AXIS TQ6820-E Solo Kit for Q60-E Network Camera Stand-Alone Installation
When a clean, stand-alone outdoor installation is the requirement, the AXIS TQ6820-E Solo Kit gives installers everything needed to mount an AXIS Q60-E series network camera without additional infrastructure. Designed for wall or ceiling-mounted deployments, the kit simplifies single-camera setups in exposed environments. Compatible exclusively with Q60-E series cameras.
Why This Model
- Stand-alone mounting solution: Eliminates the need for additional mounting infrastructure, keeping single-camera outdoor installations tidy and straightforward.
- Q60-E series compatibility: Engineered specifically for AXIS Q60-E network cameras, ensuring a secure mechanical and weatherproof fit without improvised adapters.
- Outdoor-ready build: Suited to exposed installation environments where a purpose-built, durable mount is needed rather than a generic bracket.
Need help choosing?
Click to ask a question - same day response (~2 hours during business hours)
Product Overview
Model: AXIS TQ6820-E
Who This Is For
Security integrators deploying the AXIS Q60-E series PTZ camera as a stand-alone unit - rather than as part of a multi-sensor or corridor configuration - need a mounting solution that is purpose-built for that exact scenario. The AXIS TQ6820-E Solo Kit provides the mechanical and interface components required to complete a clean, independent installation of a Q60-E network camera without relying on additional Axis multi-directional system hardware. It suits installers specifying a single PTZ position on a pole, wall bracket, or parapet where the camera operates autonomously. This kit removes the guesswork from a stand-alone Q60-E deployment, ensuring mounting compatibility, correct cable management paths, and a finished result that meets Axis installation standards for outdoor PTZ positioning.
What This Kit Actually Does
Stand-Alone Enablement
The TQ6820-E provides the interface and mounting components that allow a single Q60-E PTZ camera to be installed independently - without requiring it to sit within a multi-sensor Axis Q60-E assembly. It is the correct hardware path for a solo PTZ position.
Purpose-Matched Compatibility
Designed specifically for the AXIS Q60-E network camera series, this kit ensures mechanical fit and cable routing align with Axis engineering tolerances - avoiding the improvisation and void-of-warranty risks that come with third-party mounting workarounds.
Clean Cable Management
The kit includes the hardware needed to route network cabling cleanly through the mount assembly. For outdoor PTZ installations where ingress protection and a tidy conduit path matter, this removes field improvisation from the cable entry point.
Outdoor-Ready Construction
Built to complement the AXIS Q60-E's outdoor-rated enclosure, the TQ6820-E is constructed to withstand the same environmental exposure as the camera it supports - keeping the overall installation consistent for external deployments.
Who Buys This Model
- Security Integrators: Installers who have specified a single AXIS Q60-E PTZ as a stand-alone position and need the correct Axis-approved mounting kit to complete the job without third-party workarounds.
- Facilities and Infrastructure Teams: In-house technical teams managing Axis PTZ deployments at transport, utilities, or campus sites where a single Q60-E needs to be mounted independently at a fixed pole or parapet position.
- System Designers Adding PTZ Positions: Specifiers expanding an existing Axis system with an additional stand-alone Q60-E node who need the matching solo installation hardware to maintain a uniform, manufacturer-supported setup.
- Project Managers Sourcing Axis Accessories: Those responsible for procurement on Axis-standardised sites where all mounting hardware must be genuine Axis product to satisfy installation warranties or client specifications.
Honest Assessment
The AXIS TQ6820-E does one thing well: it solves the specific problem of deploying an AXIS Q60-E PTZ camera as a stand-alone unit using genuine Axis hardware. For integrators who need a manufacturer-matched mounting solution - rather than adapting a generic bracket - this kit removes compatibility uncertainty and keeps the installation within Axis's supported configuration. It is a purpose-specific accessory, not a universal PTZ mount, and that specificity is exactly its value on the right job. What it will not do is serve as a general mounting solution for other Axis PTZ models, nor will it suit installers looking for a flexible multi-camera mounting platform. If the deployment involves pairing the Q60-E with other sensor units in a multi-directional configuration, a different Axis mounting system applies. The TQ6820-E is stocked by Security Australia for integrators who know they need this exact Axis accessory and want genuine product supplied locally.
Before You Buy
Installer Note: The TQ6820-E is specifically for stand-alone Q60-E installations - confirm your deployment is a single independent Q60-E unit before ordering. If the Q60-E camera is being integrated into a multi-sensor or companion-unit configuration, the required mounting hardware will differ. Check the Axis Q60-E mounting compatibility matrix against your bracket type (pole, wall, pendant) before committing to this kit, as separate Axis pendant tubes or wall brackets may be required depending on your installation surface.
Quick Fit Check
- Good match if: You are installing a single AXIS Q60-E PTZ camera as a stand-alone unit and need the genuine Axis interface kit to complete the mount without improvising a third-party solution.
- Good match if: Your site specifies genuine Axis accessories throughout and you need the TQ6820-E to keep the Q60-E installation within Axis's supported hardware configuration for warranty and compliance purposes.
- You may need a different model if: The Q60-E is being deployed alongside companion sensor units in a multi-directional assembly - a different Axis mounting system will apply for that configuration. Check the broader range of Axis Q-series mounting accessories on securityaustralia.com.au.
