What’s the process for logging into the AX PRO wireless control panel via a browser?

Into the AX PRO Wireless Control Panel via Browser

Accessing your AX PRO Wireless Control Panel through a web browser is essential for configuration and management. Follow these straightforward steps to log in:

Step-by-Step Instructions

1. Open a Web Browser:

   • Launch your preferred web browser (such as Chrome, Firefox, or Edge) on a computer that is connected to the same network as your AX PRO panel.

2. Enter the IP Address:

   • In the address bar, type in the IP address of your AX PRO Wireless Control Panel. This is typically something like http://192.168.1.1 or the specific IP address you assigned during setup.

3. Access the Login Page:

   • Press Enter to navigate to the login page of the control panel.

4. Input Your Credentials:

   • Enter the administrator username and password. The default username is usually admin, and the default password is often 12345 or the one you’ve set during installation.

5. Click Login:

   • After entering your credentials, click the Login button to access the control panel interface.

6. Configure Settings:

   • Once logged in, you can begin configuring your settings, monitoring the system, or updating configurations as needed.
     
     How to Login AX PRO Wireless Control Panel by Browser

Conclusion

By following these steps, you can easily log into your AX PRO Wireless Control Panel via a web browser, allowing you to manage your security system effectively.

For further information and detailed guidance, refer to the official Hikvision User Manual. This manual provides comprehensive details on all functionalities and features of your AX PRO system.

If you have any questions or require additional assistance, feel free to reach out!