Dahua DH-PFS3010-8ET-96 8-Port PoE Switch

Model: DH-PFS3010-8ET-96-V2

Who This Is For

When running separate power cables to every IP camera is the installation challenge, a dedicated PoE switch eliminates that problem entirely. The Dahua DH-PFS3010-8ET-96 is built for security installers and integrators deploying up to 8 IP cameras from a single compact switch - without touching a managed interface or writing a line of configuration. Its 96W total PoE budget covers mixed-draw installations, while the long-distance PoE function extends transmission up to 250m, which makes it genuinely useful on properties where camera positions push well beyond standard cable limits. Port 1 supports up to 90W under IEEE802.3bt and Hi-PoE standards, so a high-draw PTZ or multi-sensor camera won't force a separate injector. The plug-and-play design means technicians can commission the switch quickly and move on, with the PoE watchdog handling device recovery automatically if a connected camera locks up.

What This Switch Actually Does

Who Buys This Model

• Security installers on small-to-mid site jobs: 8 PoE ports cover a single NVR system's full camera count, and the plug-and-play operation means no switch configuration is needed on-site.
• Integrators with high-draw devices: Port 1's 90W capacity handles IEEE802.3bt PTZ cameras or multi-sensor units that standard 30W switches cannot power.
• Installers on properties with long cable runs: Residential acreage, warehouses, and rural commercial sites where camera positions regularly exceed 100m benefit directly from the 250m long-distance PoE function.
• Facilities managers in harsh or unconditioned spaces: The -10°C to +55°C operating range and metal chassis make this switch suitable for equipment rooms that don't maintain consistent ambient temperature.

Honest Assessment

The DH-PFS3010-8ET-96 does its core job well: it powers up to 8 IP cameras from a single compact unit, handles the occasional long cable run without extra hardware, and recovers frozen devices automatically via PoE watchdog. The 90W port 1 capability genuinely extends what's possible on a small switch. For most 4-to-8 camera NVR-based installations, this switch is a practical fit. What it will not do is provide VLAN segmentation, traffic monitoring, or any managed network functions - if a site requires network isolation between camera VLANs and corporate data traffic, a managed PoE switch is the appropriate product type. The 96W total budget also means running port 1 at full 90W leaves very little headroom for the remaining 7 ports, so high-power mixed installations need careful load planning. Available through Security Australia, this switch suits straightforward surveillance deployments where simplicity and long-distance reach matter more than network management.

Before You Buy

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need a plug-and-play switch to power up to 8 IP cameras, have at least one high-draw device requiring 90W on port 1, or have cable runs beyond 100m that rule out standard PoE switches.
• You may need a different model if: Your site requires VLAN separation, traffic prioritisation, or remote network management - a managed PoE switch is the appropriate product type for those requirements.
• Pairs well with: An 8-channel PoE NVR for a self-contained surveillance system, or a rack-mounted NVR where this switch handles camera-side PoE distribution independently from the network uplink.

Common Questions

1. Does this switch need any configuration before it will power cameras?

   No. The DH-PFS3010-8ET-96 is an unmanaged switch that operates on a plug-and-play basis. Connect power, plug in your cameras and uplink cable, and the switch negotiates PoE delivery automatically. There is no web interface, no CLI, and no setup procedure required.

2. Will this switch power a PTZ camera that needs more than 30W?

   Yes, but only on port 1. Port 1 supports IEEE802.3bt and Hi-PoE at up to 90W, which covers the power requirements of most motorised PTZ cameras currently on the market. Ports 2-8 are each limited to 30W (IEEE802.3at), which is sufficient for standard fixed IP cameras but will not power high-draw devices on those ports.

3. How far can I actually run a camera cable from this switch?

   Up to 250m using Cat5e or Cat6 with a DC resistance below 10 ohms per 100m. Beyond the standard 100m limit, bandwidth drops to 10 Mbps and available load capacity reduces with distance - at 250m under BT 90W mode, the confirmed load capacity is 40W. Dahua's published data used a 53V supply voltage, and actual performance will vary based on cable quality and device draw.

4. What happens if the total PoE load exceeds 96W?

   The intelligent PoE management system steps in before a full shutdown occurs. When total consumption approaches the 96W threshold, the switch reduces power to higher-numbered ports first, preserving power to lower-numbered ports. This means cameras on ports 1-4 are prioritised over cameras on ports 5-8 under heavy load conditions. Stocked by Security Australia, this feature is designed to prevent a single overloaded installation from dropping all connected devices simultaneously.

5. Does the PoE watchdog restart all ports or just the affected device?

   Just the affected port. The PoE watchdog monitors each connected device independently and power-cycles only the port where a device has stopped responding. Other cameras connected to the switch continue operating normally. This is confirmed as a per-port function, not a full-switch reboot.

6. Will this switch work in an outdoor enclosure or unheated equipment room?

   Yes, within its confirmed operating range of -10°C to +55°C. For fully outdoor, unenclosed deployment, the switch would need a weatherproof cabinet as it has no IP rating for direct exposure to rain or moisture. For indoor unconditioned spaces - cool rooms, plant rooms, unheated sheds with enclosed mounting - the temperature range covers most Australian installation conditions.

Downloads & Resources

No downloads available for this product.