AXIS D4100-VE Mk II Network Strobe Siren with PoE, RGB LED Light, Built-in Speaker, IP66/IK10 Outdoor Rating

Model: D4100-VE

Who This Is For

When deterrence at the moment of detection is the priority, a passive camera alone often falls short. The AXIS D4100-VE Mk II Network Strobe Siren is built for installers and security integrators who need an active response device that triggers the instant a camera or VMS detects an event - not after the fact. It suits commercial sites, industrial perimeters, car parks, school grounds, and construction yards where visible and audible warnings need to respond to verified threats automatically. Powered and networked over a single PoE cable, it connects directly into AXIS Camera Station or compatible VMS platforms, allowing event-driven triggering without additional wiring infrastructure. The IK10 and IP66 ratings confirm it handles both deliberate interference and the full range of Australian outdoor conditions without compromise.

What This Device Actually Does

Who Buys This Model

• Security Integrators: Building event-driven response systems where AXIS cameras trigger visible and audible deterrence automatically through AXIS Camera Station or compatible VMS - without running additional mains power to the device.
• Construction Site Managers: Unmanned sites after hours where a visible strobe and audible alarm triggered by perimeter camera detection discourages opportunistic theft more effectively than a silent camera recording.
• Car Park and Facility Operators: High-exposure outdoor areas where staff cannot monitor every camera feed in real time - the D4100-VE Mk II acts as the on-site physical response to a VMS-verified detection event.
• School and Institutional Facilities Teams: Campuses requiring differentiated alarm signalling - RGB colour programmability means different event types produce visually distinct strobe patterns that staff can be trained to recognise.

Honest Assessment

The D4100-VE Mk II does the specific job of network-triggered deterrence better than most alternatives in its category. IK10 and IP66 are confirmed ratings - not estimated - and the RGB strobe with integrated speaker provides a genuinely visible and audible response that passive cameras cannot deliver. PoE simplifies installation considerably in locations where mains power is inconvenient or costly. Where the device has limits: it is not a standalone alarm. Without a connected AXIS or compatible VMS system configured to trigger it, the D4100-VE Mk II does nothing autonomously. It also does not record footage, detect motion independently, or replace any camera in a surveillance system. Buyers who need an integrated detection-and-response system should plan the full camera and VMS stack alongside this device. The D4100-VE Mk II is stocked by Security Australia and suits integrators already working within the AXIS ecosystem.

Before You Buy

Quick Fit Check

• Good match if: You have an existing AXIS camera system or compatible VMS and need a network-triggered, PoE-powered outdoor deterrence device that activates on verified detection events without a separate mains power run.
• Good match if: Your installation is in an exposed outdoor location subject to both weather and potential physical interference - the confirmed IP66 and IK10 ratings mean the enclosure holds up without needing a protective housing or shelter.
• You may need a different model if: You need a standalone alarm with its own detection capability and no dependency on an external VMS - a dedicated intrusion alarm panel with integrated sensors would be more appropriate for that application.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You are working within an AXIS or ACAP-compatible VMS ecosystem and need a network-triggered outdoor deterrence device that runs on PoE and carries both IK10 and IP66 protection for exposed positions.
• You may need a different model if: You need a device with its own detection and triggering capability independent of a VMS - a standalone alarm communicator or integrated siren with built-in PIR detection would be the appropriate product type for that application.
• Pairs well with: AXIS AI-enabled fixed cameras with object classification (person/vehicle detection) to minimise false triggers, and a PoE+ managed switch with sufficient port budget for both cameras and deterrence devices on the same network infrastructure.

Common Questions

1. Does the D4100-VE Mk II work without an AXIS camera?

   Yes, with conditions. The device can be triggered by any compatible VMS platform that supports AXIS ACAP integration - it is not exclusively limited to AXIS cameras. However, it requires a network-connected system to issue the trigger command. It cannot detect, decide, or activate independently without that external signal from a VMS, camera rule engine, or compatible control platform.

2. Will this camera work outdoors in harsh Australian conditions?

   Yes. The D4100-VE Mk II carries an IP66 weather rating - confirmed protection against dust and high-pressure water ingress - and an IK10 vandal resistance rating, the highest available classification, verified at 20 joules of impact force. Both ratings confirm suitability for exposed outdoor positions including coastal environments and tropical climates subject to heavy rain.

3. What PoE standard does the D4100-VE Mk II require?

   The device is powered via PoE over a standard Cat5e or Cat6 cable. Confirm the specific PoE class requirement with the datasheet before selecting your switch or injector, as some active deterrence devices draw more power than standard IEEE 802.3af (15.4W) allows. Having the correct port budget on your PoE switch is important when adding multiple devices to an existing camera network.

4. Can the strobe and siren be programmed to trigger different colours for different alarm types?

   Yes. The RGB LED array supports configurable colour output and flash patterns, meaning different event types can produce visually distinct strobe responses. This is useful in facilities where staff need to distinguish between a perimeter intrusion trigger and a different alarm condition without reading a control panel - the visual output itself communicates the event type.

5. Does this device record footage or detect motion on its own?

   No. The D4100-VE Mk II is a response device, not a detection device. It does not capture video, store recordings, or analyse a scene independently. Its role is to produce a visible and audible deterrent output when instructed to do so by a connected camera system or VMS. Video capture and event detection remain the function of the cameras in your system.

6. Is the D4100-VE Mk II available through Security Australia for bulk or project orders?

   Yes. The AXIS D4100-VE Mk II is available through Security Australia, and the product is suited to multi-device project deployments where multiple deterrence points are required across a site. If you are planning a system with several units, check current stock levels and confirm PoE switch capacity before finalising your project bill of materials.

7. How does the built-in speaker work - can it play custom audio messages?

   Yes. The integrated speaker supports pre-recorded audio messages in addition to standard alarm tones. This allows site-specific warning messages - such as advising the intruder they have been detected and police have been contacted - to be uploaded and triggered automatically as part of the VMS event rule. The specific audio file formats supported should be confirmed in the AXIS D4100-VE Mk II datasheet before preparing your audio assets.

Downloads & Resources

No downloads available for this product.