Hikvision DS-2TXS2628-10P/QA/GLT/CH30S80-KIT Solar-powered Thermal Camera Kit (30AH vBattery)

Model: DS-2TXS2628-10P/QA/GLT/CH30S80

Who This Is For

When getting power and data to a camera location simply is not possible, the DS-2TXS2628-10P/QA/GLT/CH30S80 kit is built for exactly that situation. This is a solar-powered thermal camera system designed for remote outdoor monitoring where there is no grid power, no fixed cabling, and no tolerance for missed detections after dark or in poor visibility. The 80W photovoltaic panel and 30Ah lithium battery keep it running around the clock, while the thermal sensor detects humans and vehicles out to 300m regardless of lighting conditions. 4G connectivity handles data transmission via a SIM card slot, making it suited to mining lease perimeters, rural properties, water treatment sites, construction compounds, and any location where a conventional wired camera installation is not practical. The built-in temperature exception alarm and fire detection capability extend its value beyond intrusion detection into early-warning fire monitoring for high-risk outdoor environments.

What This System Actually Does

Who Buys This Model

• Mining and Resources Site Managers: Monitoring access roads, equipment yards, and lease perimeters at remote sites where trenching for cabled infrastructure is not economically viable and 4G coverage is available.
• Rural and Agricultural Property Owners: Protecting large paddock perimeters, water infrastructure, and machinery sheds at locations kilometres from the nearest power source, using 4G transmission to deliver alerts directly to a mobile device.
• Utilities and Infrastructure Operators: Deploying at substations, water treatment plants, pipeline corridors, and communications tower sites where fire risk monitoring and perimeter intrusion detection are both required from a single unit.
• Construction Project Security Teams: Securing temporary compounds and material storage areas on active sites before permanent electrical infrastructure is installed, then relocating the kit as the project progresses.
• Fire and Land Management Agencies: Early-warning monitoring of high fire-risk terrain during elevated danger periods, using the temperature exception alarm to detect heat anomalies before a fire develops into a visible flame front.

Honest Assessment

This kit is genuinely well-suited to the problem it solves: long-range detection in locations where conventional cabled cameras cannot be deployed. The NETD rating of 40mK or better means the sensor is sensitive enough to distinguish small heat differentials at distance, and the AI classification meaningfully reduces nuisance alarms in open rural environments where standard motion detection becomes unmanageable. The -40°C to 70°C operating range makes it viable in Australian conditions from alpine to desert. The 30Ah battery paired with an 80W panel is designed for continuous operation, though actual runtime between full charge cycles will depend on solar hours at the specific deployment latitude.

What it will not do is provide the colour detail, facial visibility, or plate recognition that an optical camera delivers - thermal imaging identifies presence and heat anomalies, not identities. Sites requiring licence plate capture or facial identification should also deploy an optical camera alongside this unit. The 256x192 sensor resolution and 18x13.5-degree FOV suit long-range narrow corridor monitoring rather than wide-area coverage; multiple units are needed for broad perimeter applications. Available through Security Australia for projects requiring off-grid thermal detection.

Before You Buy

Quick Fit Check

• Good match if: You need to monitor a remote site boundary, access road, or high fire-risk zone where there is no grid power, no fixed data network, and 4G coverage is available - the solar power system and built-in SIM slot make this a genuinely self-contained deployment.
• Good match if: Your site requires both intrusion detection and fire or temperature anomaly alerting from a single unit - the -20°C to 150°C temperature exception alarm with point, line, and area measurement covers both requirements simultaneously.
• You may need a different model if: Your primary requirement is visual identification of individuals or vehicle plates - thermal imaging detects presence and heat signatures but cannot provide the optical detail needed for identification purposes; a wired or PoE optical camera system would be more appropriate for that application.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: Your site has no grid power, no fixed network, and requires detection at distance in any lighting condition - the combination of solar power, 4G, and 300m thermal detection range addresses all three constraints simultaneously.
• You may need a different model if: You need identification-quality footage of faces or licence plates - a wired or PoE optical camera system with sufficient resolution and IR range would be more appropriate, potentially deployed alongside this unit to provide both detection and identification capability.
• Pairs well with: A wired or solar-powered optical IP camera positioned at the point of likely entry to provide identification-quality footage once the thermal camera has triggered an initial detection alert.

Common Questions

1. Will this camera work through complete darkness with no external lighting?

   Yes. Thermal cameras detect heat energy emitted by objects rather than reflected visible light, so complete darkness has no effect on detection performance. The 256x192 sensor reads heat signatures at up to 300m regardless of ambient light levels - there is no IR illuminator to wash out, no need for lighting infrastructure, and no degradation in detection range after dark compared to daylight operation.

2. Does this camera work for detecting people versus animals to reduce false alarms?

   Yes. The deep learning analytics classify detected targets as human or vehicle specifically, which is the primary mechanism for reducing false alarms in open rural or semi-rural environments. Standard motion detection triggers on any change in the scene including wildlife, livestock, and wind-blown vegetation; the AI classification on this unit filters those events out and only generates an alert for confirmed human or vehicle detection.

3. How long will the battery last if there is no sun for several consecutive days?

   The 30Ah lithium battery provides a reserve capacity buffer, but continuous operation under sustained cloud cover will draw down that reserve over time. The actual duration without solar recharge depends on the camera's active transmit rate, 4G data usage, and whether alert outputs are triggering frequently. Deployments in lower-solar-hours regions or during winter in southern Australia should account for reduced daily solar generation when assessing whether the panel size is adequate for the site's monitoring load.

4. What does the NETD rating of 40mK actually mean in practice?

   NETD (Noise Equivalent Temperature Difference) of 40mK means the sensor can distinguish temperature differences as small as 0.04°C. A lower NETD value means the sensor is more sensitive to subtle thermal variations. At 40mK, this camera can detect a person or vehicle at the limits of its 300m range even when the temperature contrast between the target and background is relatively small - for example, a person walking across warm ground on a hot day where the difference in heat signature is modest rather than stark.

5. What are the detection, observation, recognition, and identification distances for this thermal sensor?

   The confirmed detection range published for this camera is up to 300m for human or vehicle detection. Thermal imaging follows the Johnson Criteria for DORI-equivalent distance grading: detection (presence confirmed), observation (movement direction), recognition (person versus vehicle type), and identification (individual features). On a 256x192 sensor with a 25mm lens and 18x13.5-degree FOV, the 300m figure represents detection range - recognition and identification occur at progressively shorter distances. Hikvision's published sensor data should be consulted for precise DORI distances for this specific sensor and lens combination, which the Security Australia team can assist with for project specification requirements.

6. Does the temperature exception alarm work for fire detection specifically?

   Yes. The temperature exception alarm monitors for readings that exceed operator-defined thresholds within the -20°C to 150°C measurement range. Fire detection algorithms incorporated in the camera are designed to identify heat anomalies consistent with ignition events. Point, line, and area measurement modes allow operators to define precisely which zones within the frame trigger an alert, so a specific area of vegetation, equipment, or ground surface can be continuously monitored for rising temperature independent of the intrusion detection function.

7. Does this camera record footage locally as well as transmitting via 4G?

   The product specifications confirm support for connection to HCP and HCC platforms for video uploading and playback via the 4G network. Local storage capability is not confirmed in the available specification data - confirm this requirement with the supplier before purchase if on-device SD card recording is needed as a backup to cloud or platform storage.

Downloads & Resources

No downloads available for this product.