• Home
  • *SpOrd* Hanwha Wisenet SBV-158G Back Box to suit PNV-9080R & XNV-x080x Camera Series
  • SBV-158G
  • Sku: SBV-158G
  • Vendor: SecurityAustralia

*SpOrd* Hanwha Wisenet SBV-158G Back Box to suit PNV-9080R & XNV-x080x Camera Series

$83.49 AUD
Tax included.
Shipping calculated at checkout.

Free shipping - Enjoy free shipping when your order exceeds $100!

All orders are despatched within the next business day!

Best local support in Aus! We back all products with a 3 year manufacturer warranty.

Designed for surface-mounting Hanwha Wisenet outdoor dome cameras, the SBV-158G is a manufacturer-matched back box built to suit the PNV-9080R and XNV-x080x camera series. It provides an internal cavity to route and conceal cabling behind the camera, keeping the mounting point tidy without exposed cables at the wall face. The weatherproof construction resists water and dust ingress, making it suited to outdoor applications where ongoing environmental exposure is a factor. Paired with the vandal-resistant dome cameras it supports, the SBV-158G reinforces the overall mounting assembly and limits access to cables and fixings from below.

Who This Is For: Security installers and integrators mounting Hanwha Wisenet PNV-9080R or XNV-x080x series dome cameras on exterior walls, eaves, or soffits where a manufacturer-matched back box with internal cable management is needed for a clean, weatherproof surface-mount result.

Weatherproof Construction Manufacturer-Matched Fit Internal Cable Management Tamper-Resistant Design Surface-Mount Back Box Special Order Item

Quick Fit Check

  • Good match if: You are installing a confirmed compatible Hanwha Wisenet dome camera - such as the PNV-9080R, XNV-8080R, or XNV-6080R - on a brick, rendered, or timber exterior surface where concealing cabling inside the wall is not practical and a tidy surface-mount result is required.
  • Good match if: You are expanding an existing site already running compatible Hanwha Wisenet dome cameras and need back boxes that match the manufacturer specification of the installed system.
  • You may need a different model if: Your camera model is not on the confirmed compatibility list - in that case, a back box or mounting bracket specified for your particular camera series will be required, as mounting patterns and cable entry configurations differ across the Hanwha Wisenet range.

Downloads & Resources

Product Spec Sheet (PDF)  

Specifications

Company Contact Country
Alfreds Futterkiste Maria Anders Germany
Centro comercial Moctezuma Francisco Chang Mexico
Ernst Handel Roland Mendel Austria
Island Trading Helen Bennett UK
Laughing Bacchus Winecellars Yoshi Tannamuri Canada
Magazzini Alimentari Riuniti Giovanni Rovelli Italy

Documentation

3 Years Manufacturer Warranty

All IP cameras and recording devices (NVR’s/DVR’s) are covered by a 3 year back-to-base manufacturer warranty.

Our warranty is limited to the replacement of faulty items or parts and does not include damage due to incorrect fitting of parts or accessories, or damage due to mishandling the equipment once out of the box. All faults are sent to the manufacturer for inspection and diagnosis before a replacement is sent out.

Read more about the Terms & Conditions here – https://www.securityaustralia.com.au/terms-and-conditions/

Trusted Brand Partner & Security Equipment Wholesaler

Authorised Brand Partner with Responsive & Fast Aussie Sales Support Team ★★★★★
Best After-Sales Support and Troubleshooting Team with Years of Installation Experience.

Free Delivery* & Despatch Time

*Just spend over $100 to activate Fast Free Shipping!

Despatch Times: Products are despatched on the same day if the order was placed before 11am on any weekday, Monday - Friday. All other orders are processed and despatched within 24 hours or next business day.

Order Confirmation: Once you place an order, you will receive a confirmation email. This indicates that your order has been received in our system and is now being processed for dispatch. If your item is back-ordered or unavailable, we will notify you via email, and if we do not receive a response, we will attempt to contact you by phone as soon as possible. We value your time and strive to be prompt. If your item(s) are available for immediate shipment (within 2 days), we will process the charges and prepare the order for shipping.

Shipping Times: General shipping times for StarTrack, TNT and Allied couriers are between 1-3 working days from despatch. Longer delivery times may be caused by your package being held at your local courier depot that is beyond our control. Please contact us or the local post depot for confirmation.

Tracking Numbers: all tracking numbers will be emailed to you by our warehouse processing team within the day, after your order is despatched to our local courier.

View full details

*SpOrd* Hanwha Wisenet SBV-158G Back Box to suit PNV-9080R & XNV-x080x Camera Series

$83.49 AUD

Model: SBV-158G

Who This Is For

Installers working on surface-mount deployments of Hanwha Wisenet outdoor dome cameras will find the SBV-158G a purpose-built back box for the PNV-9080R and XNV-x080x series. When chasing conduit into a wall is not practical - whether the surface is rendered brick, timber cladding, or a concrete soffit - this back box provides an internal cavity to route and conceal cabling behind the camera rather than leaving it exposed at the mounting point. It is designed to complement the vandal-resistant characteristics of the compatible camera series, protecting the cable entry and fixing points from both environmental exposure and tampering. If you are specifying a compatible Hanwha Wisenet dome camera and need a manufacturer-matched surface-mount result, the SBV-158G is the correct OEM accessory for that job rather than an improvised third-party alternative.

