Dahua DH-PFA106 Dahua Mini Dome and Turret Mount Adapter

Model: DH-PFA106

Who This Is For

When mounting flexibility is the priority and a standard ceiling or wall surface does not suit the camera's base footprint, the Dahua PFA106 Mini Dome and Turret Mount Adapter fills that gap. It is designed for installers fitting compatible Dahua mini dome or turret cameras to surfaces where a direct flush mount is not possible - think conduit entry points, uneven masonry, or installations where the cable needs to exit cleanly through a wall rather than a ceiling. Electricians and security integrators working on apartment fit-outs, small offices, and retail fit-outs regularly specify this adapter to keep the finished installation neat and code-compliant. It bridges the camera's base to the mounting surface while providing a clean pathway for cables, eliminating surface-level conduit runs that compromise both aesthetics and weatherproofing on the final install.

What This Actually Does

Who Buys This Model

• Security Installers: Integrators running structured cable installs who need the wall or ceiling cable entry point to align cleanly with the camera base rather than routing cable externally.
• Electricians on New Builds: Trades fitting Dahua cameras during construction where conduit is pre-run to a back-box position and a direct flush mount is not practical without an adapter.
• Retail and Office Fit-Out Contractors: Installers specifying Dahua mini dome cameras in finished commercial interiors where exposed cable or non-flush mounting would be rejected by the client.
• System Integrators Standardising on Dahua: Teams buying accessories in volume to support consistent installation practices across multiple sites using compatible Dahua turret and mini dome models.

Honest Assessment

The PFA106 does one job and does it well: it gives installers a clean, manufacturer-matched mounting solution for compatible Dahua mini dome and turret cameras where a direct flush mount is not the right fit. The cable management pathway is the practical benefit that justifies specifying it over a generic bracket - it keeps the install tidy and reduces the chance of cable damage at the entry point. It is available through Security Australia as part of the broader Dahua accessories range, which makes pairing it with the right camera model straightforward. That said, this adapter is not a universal fit - it is designed for specific compatible Dahua mini dome and turret models, so confirming camera model compatibility before ordering is essential. It will not add any weatherproofing rating beyond what the camera itself provides, and it is not a substitute for a dedicated wall arm or pendant mount where a different camera angle is needed.

Before You Buy

Quick Fit Check

• Good match if: You are mounting a compatible Dahua mini dome or turret camera to a surface where the cable needs to enter from behind the mount rather than through a ceiling void, and a clean factory-matched finish is required.
• Good match if: You are standardising a multi-site Dahua install and need a consistent, repeatable accessory that pairs correctly with the camera base geometry without field modification.
• You may need a different model if: You need to reposition the camera at a significant angle from the mounting surface - a dedicated wall arm, corner mount, or pendant adapter from the Dahua accessories range will be more appropriate for that application.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need a manufacturer-matched mounting adapter for a compatible Dahua mini dome or turret camera that handles surface cable entry cleanly without a generic workaround.
• You may need a different model if: Your installation requires the camera to be repositioned at an angle from the surface, mounted on a pole, or installed at a corner - a Dahua wall arm, corner mount, or pendant adapter will be more appropriate for those applications.
• Pairs well with: Compatible Dahua mini dome or turret network cameras and a standard PoE network switch or NVR for a complete structured cabling install.

Common Questions

1. Will the PFA106 work with any Dahua camera?

   No. The PFA106 is designed for compatible Dahua mini dome and turret camera models only. Dahua produces a range of mounting accessories for different camera housings and base diameters - bullet cameras, large-body domes, and PTZ cameras use different adapters. Always confirm your camera model is listed as compatible with the PFA106 before ordering.

2. Does this adapter change the IP rating of the camera?

   No. The PFA106 is a mounting adapter and does not alter the ingress protection rating of the camera it supports. The camera's rated IP rating applies to the camera housing itself. If the installation environment requires a sealed outdoor mount, the camera model selected should carry the appropriate IP rating independently of the adapter.

3. Does this work for wall mounting as well as ceiling mounting?

   Yes, in most cases. The PFA106 functions as a surface mount adapter and can be used on walls or ceilings depending on where the cable exits and where a flush mount profile is needed. However, if a significant downward or angled view is required from a wall position, a dedicated wall arm or tilt mount from the Dahua accessories range will give you better control over camera angle than this adapter alone.

4. Is this the same as a junction box?

   It serves a similar purpose. The PFA106 provides a cable entry and routing pathway at the mount point, similar in function to a surface-mounted back box. It is specifically engineered for the Dahua mini dome and turret camera base profile, which means the fitment, cable routing, and finished appearance are purpose-designed rather than adapted from a generic electrical accessory. The Dahua accessories range stocked by Security Australia includes this and other mounting options for different install requirements.

5. Do I need any special tools or hardware to fit the PFA106?

   No special tools are required. Installation uses standard fixings appropriate to the mounting surface - masonry anchors for concrete or brick, timber screws for plasterboard into a stud, or appropriate fasteners for the substrate. The adapter is designed to be fitted as part of a standard security camera installation process without requiring custom hardware beyond what the surface type demands.

Downloads & Resources

No downloads available for this product.