the camera itself, restoring position stability at minimal cost.

Honest Assessment

The DS-220AZJ-130-WA does one job - it gets a dome or turret camera off the wall surface and into a position where it can actually cover its intended zone. The metal build is a genuine advantage over the cheap plastic brackets that ship bundled with budget cameras. For white Hikvision dome and turret deployments on exterior walls, this is the straightforward choice. What it will not do is suit dark-coloured or grey camera bodies, where the white finish will create a visual mismatch. It also does not replace a pendant mount, pole mount, or corner bracket where those geometries are needed. If your install is on a corner junction, a curved surface, or requires a camera to drop down from height, a different bracket type is more appropriate. The DS-220AZJ-130-WA is stocked by Security Australia as a standalone accessory for exactly these wall-position scenarios.

Before You Buy

Quick Fit Check

• Good match if: You are mounting a white Hikvision dome or turret camera on a flat exterior wall and need the camera body to stand off the surface to achieve a proper downward viewing angle.
• Good match if: You are replacing a failed plastic bracket on an existing Hikvision dome installation and want a metal replacement that will hold its position long-term without warping or loosening.
• You may need a different model if: Your install requires a corner mount, pendant drop, or pole-mount configuration - those geometries need purpose-built bracket types available elsewhere in the Hikvision accessory range at securityaustralia.com.au.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need a metal, white-finish wall standoff bracket for a Hikvision dome or turret camera on a flat exterior surface where the camera must angle downward without the housing contacting the wall.
• You may need a different model if: Your camera position requires a corner bracket, pendant mount, or pole-mount configuration - these are different bracket types suited to different installation geometries and are available in the Hikvision accessory range at securityaustralia.com.au.
• Pairs well with: Hikvision white dome or turret cameras installed on exterior walls, particularly 2MP or 4MP models in the DS-2CD series turret and dome range.

Common Questions

1. Will this bracket fit any brand of dome camera, or is it Hikvision-specific?

   It is designed for Hikvision dome and turret cameras. While the physical mounting screws may align with some third-party cameras, the DS-220AZJ-130-WA is engineered to the Hikvision mounting pattern and base dimensions. Using it with non-Hikvision cameras is not confirmed and could result in misalignment or an insecure fit.

2. Does this bracket include wall anchors and fixing hardware?

   No. Wall anchors, rawl plugs, and screws appropriate for your wall substrate are not included. The correct anchor type depends entirely on whether you are fixing into masonry, brick, timber frame, or lightweight steel stud - each requires a different fixing rated for the combined load of the bracket and camera.

3. Will this bracket work for both indoor and outdoor installations?

   Yes. The metal construction and white powder coat finish are suitable for exterior wall use. The bracket itself does not have an independent IP rating - weather protection for the overall installation depends on the IP rating of the camera body mounted to it, not the bracket.

4. Can I route the camera cable through this bracket?

   The DS-220AZJ-130-WA is designed to allow cable routing from the camera through the bracket body and into the wall. Confirm your cable diameter is compatible before installation - this is the cleanest routing method and protects the cable run from UV exposure at the wall entry point. Security Australia stocks this bracket specifically for these tidy wall-mount installations.

5. Does this suit the Hikvision DS-2CD series turret cameras?

   Yes. The DS-220AZJ-130-WA is matched to Hikvision dome and turret camera bodies including those in the DS-2CD series range. Always cross-reference the specific camera model's datasheet to confirm the mounting base compatibility before installation, as body dimensions can vary across generations within the same series.

6. Why choose metal over a plastic wall bracket for a dome camera?

   Metal holds its position. Plastic brackets can warp under prolonged UV exposure in Australian conditions, loosen over time from thermal expansion cycles, and flex under wind load - all of which cause camera drift from the original aimed position. A metal bracket maintains the camera's set angle without ongoing readjustment.

Downloads & Resources

No downloads available for this product.