AXIS TQ3101‑E Pendant Kit Outdoor/Indoor Pendant Mounting Kit

Model: TQ3101-E

Who This Is For

Property managers specifying camera placements where a flush ceiling mount simply won't work - open-plan warehouses, large retail floors, covered outdoor walkways, or exposed soffits with no flat mounting surface - will find the AXIS TQ3101-E Pendant Kit solves the problem neatly. The kit allows compatible AXIS cameras to hang down from an overhead structure on a pendant arm, bringing the lens to the correct height and angle without requiring a ceiling tile or bracket plate behind it. It is rated for both outdoor and indoor use, so the same solution covers a loading dock canopy and an internal atrium in the same project. Installers appreciate the clean factory finish and the fact that cabling routes internally through the arm rather than being surface-run. If the camera position is dictated by structure rather than preference, this pendant kit is the practical starting point.

What This Kit Actually Does

Who Buys This Model

• Security integrators on commercial fit-outs: Specifying AXIS cameras into open-plan office or retail spaces where pendant mounting is required by the architect's reflected ceiling plan.
• Facilities managers at warehouse or logistics sites: Needing to bring cameras down from high-bay ceilings to a usable coverage height over pick-and-pack areas or internal vehicle lanes.
• Installers covering mixed indoor-outdoor runs: Working on projects that include both internal atriums and covered external walkways, using a single pendant kit type across both environments.
• Hospitality and venue operators: Where surface-mounted brackets are visually unacceptable and the pendant drop provides both better coverage geometry and a cleaner presentation at ceiling level.

Honest Assessment

The TQ3101-E does one thing well: it gives installers a clean, weatherproof way to drop an AXIS camera from an overhead structure when a surface mount is not practical or not suitable. The internal cable routing is a genuine advantage over field-fabricated solutions, and the outdoor rating means it handles covered external locations without a separate weatherproof housing. It is available through Security Australia as part of the broader AXIS mounting accessory range. What this kit will not do is work with non-AXIS cameras or with AXIS models outside its confirmed compatibility list - verify your camera model against the AXIS accessory selector before ordering. It also will not substitute for a wall arm or corner bracket where the mounting surface is vertical rather than overhead. If the installation calls for a different mounting orientation, a different bracket type is the better starting point.

Before You Buy

Quick Fit Check

• Good match if: You are mounting a compatible AXIS camera from an overhead structure indoors or in a covered outdoor area and need internal cable routing for a clean result.
• Good match if: The ceiling height at your site exceeds what a flush dome mount can usefully cover and you need to drop the camera to a more practical field-of-view height.
• You may need a different model if: The mounting surface is a wall, pole, or corner rather than an overhead structure - a wall arm mount or pole bracket from the AXIS accessory range will be more appropriate for those installations.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need to drop a compatible AXIS camera from an overhead structure with clean internal cabling in an indoor or covered outdoor location.
• You may need a different model if: Your mounting surface is a wall, pole, or corner - AXIS wall arm and pole mount accessories are purpose-built for those orientations and will give a more stable and correctly angled result.
• Pairs well with: Compatible AXIS dome or turret cameras specified for the same project, and a PoE switch or NVR that supports the camera models being pendant-mounted.

Common Questions

1. Will this pendant kit work with any AXIS camera?

   No. The TQ3101-E is compatible with selected AXIS camera models only, not the entire AXIS range. AXIS produces multiple pendant variants matched to different camera housings and mounting interfaces. Before ordering, use the AXIS accessory compatibility selector to confirm that TQ3101-E is listed for your specific camera model. Ordering the wrong pendant kit is one of the most common accessory errors on multi-site projects.

2. Can this kit be used outdoors?

   Yes. The TQ3101-E is rated for both indoor and outdoor use. It is suitable for covered external locations such as carpark canopies, loading dock overhangs, and walkway structures. It is not designed for fully exposed, unprotected outdoor positions where it would face direct driving rain or prolonged submersion - a covered overhead mounting point is the intended use case.

3. Does the cable route inside the arm or does it need to be surface-run?

   Inside the arm. The TQ3101-E routes cabling internally through the pendant, so there is no need for external conduit or cable ties along the outside of the mount. This keeps the installation visually clean and protects the cable from incidental contact or tampering, which matters in both public-facing and industrial environments.

4. What structure does this kit attach to?

   It attaches to a solid overhead structure - typically a concrete soffit, steel purlin, or timber joist. It is not suitable for mounting into plasterboard or suspended ceiling tiles alone, as these cannot support the combined load of the arm and camera. If the ceiling structure at your site is concealed, confirm the substrate and use appropriate structural fixings before installation. Security Australia stocks this kit as part of the AXIS mounting accessory range.

5. Does this kit change the camera's IP or IK rating?

   No, not on its own. The pendant kit provides the mounting structure - the camera's own IP and IK ratings apply to the camera housing itself. If your installation requires a specific IP or IK rating at the camera head, verify that the camera model you are mounting meets that requirement independently of the bracket.

6. Will this work for a high-bay ceiling where the camera needs to be closer to floor level?

   Yes, that is one of the primary use cases. In warehouse or industrial spaces where ceilings exceed 6-8 metres, a ceiling-flush mount leaves the camera too far from the subject for useful identification. The pendant drop brings the camera down to a more practical monitoring height, improving the usable field of view substantially without repositioning the cable entry point at the ceiling.

Downloads & Resources

No downloads available for this product.