What This Back Box Actually Does

Manufacturer-Matched Fit

Engineered specifically for the Hanwha Wisenet PNV-9080R and XNV-x080x dome camera series, the SBV-158G ensures correct alignment with the camera's mounting footprint. No improvised adapters, no gaps at the wall face - the assembly sits flush and properly registered against the mounting surface as the manufacturer intended.

Internal Cable Management

The internal cavity provides dedicated space to route and manage cabling directly behind the camera. This prevents network or power cables from being exposed at the wall face, reduces cable strain at the connector, and eliminates weather exposure at the entry point - relevant wherever surface cabling is unavoidable.

Weatherproof Construction

Built to resist water and dust ingress at the mounting point, the SBV-158G is suited to outdoor surface-mount applications where rain, moisture, and airborne debris are ongoing conditions. The sealed design keeps the cabling and connection area behind the camera protected from the elements throughout the product's service life.

Tamper-Resistant Mounting Support

Paired with the vandal-resistant dome cameras it supports, the SBV-158G reinforces the overall mounting assembly against interference. The back box limits access to cable runs and fixing points from below, complementing the camera's own vandal-resistant housing and adding an extra layer of protection at the wall interface.

Who Buys This Model

  • Security installers completing Hanwha Wisenet dome deployments: Technicians who have specified a PNV-9080R or XNV-x080x series camera for a surface-mount application and need the correct OEM back box to finish the installation to manufacturer standards without sourcing a third-party alternative.
  • Integrators retrofitting cameras onto rendered or brick exteriors: Where cutting into walls or concealing cable in conduit is not practical, this back box delivers a tidy surface-mount result with internal cable routing rather than exposed wiring running down the wall face.
  • Facilities managers maintaining existing Hanwha Wisenet systems: Sites already running compatible Hanwha Wisenet dome cameras that need to replace a damaged back box or add new camera positions while keeping the hardware consistent with the existing installed system.
  • Installers working on carpark, loading dock, or perimeter structures: High-tamper-risk outdoor locations where a manufacturer-matched back box is specified as part of the mounting assembly to protect cable access points in addition to the camera's own vandal-resistant housing.

Honest Assessment

The SBV-158G does one thing well: it provides a manufacturer-matched, weatherproof surface-mount solution for a defined range of Hanwha Wisenet outdoor dome cameras. Using the correct OEM back box avoids the compromises that come with generic third-party mounts, particularly around sealing integrity, mounting pattern alignment, and cable entry positioning. The internal cable management cavity is a practical benefit wherever surface cabling is unavoidable and a clean installation result is required. This product is a special order item available through Security Australia, so lead time must be confirmed before locking in an installation date - it is not typically held in stock. It will not suit cameras outside the confirmed compatibility list, and it is not a universal dome mount. If your camera model is not on the compatibility list, a different mounting accessory specific to your camera series is required. Treat this as a model-specific accessory when preparing your bill of materials.

Before You Buy

Installer Note: The SBV-158G is a special order product - confirm availability and lead time with your supplier before scheduling the installation date. Verify your exact camera model against the confirmed compatibility list (PNV-9080R, XNV-6080, XNV-6080R, XNV-6085, XNV-6120R, XNV-8080R, XNV-L6080, XNV-L6080R, SNV-5084, SNV-5084R, SNV-6084, SNV-6084R, SNV-7084, SNV-7084R, SNV-8080, SNV-8081R, SNV-6085R) before ordering. Camera models outside this list are not confirmed as compatible - mounting footprints and cable entry configurations differ between Hanwha Wisenet series, and an incorrect back box will not align correctly with the camera base.

Cable Entry Planning: Before fixing the SBV-158G to the mounting surface, confirm where the cable exits from the wall or structure. The internal cavity is designed to accommodate the cable run behind the camera, but the entry point on your surface needs to align with the back box opening. Planning the cable exit position before drilling avoids having to reposition after the box is fixed in place.

Key Features & Technical Specifications

Model
SBV-158G
Type
Surface-mount back box for outdoor dome cameras
Brand
Hanwha Wisenet
Construction
Weatherproof - water and dust ingress resistant
Cable Management
Internal cavity for cable routing and management behind the camera
Tamper Resistance
Designed to complement vandal-resistant camera housings; limits access to cable and fixing points
Compatible Camera Models
PNV-9080R, XNV-6080, XNV-6080R, XNV-6085, XNV-6120R, XNV-8080R, XNV-L6080, XNV-L6080R, SNV-5084, SNV-5084R, SNV-6084, SNV-6084R, SNV-7084, SNV-7084R, SNV-8080, SNV-8081R, SNV-6085R
Mount Type
Surface mount - suitable for wall, ceiling, soffit, or eave applications
Availability
Special order - confirm lead time before purchasing

Real-World Scenarios

Brick Exterior - No Conduit Option

Installing an XNV-8080R on a rendered brick wall where chasing in conduit is not an option. The SBV-158G internal cavity routes and conceals the PoE cable behind the camera, keeping the wall face tidy without exposed cabling running down the surface to the camera base.

