How do I disable the low-light LED on a Dahua camera?

Turning Off the Low Light LED on Your Dahua Camera

To disable the low light LED illuminator on your Dahua camera, follow these step-by-step instructions:

Step-by-Step Instructions

  1. Download and Install ConfigTool:

    • First, download the ConfigTool from the following link: Download ConfigTool. This tool will help you locate the IP address of your camera and NVR.

  2. Access the Camera through a Web Browser:

    • Enter the IP address of your camera into a web browser. Make sure the PC you are using is connected to the same network as the NVR.
    • Log in using your credentials to access the system.

  3. Find the Camera Settings:

    • After logging in, navigate to Settings and then go to Camera List.
    • Click on the webpage link for the camera you wish to configure. This will open the camera's web interface.

  4. Adjust the Illuminator Settings:

    • In the camera's web interface, look for the option to control the illuminator mode.
    • Change the illuminator mode to Off to disable the low light LED.


Conclusion

By following these steps, you can easily turn off the low light LED on your Dahua camera, allowing for a more discreet surveillance setup when necessary.

If you have any further questions or need assistance, please feel free to reach out!

Leave a comment

Back to blog