AXIS P3719-PLE 15MP Multi Sensor Camera, 1440p, 360 deg, Zipstream, WDR, IP66, 3-6 mm

Model: AXIS-01500-001

Who This Is For

For security managers and integrators who need to eliminate coverage gaps across large open areas without running multiple network drops, the AXIS P3719-PLE delivers 360-degree multi-sensor coverage over a single IP address and a single cable. Its 4 individually adjustable sensor heads each capture QHD 1440p video, combining for a 15MP total output that covers car parks, warehouses, transit concourses, stadiums, and large retail floors in a single camera position. Because each head carries its own varifocal 3-6mm lens with remote zoom and focus, installers can fine-tune each coverage zone from software after mounting - no ladder trips required during commissioning. The IP66-rated housing with integrated weathershield makes it equally viable for covered outdoor positions such as loading dock overhangs or building perimeters where full environmental protection is required.

What This Camera Actually Does

Who Buys This Model

• Large Retail and Shopping Centre Managers: Covering open floor areas, atria, or food courts with a single ceiling drop rather than 4 separate camera positions and 4 network runs - reducing both installation cost and NVR channel count.
• Transport and Transit Operators: Platform monitoring, bus interchange coverage, or concourse oversight where a single mounting point must deliver complete situational awareness of pedestrian flow from all directions simultaneously.
• Commercial Property and Facilities Teams: Car park overviews, loading dock perimeters, and building entrances in covered outdoor environments where IP66 protection is required and running multiple cable routes is cost-prohibitive.
• Security Integrators on Multi-Site Contracts: Projects where NVR channel licensing is a budget constraint - getting full 360-degree coverage on a single channel licence reduces system cost at scale across multiple sites.

Honest Assessment

The AXIS P3719-PLE does two things genuinely well: it consolidates wide-area coverage into a single network connection, and it lets installers fine-tune each sensor zone remotely after mounting. The combination of individually adjustable varifocal heads, per-sensor 1440p resolution, 360-degree IR, and Zipstream compression in H.265 gives integrators a technically complete solution for positions where multiple cameras would otherwise be required. The IP66 rating makes it viable in covered outdoor environments without additional housing. What it will not do is replace a PTZ where operators need to actively track a subject across a large area in real time - the P3719-PLE is a fixed multi-sensor camera, not a tracking device. Two-way audio also requires an optional AXIS T61 interface rather than being built in. For sites where active operator control and long-range optical zoom are the priority, a PTZ model available through Security Australia would serve that need better.

Before You Buy

Quick Fit Check

• Good match if: You need 360-degree area coverage from a single ceiling or wall mount with one cable run - the 4 independently aimed QHD sensors and single IP address make this the right tool for open-plan spaces, car parks, and transit concourses.
• Good match if: Your site has mixed indoor/covered outdoor positions with challenging lighting - the combination of WDR per sensor and 360-degree integrated IR handles both direct sunlight contrast and complete darkness without supplementary equipment.
• You may need a different model if: Your monitoring requirement is operator-driven active tracking across long distances - a PTZ camera with optical zoom and auto-tracking would serve that application more effectively than a fixed multi-sensor unit.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need 360-degree fixed multi-sensor coverage on a single IP address and single cable - delivering 15MP combined output across 4 independently aimed 1440p zones from one camera position.
• You may need a different model if: Your application requires operator-controlled active tracking, long-range optical zoom, or real-time subject following across a large outdoor area - a PTZ camera is the more suitable product type for those requirements.
• Pairs well with: A compatible Axis NVR or VMS with multi-stream support, and a PoE+ capable switch or midspan that can supply adequate power per port for multi-sensor camera operation.

Common Questions

1. Does this camera actually produce four separate video streams, or does it stitch them into one panoramic image?

   Four separate, independently configurable streams. Each of the 4 sensor heads produces its own H.264 or H.265 stream at up to 2560x1440, running simultaneously. There is no forced panoramic stitching - the streams can be viewed and recorded individually, which also means each head's WDR, exposure, and image settings apply independently to that zone rather than being averaged across the whole image.

2. Will this camera work for a car park where there is no existing lighting at night?

   Yes, provided the scene falls within the IR illumination range. The P3719-PLE includes integrated IR across all 4 directions, so it does not require supplementary lighting to produce video in complete darkness. The IP66 rating and integrated weathershield also make it suitable for partially covered outdoor environments with exposure to moisture and temperature variation typical of car park structures.

3. How does the single IP address work when there are 4 sensors - does my NVR see one camera or four?

   One camera. The P3719-PLE presents all 4 sensor streams under a single IP address, which means your VMS or NVR manages one device connection regardless of how many individual streams you pull from it. This is a direct benefit for software licensing models that charge per camera and for network management where device count matters. Individual streams are still accessible and configurable independently through the camera's own interface.

4. Does Zipstream actually make a meaningful difference with 4 streams running at 1440p?

   Yes, and the impact is proportionally larger with 4 high-resolution streams than with a single stream. Zipstream in H.265 dynamically reduces the bitrate in static scene areas - empty floor space, blank walls, unoccupied lanes - while retaining full bitrate only in zones where motion or detail matters. Across 4 simultaneous 1440p streams, the cumulative bandwidth and storage reduction is substantial compared to a fixed-bitrate configuration at equivalent quality settings. This is one of the key reasons the camera is practical to run on standard network infrastructure.

5. Can I adjust the lens zoom on each head remotely, or do I need to be at the camera?

   Remotely. Each of the 4 varifocal lenses (3-6mm) supports remote zoom and focus via software, so coverage zone framing can be refined from a laptop or the NVR interface after the camera is physically mounted and cabled. Physical head orientation - pan, tilt, roll, and twist - still needs to be set at the mount itself, but focal length and focus plane are adjusted without ladder access after installation.

6. What are the DORI distances for detection, observation, recognition, and identification on each sensor?

   Specific published DORI distances for the P3719-PLE are not listed in the available specification data. As a general guide, a 3-6mm varifocal lens at 1440p resolution is optimised for wide-area detection and observation rather than identification at distance - it is a coverage camera, not a forensic-detail camera. If you need to resolve facial identification at a specific distance, review the full Axis datasheet or contact Security Australia before specifying this model for that application.

7. Does this camera have built-in two-way audio, or is that an add-on?

   Two-way audio requires an optional add-on. The AXIS P3719-PLE does not include built-in speaker and microphone as standard. Two-way audio connectivity is available via the optional AXIS T61 Audio and I/O Interface using Axis portcast technology, and a 30W midspan or higher is required for that configuration. If audio is a confirmed requirement for your installation, budget for the T61 interface and verify your power supply can meet the 30W minimum before specifying.

Downloads & Resources

No downloads available for this product.