Hikvision DS-2CD2387G2-LSU/SL 8MP 4K Gen2 Outdoor ColorVu Turret Camera with Acusense & Mic 30m + STROBE

Model: DS-2CD2387G2-LSU/SL

Who This Is For

When active deterrence is part of the brief, passive recording alone is not enough. The Hikvision DS-2CD2387G2-LSU/SL is built for installers and property owners who need a camera that does more than capture footage - it responds. The built-in strobe light and audio alarm trigger on AcuSense-classified detections, meaning the camera reacts to confirmed human or vehicle movement rather than blowing off at passing shadows or wildlife. Mounted under an eave or on a soffit at a home entry, driveway gate, side access path, or small business car park, the 8MP ColorVu sensor delivers full-colour 4K imagery through the night without needing IR to illuminate the scene. At 30 metres of colour-capable low-light range, this is well suited to residential perimeters, townhouse complexes, childcare entry points, and retail rear access where both identification quality and on-the-spot deterrence are priorities.

What This Camera Actually Does

Who Buys This Model

• Residential Installers: Specifying a single high-performing camera for a home driveway or side gate where the owner wants colour night footage and an on-camera deterrent without a separate alarm siren.
• Small Business Owners: Monitoring a rear car park, loading bay, or after-hours entry where both 4K identification detail and an active strobe response to trespassers are needed from one unit.
• Townhouse and Strata Managers: Covering shared pedestrian entry points or bin enclosures where AcuSense filtering reduces nuisance alerts to residents and the strobe discourages antisocial behaviour without escalating to an alarm response.
• Childcare and Education Facilities: Using the 8MP resolution for clear identification at building entries and the built-in microphone for ambient monitoring at access points during after-hours periods.

Honest Assessment

The DS-2CD2387G2-LSU/SL delivers a genuinely useful combination: 4K colour night imaging, on-device AI classification, and an active deterrent in a single turret housing. The ColorVu Gen2 sensor at F1.0 aperture produces colour footage in conditions where competing cameras without this specification would switch to greyscale IR. AcuSense classification is a measurable improvement over pixel-based motion detection for reducing unnecessary alerts. The 30-metre supplemental IR provides a fallback in absolute darkness where the sensor needs support, and the 256 GB microSD capacity gives meaningful standalone recording flexibility for remote positions. Where this camera will not serve well: it uses a fixed 2.8 mm lens, which is wide-angle and not suited to covering long distances such as a 50-metre driveway approach or a large car park requiring optical reach. It is also not a PTZ - coverage is fixed at installation. For wide-area or long-range applications, a different camera type is the right call. Available through Security Australia with full Hikvision warranty support.

Before You Buy

Quick Fit Check

• Good match if: You need full-colour night footage at a residential driveway, side access gate, or small business rear entry where the ColorVu Gen2 sensor's 0.0005 Lux minimum illumination means usable colour imagery without additional lighting infrastructure.
• Good match if: You want on-camera active deterrence - the strobe light and audio alarm trigger on AcuSense-confirmed human or vehicle detections, giving an immediate site response without a separate siren or monitoring centre callout.
• You may need a different model if: Your coverage zone is a long driveway, large car park, or industrial perimeter requiring optical reach beyond 30 metres or a narrow-angle lens - a bullet camera with a varifocal or motorised zoom lens would be a better fit for that application.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need 4K colour night performance combined with on-camera active deterrence (strobe and audio alarm) in a single compact turret housing that fits a standard eave or soffit mount.
• You may need a different model if: Your installation requires optical reach beyond 30 metres, a narrow field of view to cover a long approach, or varifocal adjustment to fine-tune coverage after install - a bullet camera with a motorised zoom lens would handle those requirements better.
• Pairs well with: A Hikvision AcuSense-compatible NVR with PoE ports, which allows the camera's human and vehicle classification events to display directly on the NVR interface without additional configuration and supports the two-way audio function through a connected monitor or app.

Common Questions

1. Does the strobe light trigger on every motion event, or only on specific detections?

   Only on AcuSense-confirmed human or vehicle detections. The camera's deep learning engine classifies each motion event before triggering the strobe and audio alarm. General motion from animals, wind-blown foliage, or passing headlights does not activate the deterrent, which is what keeps the system practical in outdoor residential environments where constant false triggers would make the strobe meaningless.

2. Will this camera record in colour at night without any external lighting?

   Yes. The ColorVu Gen2 sensor with F1.0 aperture lens reaches a minimum illumination of 0.0005 Lux in colour mode, which is sufficient for most outdoor environments with ambient streetlighting or even distant light scatter. In locations with zero ambient light, the supplemental IR illuminator activates and extends coverage to 30 metres, though IR footage is greyscale. For colour footage in complete darkness, an external white light source is needed.

3. Does this camera support two-way audio, and what hardware is needed?

   Yes. The DS-2CD2387G2-LSU/SL has a built-in microphone and supports two-way audio. To use the speak-back function, the camera needs to be connected to a compatible Hikvision NVR with audio output, or accessed via the Hik-Connect app or a web browser on a device with a microphone. No additional audio hardware is required at the camera end - the speaker function for talking back is handled by the NVR or client device, not by a speaker built into this camera housing.

4. What PoE standard does this camera require?

   IEEE 802.3af (standard PoE). It does not need PoE+ (802.3at), so it works with any standard PoE switch, PoE NVR port, or single-port PoE injector that meets the 802.3af specification. A single Cat5e or Cat6 cable carries both power and data to the camera, which simplifies the install and eliminates the need for a 12V DC power run to the mount point.

5. Can I use this camera without an NVR for standalone recording?

   Yes, for local edge recording. A microSD or SDXC card up to 256 GB installs directly into the camera and records footage independently of any NVR. This is practical for a single camera at a remote outbuilding, a secondary position at a property boundary, or as a redundant backup recording layer if the NVR connection is interrupted. For multi-camera recording with central management, a compatible NVR is still the recommended approach.

6. Does the 2.8 mm lens limit what I can cover?

   For most residential and small commercial positions, no. The 2.8 mm lens produces a wide field of view suited to covering entries, gates, car spaces, and building corners at typical mounting heights of 2.5 to 4 metres. The 8MP sensor means that even with a wide angle, there is enough resolution to crop into the image for recognition-level detail. Where the 2.8 mm lens does reach its limit is on long straight approaches - driveways over 15 metres, large car parks, or perimeter fences requiring reach beyond 30 metres. For those applications, stocked by Security Australia, a varifocal or longer fixed focal length camera in a bullet housing is a more appropriate specification.

7. How does the 130 dB WDR help in real installations?

   It handles scenes where the camera is looking at both a dark foreground and a bright background simultaneously. A common example is a doorway facing a sunlit street - without WDR, either the interior is correctly exposed and the outside is blown out white, or the outside is correctly exposed and the interior is black. At 130 dB, both zones are exposed in the same frame, which means subjects in the foreground remain visible even when there is strong backlight behind them.

Downloads & Resources

No downloads available for this product.