AXIS TQ3102 Indoor Pendant Kit | 02108-001

Model: TQ3102

Who This Is For

For installers who need to suspend a compatible Axis camera from an indoor ceiling in a pendant configuration - rather than flush-mounting it directly to the ceiling surface. The AXIS TQ3102 Indoor Pendant Kit is built for scenarios where a dropped or angled hang is the only practical option: open-plan offices with exposed concrete slab ceilings, atriums with high structural ceilings, retail floors where the camera needs to be brought down to a useful coverage height, or any indoor environment where a flush ceiling mount would place the camera too far from the scene. This kit provides the mechanical interface between the ceiling structure and the camera body, allowing for a clean, finished pendant installation without improvised hardware. It suits both security integrators completing a staged Axis deployment and facilities teams specifying a tidy internal install.

What This System Actually Does

Who Buys This Model

• Security Integrators: Completing a multi-camera Axis deployment in a large indoor space where high ceilings require the camera to be brought down to a practical monitoring height via pendant drop.
• Facilities and Property Managers: Specifying camera additions in corporate offices or retail tenancies where ceiling-flush mounting isn't viable and a clean, unobtrusive pendant finish is required by fitout standards.
• Retail and Hospitality Fit-Out Contractors: Installing Axis cameras in open-plan floor areas - supermarkets, showrooms, food courts - where pendant mounting delivers wider overhead coverage angles than a direct ceiling surface mount.
• Educational and Government Facility Installers: Mounting cameras in gymnasium halls, auditoriums, or large foyer spaces with exposed structural ceilings where the pendant configuration is the only practical installation method.

Honest Assessment

The TQ3102 does one job and does it properly: it gives you a factory-matched pendant arm for compatible Axis cameras in indoor ceiling applications. The internal cable routing keeps the installation tidy, and using genuine Axis mounting hardware means you avoid the fitment compromises that come with generic third-party brackets. For high-ceiling indoor spaces where a flush mount would place the camera too far from the monitored area, this is a practical and straightforward solution.

What it will not do is suit outdoor environments - this is strictly an indoor accessory with no weather resistance rating. It also won't work with cameras outside its confirmed compatibility range, and it doesn't add any electronic or imaging capability to the camera itself. If your installation requires an outdoor pendant or a wall-arm configuration rather than a ceiling drop, a different mount type from the Axis accessory range - available through Security Australia - would be the appropriate choice.

Before You Buy

Quick Fit Check

• Good match if: You are mounting a compatible Axis camera indoors from a high or exposed ceiling where a flush surface mount would place the lens too far above the monitored area to deliver useful coverage.
• Good match if: You need a clean, finished pendant installation with internal cable routing in a customer-facing or corporate indoor space where exposed hardware or cabling is not acceptable.
• You may need a different model if: Your installation is outdoors or in a semi-exposed area - you would need an outdoor-rated Axis pendant or wall-mount accessory instead of the TQ3102, which is rated for indoor use only.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You are mounting a compatible Axis camera from an indoor ceiling and need the camera dropped to a lower position than a flush surface mount would allow, with internal cable management included.
• You may need a different model if: Your installation is in an outdoor or semi-exposed location - an outdoor-rated Axis pendant or wall-arm mount with appropriate IP/IK rating would be the correct product type for that environment.
• Pairs well with: Compatible Axis indoor dome or multi-sensor cameras designed to accept Axis pendant mounting accessories.

Common Questions

1. Will this pendant kit work with any Axis camera?

   No. The TQ3102 is designed for specific compatible Axis camera models, not the entire Axis range. Before purchasing, check the Axis product compatibility documentation for this accessory against your confirmed camera model. Using this kit with an incompatible Axis camera can result in misaligned mounting threads, incorrect housing fit, or inadequate mechanical support.

2. Can the TQ3102 be used outdoors or in a semi-exposed undercover area?

   No. The TQ3102 is an indoor-only accessory and does not carry a weather or ingress protection rating suitable for outdoor or semi-exposed use. For undercover outdoor pendant installations - loading docks, covered walkways, carpark structures - you would need an outdoor-rated Axis pendant mount designed for that environment.

3. Does the pendant kit include cable management or does cabling remain exposed?

   Internal cable routing is provided through the pendant arm. The network cable runs concealed inside the arm structure rather than being clipped externally to it. This is a key reason the TQ3102 is specified for corporate, retail, and hospitality environments where surface-run or zip-tied cabling on a pendant arm would not meet fitout standards.

4. Does this kit include fixings and hardware for ceiling attachment?

   The TQ3102 is supplied as a pendant kit - confirm the full contents against the Axis datasheet for this part number (02108-001) before installation. Ceiling substrate anchoring - concrete anchors, T-bar grid clips, or timber fixings - will depend on your specific ceiling structure and are not universally included in camera pendant kits. Check with Security Australia if you need clarification on what is included before placing your order.

5. Will this work for a concrete slab ceiling, a suspended T-bar grid ceiling, or an exposed structural steel ceiling?

   The TQ3102 pendant arm itself attaches to whichever ceiling anchor point is installed - but the anchor method for each substrate type is different. Concrete slab requires a suitable drop-in or chemical anchor. T-bar suspended ceilings typically require a ceiling support plate bridging the grid. Exposed structural steel needs a suitable clamp or welded stud. The pendant kit provides the arm and camera interface; the ceiling-side anchor is determined by your substrate and must be specified separately.

6. Is this a genuine Axis accessory or a third-party bracket?

   Yes, this is a genuine Axis Communications accessory. The TQ3102 (part number 02108-001) is manufactured by Axis and is part of the official Axis mounting accessory range. Using genuine Axis hardware ensures the physical interface with compatible Axis cameras is engineered to the same tolerances as the camera housing itself, which matters for long-term mechanical stability in pendant configurations.

Downloads & Resources

No downloads available for this product.