Timber Eave or Soffit Mount

Mounting a PNV-9080R under a timber eave where drilling through the structure is impractical. The back box's weatherproof construction handles continuous outdoor exposure while keeping the cable entry point sealed against rain and moisture that would otherwise reach the connection area directly.

Carpark Entry - High Tamper Risk

Positioning an SNV-7084R at a carpark entry point where cable accessibility is a known concern. The SBV-158G reinforces the mounting assembly and limits access to the cable and fixing points from below, working alongside the camera's own vandal-resistant dome housing to harden the overall installation.

System Expansion on an Existing Site

A facility already running XNV-6080R cameras adds 2 new camera positions. Ordering the SBV-158G alongside the cameras ensures all mounting hardware matches the existing installed system - consistent appearance, consistent sealing, and no mismatched mounting hardware at the new positions.

Concrete Column or Pillar Mount

Fixing an XNV-6120R to a concrete column at a warehouse perimeter where the cable runs along the surface rather than through the structure. The back box provides a clean cable transition point at the camera base, avoiding the untidy result of a cable exiting freely from behind an unsupported camera mount.

How It Compares

  • Choose this if: You are installing a confirmed compatible Hanwha Wisenet dome camera in a surface-mount application and need a manufacturer-matched back box with internal cable management and weatherproof construction at the mounting point.
  • You may need a different model if: Your camera is not on the confirmed compatibility list - mounting footprints and cable entry configurations differ between Hanwha Wisenet series, so a back box or mounting bracket matched to your specific camera model is required instead.
  • Pairs well with: A Hanwha Wisenet outdoor dome camera from the confirmed compatible series, ordered at the same time so the complete mounting assembly is available before the installation date is locked in.

Common Questions

  1. Which camera models is the SBV-158G confirmed compatible with?
    The confirmed compatible models are: PNV-9080R, XNV-6080, XNV-6080R, XNV-6085, XNV-6120R, XNV-8080R, XNV-L6080, XNV-L6080R, SNV-5084, SNV-5084R, SNV-6084, SNV-6084R, SNV-7084, SNV-7084R, SNV-8080, SNV-8081R, and SNV-6085R. If your camera is not on this list, do not assume compatibility - mounting footprints vary between Hanwha Wisenet camera series and an incorrect back box will not align with the camera base.
  2. Does this work for outdoor installations exposed to rain and weather?
    Yes. The SBV-158G is built with a weatherproof construction designed to resist water and dust ingress at the mounting point. It is intended for use with outdoor-rated vandal-resistant dome cameras from the compatible series. The sealed design keeps the cable entry area and connections behind the camera protected from ongoing environmental exposure in typical Australian outdoor conditions.
  3. Does the SBV-158G work for both wall and ceiling mount applications?
    Yes. The SBV-158G is a surface-mount back box that can be fixed to any flat surface - wall, ceiling, soffit, or eave - depending on your installation requirements. The back box itself does not dictate the camera's viewing angle; that is set by the camera and its adjustable mount. Confirm the cable entry position on your surface aligns with the back box opening before drilling the mounting holes.
  4. Is the SBV-158G in stock or is it a special order item?
    The SBV-158G is listed as a special order product, meaning it is not typically held in stock and must be ordered in specifically. Confirm lead time with Security Australia before scheduling your installation date - ordering this accessory at the same time as the camera will help ensure both arrive together and avoid delays on site.
  5. Does this work for the XNV-8080R specifically?
    Yes, the XNV-8080R is on the confirmed compatibility list for the SBV-158G. If you are deploying the XNV-8080R in a surface-mount application and need a manufacturer-matched back box with internal cable management at the mounting point, the SBV-158G is the correct OEM accessory for that installation.
  6. Will this back box work with a generic or third-party dome camera?
    No. The SBV-158G is engineered to match the specific mounting footprint and cable entry configuration of confirmed compatible Hanwha Wisenet models. It is not a universal dome back box and will not align correctly with cameras outside the confirmed compatibility list. Using it with an unconfirmed model risks gaps at the mounting surface, misaligned fixings, and compromised weatherproofing at the cable entry point.

Downloads & Resources

Recently viewed products

SECURITY AUSTRALIA - YOUR TRUSTED SOURCE FOR SECURITY EQUIPMENT

Discover our wide range of security equipment designed to keep you safe and secure.

We offer competitive prices to trades and commercial projects. Speak to one of our experienced consultants if you require a custom quote on larger orders.

REQUEST A QUOTE OR SEND US AN ENQUIRY