6MP 4CH Hikvision CCTV Kit: 2 x EXIR Bullet Cameras with Acusense + 4CH NVR

Model: DS-2CD2T66G2-4I / DS-7604NI-I1-4P

Who This Is For

For small business owners and residential installers who need a structured, plug-and-play starting point without compromising on camera intelligence. This 6MP 4-channel Hikvision AcuSense kit pairs 2 outdoor EXIR bullet cameras with a dedicated 4-channel NVR, giving buyers a matched system that arrives ready to configure. The DS-2CD2T66G2 cameras cover long outdoor approaches - driveways, car parks, loading areas, rear lanes - with 80m infrared reach and AcuSense Gen 2 classification that filters human and vehicle detections away from trees, animals, and lighting changes. The DS-7604NI-I1-4P NVR provides built-in PoE ports, meaning each camera runs on a single Cat5e or Cat6 cable with no separate power supply needed. Two channels remain open for future expansion. Suited to small retail premises, residential properties, warehouses, and light industrial sites where an accountable, expandable 6MP system is the priority.

What This System Actually Does

Who Buys This Model

• Small retail and hospitality owners: Installing 2 cameras covering a front entrance and rear car park, using AcuSense to filter overnight alerts down to genuine human or vehicle detections rather than every motion event.
• Residential property owners: Covering a front driveway and side gate with 80m bullet cameras, running a single cable back to an NVR inside the garage or utility room using the integrated PoE ports.
• Light industrial and warehouse operators: Mounting cameras on eaves or fascia boards to watch loading dock approaches and perimeter fencelines, where the -40°C to +60°C operating range handles exposure to Australian summer and alpine conditions equally.
• Installers scoping a starter system with room to grow: The 4-channel NVR has 2 free PoE ports after this kit is installed, allowing 2 additional cameras to be added later without replacing the recorder.

Honest Assessment

This kit delivers genuine value at the 6MP level - AcuSense Gen 2 classification on both cameras is a practical upgrade over motion-only detection, and 80m EXIR reach handles the longer approach distances that dome cameras cannot. The single-cable PoE installation is straightforward, and H.265+ keeps storage consumption manageable on the NVR's single SATA bay. The 2.8mm fixed lens is wide enough for entries and open spaces, but buyers needing to reach a specific narrow corridor or distant focal point will want a varifocal lens option instead. This kit does not include a hard drive - storage needs to be sourced separately and sized based on expected retention period and H.265+ bitrate. For sites needing more than 4 cameras total, or requiring PTZ coverage of large open areas, a higher-channel NVR and a PTZ camera would serve the application better. Available through Security Australia, this kit suits buyers committing to a matched Hikvision ecosystem from the start.

Complete Package Contents

• 2 x Hikvision DS-2CD2T66G2-4I - 6MP AcuSense Gen 2 EXIR Bullet Camera, 2.8mm fixed lens, 80m IR, IP67, PoE (802.3af) / 12VDC
• 1 x Hikvision DS-7604NI-I1-4P - 4-channel NVR, 4-port built-in PoE switch, 1 SATA bay (HDD not included)

Before You Buy

Quick Fit Check

• Good match if: You are covering 2 outdoor locations - driveway, entry gate, rear lane, loading bay - and want AcuSense classification on both cameras to reduce nuisance alerts overnight without setting up complex zones manually.
• Good match if: Your install runs cable back to a single location and you want a tidy PoE setup - the NVR's built-in PoE ports mean both cameras power and record through the same device with no extra switching hardware at the camera end.
• You may need a different model if: Your site requires more than 4 camera positions now or in the near future - a higher-channel PoE NVR kit will be more cost-effective than expanding this system beyond its 4-port capacity.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need a matched 6MP outdoor bullet system with AcuSense intelligence and PoE simplicity out of the box, and your location count sits at 2-4 cameras total.
• You may need a different model if: Your site requires 6, 8, or more camera positions - a higher-channel NVR kit will provide better long-term value and avoid the cost of a mid-project recorder upgrade.
• Pairs well with: A surveillance-grade 2TB or 4TB SATA hard drive installed in the NVR bay, and Cat5e or Cat6 cable for each camera run up to 100m.

Common Questions

1. Does this kit include a hard drive?

   No. The DS-7604NI-I1-4P NVR has a single SATA bay but ships without a drive. You will need to purchase a surveillance-rated HDD separately. For 2 x 6MP cameras recording continuously at H.265+, a 2TB drive provides roughly 15-20 days of retention - size up if you plan to add more cameras or need longer playback history.

2. Will the cameras work if the NVR loses power?

   Yes, partially. Each DS-2CD2T66G2 camera supports a microSD card up to 128GB for local edge recording. If the NVR goes offline, the cameras can continue recording to their own card and sync footage back when the NVR reconnects. The microSD cards are not included and need to be installed separately.

3. How does AcuSense Gen 2 reduce false alerts in practice?

   The camera's onboard processor classifies detected movement into human, vehicle, or other categories before triggering an alert or recording event. A cat crossing the driveway, a tree moving in wind, or headlights sweeping across a wall will not generate a notification. Only confirmed human or vehicle detections do. This classification happens at the camera, not the NVR, so it works even when the microSD fallback is active.

4. Can I add more cameras to this system later?

   Yes, up to 4 cameras total. The DS-7604NI-I1-4P has 4 PoE ports and supports 4 channels. This kit uses 2 ports, leaving 2 free for additional Hikvision IP cameras. If you anticipate needing more than 4 cameras, plan for a larger NVR from the outset - the recorder cannot be expanded beyond 4 channels. The team at Security Australia can advise on the right NVR channel count for your site.

5. Does this system support remote viewing on a phone?

   Yes. The DS-7604NI-I1-4P NVR is compatible with Hikvision's Hik-Connect platform, which allows live viewing and playback from a mobile app. Remote access requires the NVR to have a stable internet connection and network configuration completed during setup. Port forwarding or Hik-Connect cloud relay are both supported options.

6. Will this camera handle direct summer sun or coastal salt air?

   Yes on both counts. The IP67 rating confirms full protection against dust ingress and water immersion to 1 metre for 30 minutes - more than sufficient for coastal rain and sea spray. The operating temperature range of -40°C to +60°C covers Australian summer conditions, including cameras mounted against north-facing walls or rooflines exposed to direct afternoon sun.

7. What cable is needed between the cameras and the NVR?

   Standard Cat5e or Cat6 cable carries both PoE power and video data from each camera back to the NVR. Maximum cable run is 100m per camera under IEEE 802.3af PoE standards. Each camera requires its own dedicated cable run back to the NVR - daisy-chaining between cameras is not supported. No separate power cabling or power adaptors are required at the camera end.

Cabling Considerations

• Cable Type: Cat5e minimum, Cat6 recommended for runs approaching 80-100m or in environments with high EMI (near machinery or switchboards).
• Max Cable Run: 100m per camera from NVR PoE port to camera under IEEE 802.3af. Runs beyond 100m require a PoE extender or mid-span injector.
• PoE Notes: Both cameras operate on IEEE 802.3af (15.4W maximum per port). The DS-7604NI-I1-4P's built-in PoE switch handles this directly - no external PoE switch or injector needed for a 2-camera setup.
• Wiring Tips: Run each camera cable independently back to the NVR rather than joining runs in a junction box. Use outdoor-rated UV-stable Cat6 for any exposed roof or wall runs. Seal cable entry points at the camera bracket with self-amalgamating tape to maintain IP67 integrity at the mounting point.

Downloads & Resources

No downloads available for this product.