AXIS D2110-VE Security Radar – 180° 24/7 Radar Detection with Built-in AI and Low False Alarms

Model: AXIS D2110-VE

Who This Is For

When reducing false alarms while maintaining genuine perimeter detection is the priority, the AXIS D2110-VE Security Radar is the device installers specify. This is a radar detection unit - not a camera - designed for outdoor perimeter monitoring across a 180-degree field covering up to 50 metres for humans and up to 100 metres for vehicles, around the clock, in any lighting condition and through adverse weather. The built-in AI classifies detected objects as humans, vehicles, or other moving objects before triggering an alert, which eliminates the nuisance activations that plague camera-based motion detection in wind, rain, and shifting light. Typical deployments include critical infrastructure boundaries, commercial yards, warehouses, logistics facilities, and sites where camera coverage alone cannot provide reliable after-hours detection. The D2110-VE integrates with AXIS Camera Station and third-party VMS platforms to trigger cameras, lights, or alarms on confirmed detections only.

What This Camera Actually Does

Who Buys This Model

• Critical Infrastructure Operators: Substations, water treatment facilities, and communications sites where after-hours human intrusion detection must be reliable and false alarms cannot be tolerated by monitoring centres.
• Logistics and Warehouse Security Teams: Yards and loading dock perimeters where vehicles move at night and camera-based motion detection generates constant alerts - the AI classification filters vehicles from pedestrians before any alarm is raised.
• Commercial Property Managers: Large open-air car parks, retail centre boundaries, and mixed-use developments where a single 180-degree radar unit can cover a wide frontage without the IR range limitations of fixed cameras.
• Security Integrators Building Layered Systems: Professionals pairing radar detection with PTZ cameras so that confirmed radar events automatically drive a camera to the exact intrusion point - only recording and alerting on real events.
• Industrial Sites with Challenging Lighting: Mining operations, port facilities, and manufacturing yards where floodlights, dust, steam, or heavy fog make camera-based detection unreliable during night shifts.

Honest Assessment

The AXIS D2110-VE genuinely solves the false alarm problem that undermines camera-based motion detection in outdoor environments. The combination of radar physics - unaffected by light, shadow, and weather - with on-device AI classification means monitoring centres receive alerts tied to confirmed human or vehicle presence rather than environmental noise. The 180-degree coverage arc and PoE simplicity make it straightforward to integrate into new and existing perimeter systems alongside AXIS cameras and VMS platforms.

What it will not do is provide video evidence of what triggered the detection - it is a sensor, not a camera, and must be paired with cameras if visual verification or recorded footage is required. It is also not a cost-effective solution for small residential perimeters where a standard outdoor camera with AI motion detection would cover the same ground at a fraction of the investment. For sites where false alarm reduction and all-weather detection are genuine operational requirements, the D2110-VE available through Security Australia is a considered addition to a layered security system.

Before You Buy

Quick Fit Check

• Good match if: Your site generates high false alarm rates from existing camera motion detection - the D2110-VE's built-in AI classifies humans and vehicles before triggering, cutting nuisance alerts without reducing genuine detection coverage.
• Good match if: You need 24/7 perimeter detection at a site where complete darkness, fog, or heavy rain makes camera-based detection unreliable - radar performance is unaffected by all of these conditions.
• You may need a different model if: Your primary requirement is video surveillance rather than perimeter detection - a full-colour outdoor turret or bullet camera with AI motion detection will provide both visual coverage and event-based alerts from a single device at lower system cost.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: False alarms from camera-based motion detection are creating an operational burden, or your site requires perimeter detection in conditions where cameras cannot perform reliably - complete darkness, fog, or heavy rain.
• You may need a different model if: Your primary requirement is video recording and visual evidence rather than perimeter detection - an outdoor AI bullet or turret camera will provide both image capture and event-based motion detection from a single unit at lower cost.
• Pairs well with: PTZ cameras for auto-directed visual verification on radar events, or full-colour outdoor fixed cameras positioned to cover the zones the radar detects within.

Common Questions

1. Does the AXIS D2110-VE record video footage?

   No. The D2110-VE is a radar detection sensor and produces no video output of any kind. It detects and classifies moving objects within its coverage zone and outputs event data - position, classification, and movement direction - to a connected VMS or camera system. For recorded footage, a camera must be part of the system and configured to record when the radar triggers an event.

2. Will this radar work in complete darkness?

   Yes, fully. Radar transmits and receives its own radio frequency signal, so ambient light level has no bearing on detection performance. The D2110-VE detects and classifies humans and vehicles with identical accuracy at 2am in a fully unlit environment as it does during daylight hours - unlike IR cameras, which have a finite IR illumination range that varies with lens and sensor sensitivity.

3. What does the built-in AI actually classify - and does it reduce false alarms?

   Yes, materially. The on-device AI classifies detected movement into humans, vehicles, and other moving objects before any alert is sent. Standard camera motion detection triggers on any pixel change - wind in trees, rain on a lens, a passing car's headlight sweep. The D2110-VE only raises an alert after classification confirms a human or vehicle is present, which is the primary reason integrators specify it for sites with chronic false alarm problems.

4. Does the D2110-VE require PoE+ or standard PoE?

   Standard IEEE 802.3af PoE is sufficient. The D2110-VE does not require the higher wattage PoE+ (802.3at) specification, so it can be powered directly from a standard PoE switch port or PoE injector without upgrading switching infrastructure. A single Cat5e or Cat6 cable run to the mounting point carries both power and network data.

5. Will this radar work with my existing VMS - not just AXIS Camera Station?

   It depends on your VMS. The D2110-VE integrates natively with AXIS Camera Station and supports third-party VMS platforms via AXIS Camera Application Platform (ACAP) and the AXIS event API. Many leading VMS platforms have native AXIS radar integration, but you should confirm compatibility with your specific platform version before purchasing. The team at Security Australia can advise on integration pathways for common VMS platforms used in the Australian market.

6. How does mounting height affect the D2110-VE's detection range?

   Mounting height directly influences both detection range and close-range ground coverage. AXIS specifies recommended mounting heights and tilt angles for the D2110-VE to achieve published range figures. Mounting the unit too high with insufficient downward tilt creates a dead zone directly beneath the unit; too low reduces the usable range across the coverage arc. Follow AXIS installation guidelines during the design phase - adjusting tilt on site after cabling is in place is difficult and often results in compromised performance.

7. Does the D2110-VE detect through walls or fences?

   No. The D2110-VE radar does not penetrate solid walls or dense materials. Chain-link fences with wide mesh spacing may allow detection through the fence, but solid timber, brick, or sheet metal fencing will block the radar signal. Position the unit to have a clear line of sight across the coverage arc - obstructions within the 180-degree sweep will create detection shadows behind them.

Downloads & Resources

No downloads available for this product.