Key Features & Technical Specifications
Real-World Scenarios
How It Compares
- Choose this if: Your deployment is a single AXIS Q60-E PTZ operating independently and you need the genuine Axis solo installation kit to complete a clean, manufacturer-supported mount.
- You may need a different model if: The Q60-E is being combined with companion Axis sensor units in a multi-directional configuration - a different Axis multi-sensor mounting system will be required for that application. Browse the broader Axis mounting accessory range on securityaustralia.com.au.
- Pairs well with: AXIS Q60-E series network PTZ camera (the camera this kit is specifically designed to support) and a compatible Axis pendant tube or wall bracket suited to your mounting surface.
Common Questions
-
Will the TQ6820-E work with any Axis PTZ camera, or only the Q60-E series?
Only the AXIS Q60-E series. The TQ6820-E Solo Kit is purpose-designed for the Q60-E camera and its specific mechanical interface. It is not a universal Axis PTZ mounting solution and should not be used as a substitute bracket for other Axis PTZ models - doing so would take the installation outside the supported Axis configuration. -
Does this kit include the wall bracket or pole mount, or do I need to order those separately?
No, the TQ6820-E is the interface and solo mounting kit specific to the Q60-E camera itself - it does not include a wall bracket, pole clamp, or pendant tube. Depending on your installation surface, a compatible Axis pendant tube or Axis wall bracket will need to be ordered alongside this kit to complete the full mount assembly. -
Do I need the TQ6820-E if I already have an Axis multi-sensor mounting assembly for the Q60-E?
No. The TQ6820-E is specifically for stand-alone installations where the Q60-E is deployed as a single, independent camera unit. If the Q60-E is already mounted within an Axis multi-sensor or companion-unit housing, the TQ6820-E Solo Kit does not apply to that configuration. -
Is this kit suitable for outdoor installations?
Yes. The TQ6820-E is designed to complement the AXIS Q60-E's outdoor-rated enclosure. It is built for external deployment and suits the same environmental exposure conditions as the Q60-E camera it supports. -
Where can I confirm the TQ6820-E is the correct accessory for my Q60-E installation?
Cross-reference your Q60-E camera model against the Axis product accessory selector, and confirm your mounting surface type (wall, pole, pendant) before ordering. The TQ6820-E is available through Security Australia - if you are unsure whether this kit applies to your specific Q60-E variant or mounting scenario, the product documentation on the Axis Communications website lists compatible camera models and mounting combinations.
Downloads & Resources
No downloads available for this product.
What This Product Does
When a clean, stand-alone outdoor installation is the requirement, the AXIS TQ6820-E Solo Kit gives installers everything needed to mount an AXIS Q60-E series network camera without additional infrastructure. Designed for wall or ceiling-mounted deployments, the kit simplifies single-camera setups in exposed environments. Compatible exclusively with Q60-E series cameras.
Why This Model
- Stand-alone mounting solution: Eliminates the need for additional mounting infrastructure, keeping single-camera outdoor installations tidy and straightforward.
- Q60-E series compatibility: Engineered specifically for AXIS Q60-E network cameras, ensuring a secure mechanical and weatherproof fit without improvised adapters.
- Outdoor-ready build: Suited to exposed installation environments where a purpose-built, durable mount is needed rather than a generic bracket.
Not sure if this suits your site?
Ask our team before ordering. We can help confirm lens choice, recorder compatibility, mounting accessories and project quantities.
Get Product Help
Ask our team before ordering. We can help confirm lens choice, recorder compatibility, mounting accessories and project quantities.
Shipping & Warranty
3 Years Manufacturer Warranty
All IP cameras and recording devices (NVR’s/DVR’s) are covered by a 3 year back-to-base manufacturer warranty.
Our warranty is limited to the replacement of faulty items or parts and does not include damage due to incorrect fitting of parts or accessories, or damage due to mishandling the equipment once out of the box. All faults are sent to the manufacturer for inspection and diagnosis before a replacement is sent out.
Read more about the Terms & Conditions here – https://www.securityaustralia.com.au/terms-and-conditions/
Free Delivery* & Despatch Time
*Just spend over $200 to activate Fast Free Shipping!
Despatch Times: Products are despatched on the same day if the order was placed before 11am on any weekday, Monday - Friday. All other orders are processed and despatched within 24 hours or next business day.
Order Confirmation: Once you place an order, you will receive a confirmation email. This indicates that your order has been received in our system and is now being processed for dispatch. If your item is back-ordered or unavailable, we will notify you via email, and if we do not receive a response, we will attempt to contact you by phone as soon as possible. We value your time and strive to be prompt. If your item(s) are available for immediate shipment (within 2 days), we will process the charges and prepare the order for shipping.
Shipping Times: General shipping times for StarTrack, TNT and Allied couriers are between 1-3 working days from despatch. Longer delivery times may be caused by your package being held at your local courier depot that is beyond our control. Please contact us or the local post depot for confirmation.
Tracking Numbers: all tracking numbers will be emailed to you by our warehouse processing team within the day, after your order is despatched to our local courier.
Get expert advice
Tell us what you need help with and our team will send practical product advice straight to your inbox.
AXIS TQ6820-E Solo Kit for Q60-E Network Camera Stand-Alone Installation