How do I add a wireless detector to the AX PRO system?

a Wireless Detector to AX PRO Wireless Control Panel

Integrating a wireless detector into your Hikvision AX PRO Wireless Control Panel enhances your security system by providing additional detection capabilities. Follow these steps to add a wireless detector to your system:

Step-by-Step Instructions

  1. Access the AX PRO Control Panel:

    • Log into your AX PRO Wireless Control Panel using a web browser or through the dedicated app.

  2. Navigate to Device Management:

    • Once logged in, click on the Configuration tab in the main menu.
    • Select Device Management to manage connected devices.

  3. Add the Wireless Detector:

    • Click on Add Device or the corresponding option to include a new device in your system.
    • Set the device type to Wireless Detector.

  4. Put the Detector in Pairing Mode:

    • Refer to the manual for your specific wireless detector model to initiate the pairing mode. This usually involves pressing a button on the detector.

  5. Detect the Device:

    • In the AX PRO Control Panel, the system should detect the wireless detector in pairing mode.
    • Follow the prompts to add the detector to the system.

  6. Configure Settings:

    • Once added, configure any necessary settings for the detector, such as sensitivity levels and alarm notifications.

  7. Save the Configuration:

    • Click Save or Apply to confirm your settings and ensure that the detector is part of your monitoring system.

  8. Test the Detector:

Conclusion

By following these steps, you can successfully add a wireless detector to your Hikvision AX PRO Wireless Control Panel. This addition will enhance your overall security setup with improved detection capabilities.

For more detailed instructions and support, refer to the official Hikvision User Manual, which provides comprehensive guidance on device management and configurations.

If you have any further questions or need assistance, feel free to reach out!

Leave a comment

Back to blog