Hikvision DS-2CD5A26G0-IZS 2MP Outdoor Darkfighter Bullet Camera, IR, VCA, 60fps, 2.8-12mm

Model: DS-2CD5A26G0-IZS-2.8-12mm

Who This Is For

Property managers specifying cameras for long outdoor approaches, perimeter fencing, car parks, and loading areas will find the DS-2CD5A26G0-IZS built for exactly that brief. This is an enterprise-grade outdoor bullet camera with a 2.8-12mm motorised varifocal lens, 100m IR range, and Hikvision's DarkFighter low-light imaging - a combination designed for sites where distances are long, lighting is unpredictable, and the camera position is fixed from commissioning. The motorised lens means the installer can dial in the field of view remotely without repositioning the housing, which matters when the camera is mounted high on a pole or factory wall. With a 1/1.8-inch sensor pushing 1080p at 60fps, IK10 and IP67 ratings, and an operating range of -40°C to +60°C, this camera suits industrial sites, commercial yards, warehouses, and any outdoor installation where consistent performance across seasons is a hard requirement.

What This Camera Actually Does

Who Buys This Model

• Industrial Facility Managers: Warehouses, manufacturing yards, and logistics sites where long perimeter distances and extreme temperature swings (-40°C to +60°C) rule out lower-rated cameras.
• Commercial Security Installers: Specifying enterprise-grade cameras for clients who need motorised lens adjustment on elevated pole or wall mounts without returning to site for physical refocus.
• Car Park and Precinct Operators: Sites with high ambient light variation - open-air or partially covered car parks where 140dB WDR is needed to resolve plates and faces against harsh backlighting.
• Councils and Infrastructure Operators: Outdoor public spaces, transport depots, and utility sites where IK10 vandal resistance and year-round weatherproofing are specified requirements, not options.

Honest Assessment

The DS-2CD5A26G0-IZS genuinely delivers on long-range outdoor coverage. The combination of a 1/1.8-inch DarkFighter sensor, 100m IR, 140dB WDR, and a motorised 2.8-12mm lens is a specification set that stands above entry-level and mid-range bullet cameras. The IK10 rating is real certification, not marketing language, and the -40°C to +60°C operating range covers the harshest Australian conditions without qualification. Onboard VCA analytics add genuine operational value without requiring a separate analytics server. Where this camera is not the right tool: if your priority is wide-area situational overview across a large open space, a PTZ or multi-sensor panoramic camera will cover more ground from a single position. If the installation is purely indoor and low-profile, a dome camera avoids the visual bulk of a bullet housing. The DS-2CD5A26G0-IZS is available through Security Australia as part of the Hikvision enterprise camera range.

Before You Buy

Quick Fit Check

• Good match if: You need to cover a long outdoor approach - driveway, perimeter fence line, or loading dock entry - where the 100m IR range and motorised varifocal lens allow one camera to cover the full distance from an elevated fixed position.
• Good match if: The site has highly variable lighting - sun-facing entry gates, roller door openings, or car park exits - where the 140dB WDR and DarkFighter sensor are required to produce consistent usable images across the full day/night cycle.
• You may need a different model if: Your requirement is wide-area continuous monitoring of a large open space from a single point - a PTZ camera with optical zoom and auto-tracking, or a multi-sensor panoramic camera, will deliver broader situational coverage than a fixed bullet at any focal length.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: Your installation requires a fixed long-range outdoor bullet with a large sensor, motorised varifocal lens, 100m IR, and certified IK10 vandal resistance - particularly on industrial or commercial sites where the camera position is elevated and environmental conditions are harsh.
• You may need a different model if: Your site requires active pan, tilt, and optical zoom to follow moving subjects across a large area - a PTZ camera is the more appropriate product type for operator-controlled or auto-tracking wide-area coverage.
• Pairs well with: A PoE NVR with H.265+ compression support to take full advantage of the camera's bandwidth-efficient encoding and edge-based VCA event triggers for storage-efficient recording.

Common Questions

1. Does this camera work with a standard PoE switch?

   Yes. The DS-2CD5A26G0-IZS supports IEEE 802.3af PoE, which is standard PoE delivered by most managed and unmanaged PoE switches and PoE NVR ports. A single Cat5e or Cat6 cable carries both power and data up to 100 metres. No PoE+ (802.3at) switch is required, but confirm your switch provides the full 15.4W Class 3 budget at each port under full load.

2. Will this camera record footage without a NVR using its own storage?

   Yes. The camera supports onboard microSD storage up to 256GB, enabling edge recording without a NVR. This is useful as a backup recording channel or for standalone installations at remote monitoring points. Note that 256GB at 1080p/60fps will fill faster than at lower frame rates - adjust the recording frame rate or use motion-triggered recording to extend usable storage duration.

3. What does the motorised varifocal lens actually change about installation?

   It removes the need to physically adjust the lens after mounting. On a standard manual varifocal bullet, the installer must loosen, twist, and retighten the lens ring at the camera body - which is awkward on a 4-metre pole or high wall bracket and often requires a second visit to refine after initial commissioning. The motorised 2.8-12mm lens on this model is adjusted via the camera's web interface or management software, so zoom and focus are set from ground level once the camera is bolted in place.

4. Does this camera work in extreme Australian summer heat?

   Yes. The confirmed operating temperature range is -40°C to +60°C. At 60°C the camera continues operating within specification, which covers exposed rooftop and pole mounts in most Australian climates including northern Queensland and outback regions during peak summer. The IP67 rating also prevents dust ingress, which is relevant to dry inland and construction site environments.

5. What VCA features are built into the camera and do they require additional software?

   The onboard VCA includes face detection and object counting, and both run at the camera edge without requiring a separate analytics server or software licence. Events generated by these functions can trigger recording, push notifications through a compatible NVR or VMS, or activate alarm outputs. This is distinct from server-side analytics, which require a dedicated analytics platform. The camera's built-in VCA is suitable for targeted event-based monitoring rather than high-accuracy forensic analytics.

6. How much bandwidth does this camera use at 1080p/60fps?

   At full 1080p resolution and 60fps with H.265+ compression, bitrate will typically fall between 3-8 Mbps depending on scene complexity, motion level, and configured quality settings. H.265+ is significantly more efficient than H.264, so if your NVR and network support H.265+, use it - it roughly halves storage requirements versus H.264 at comparable quality. For bandwidth-constrained installations, the frame rate can be reduced from 60fps to 25fps without affecting image resolution. Stocked by Security Australia, this camera ships as a standalone unit without an NVR.

7. Is the IK10 rating relevant for an outdoor camera if it is mounted at height?

   Yes, in several realistic scenarios. Cameras mounted on poles at 3-4 metres are within reach of a person using a tool or ladder. IK10 confirms the housing withstands a 20-joule impact - the equivalent of a 5kg mass dropped from 400mm or a direct strike with a blunt object. For sites with a history of interference, high-traffic public areas, or industrial environments where equipment is handled roughly, IK10 is a genuine specification requirement rather than a precaution. At accessible mounting heights, it is the relevant rating to specify.

Downloads & Resources

No downloads available for this product.