Hikvision AX PRO Series DS-PDEBP2-EG2-WB Portable Wireless Dual Emergency Button

Model: DS-PDEBP2-EG2-WB

Who This Is For

When fast-access emergency alerting is the priority, the Hikvision AX PRO DS-PDEBP2-EG2-WB Portable Wireless Dual Emergency Button gives installers and end users a compact, wire-free panic trigger that connects directly into an AX PRO alarm system. It suits aged care providers adding personal duress capability to existing Hikvision installations, small businesses wanting a discrete under-counter panic trigger, residential users with medical or personal safety needs, and property managers who need a portable device that can be repositioned without running new cable. The dual-button design lets each button be configured for a different alert type - for example, medical versus intruder - so a single device can serve more than one response scenario. With an 800m open-area wireless range and up to 3 years of battery life from a single CR2450 cell, it is built for set-and-forget deployments where maintenance access is limited.

What This Device Actually Does

Who Buys This Model

• Aged care and NDIS facility operators: Adding personal duress capability to an existing AX PRO system without running new cable to individual rooms or common areas.
• Retail and small business owners: Mounting a discreet under-counter panic trigger at a service counter or cash desk, independently configured from the building's general alarm zones.
• Residential AX PRO users with medical needs: Carrying the device as a personal alarm within the home, with one button assigned to a medical alert and the other to a security event.
• Security installers expanding AX PRO deployments: Adding supplementary duress points to an existing installation without additional wiring, particularly in heritage buildings or leased spaces where cable runs are restricted.

Honest Assessment

The DS-PDEBP2-EG2-WB does its specific job well. The dual-button configuration, two-way RF confirmation, and 3-year battery life make it a practical choice for any AX PRO installation that needs a fast-access duress trigger without cabling. Front and rear tamper protection is a genuine feature rather than a marketing addition, and the portability means it is not fixed to one spot once installed. For aged care, retail duress, or home personal safety use within an AX PRO ecosystem, it covers the core requirement cleanly. What it will not do is operate as a standalone device - it requires an AX PRO wireless alarm panel to function, and it is not compatible with third-party or older Hikvision alarm systems. It is also not a GPS or cellular personal alarm; range is limited to wireless proximity of the panel. If the requirement is for a standalone wearable alarm with cellular connectivity, a different product category is more appropriate. The DS-PDEBP2-EG2-WB is supplied by Security Australia as part of the broader AX PRO wireless accessory range.

Before You Buy

Quick Fit Check

• Good match if: You have an existing Hikvision AX PRO wireless alarm panel and need to add a duress or medical alert trigger without running any new cable to the location.
• Good match if: You need a single device to cover 2 different alert types - for example, medical and security duress - because each button can be independently assigned to a different zone.
• You may need a different model if: The requirement is for a portable personal alarm that operates independently of a fixed alarm panel - a cellular or GPS-based personal alarm device is a more appropriate product type for that use case.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You are adding wireless duress or medical alert capability to an existing Hikvision AX PRO installation and need 2 independently assignable alert zones from a single compact device.
• You may need a different model if: The alert trigger needs to operate independently of a fixed alarm panel - a standalone cellular or GPS personal alarm is a more appropriate product type for off-site or mobile use.
• Pairs well with: A Hikvision AX PRO wireless alarm hub with Hik-Connect monitoring configured, so panel alerts generate push notifications or monitoring centre events the moment either button is pressed.

Common Questions

1. Will this emergency button work with my existing Hikvision alarm panel?

   Only if your panel is from the AX PRO wireless series. The DS-PDEBP2-EG2-WB uses the AX PRO 433MHz two-way RF protocol and will not enrol into older Hikvision alarm panels or third-party systems. Check your panel model against the AX PRO compatible device list before purchasing.

2. Do both buttons trigger the same alarm, or can they be set up differently?

   They can be set up differently. Each button is assigned to a separate zone on the AX PRO panel, which means each can trigger a distinct alarm type, response profile, or output. A common configuration is one button for medical alert and one for security duress, but this is fully configurable through the panel or Hik-Connect app.

3. Does the device confirm that the panel received the alert when a button is pressed?

   Yes. The two-way RF communication means the panel sends an acknowledgement signal back to the device after receiving the alert. This is confirmed by the LED indicator on the device, so the user knows the alert was received rather than just transmitted.

4. How long does the battery last and how will I know when it needs replacing?

   The single CR2450 battery is rated for up to 3 years in working status. When the battery drops below threshold, the device sends a low-battery alert to the AX PRO panel, which triggers a notification through the system or Hik-Connect app well before the device stops functioning.

5. Can this device be carried around or does it have to stay wall mounted?

   It can be used both ways. The wall-mounting option provides a fixed installation for under-counter or desk use, but the device is compact enough at 45.5g to be carried in a pocket or worn on a lanyard within wireless range of the AX PRO panel. Range will reduce indoors compared to the 800m open-area specification.

6. What happens if someone tries to remove or tamper with the device?

   An immediate tamper alert is sent to the AX PRO panel. Tamper detection is active on both the front face and the rear of the device, so attempts to force the casing or remove the unit from its wall mount both trigger an alert. This makes it suitable for installations where the device itself needs to be protected against interference. The DS-PDEBP2-EG2-WB is available through Security Australia as part of the Hikvision AX PRO wireless accessory range.

Downloads & Resources

No downloads available for this product.