Hikvision DS‑220AZJ‑130‑BA Wall Mount Black – Wall Mount Bracket for Dome & Turret CCTV Cameras with Metal Construction and Black Finish

Model: DS-220AZJ-130-BA

Who This Is For

Property managers specifying camera positions on rendered brick, masonry, or timber-clad exteriors where a flush ceiling mount simply is not an option will find the DS-220AZJ-130-BA a straightforward solution. Designed for Hikvision dome and turret cameras, this wall mount bracket repositions the camera away from the mounting surface so the lens can angle downward toward the coverage zone rather than pointing into it. The all-metal construction handles outdoor temperature swings without warping, and the black powder-coat finish sits cleanly against dark fascia, timber cladding, or painted brickwork. Installers working on residential eave lines, apartment stairwells, or small commercial entries use this bracket when the camera model has no integrated wall-mount adapter and a dedicated arm is needed to achieve the right angle. It is a practical, single-purpose component that solves a geometry problem reliably.

What This Bracket Actually Does

Who Buys This Model

• Residential Installers: Fitting turret cameras under eaves or above garage doors where the wall surface does not allow the camera to angle downward without an offset arm.
• Commercial Property Managers: Specifying a tidy, finished-looking bracket on painted brick or rendered masonry at building entries, where a white or silver bracket would contrast poorly with a dark exterior.
• Security Technicians Completing Kits: Adding individual bracket units when a camera kit ships without a wall mount arm, or when a site survey identifies a wall-mount position that was not anticipated at the time of ordering.
• Strata and Apartment Managers: Mounting cameras at stairwell entry points and corridor ends where the only available surface is a vertical wall rather than a ceiling.

Honest Assessment

The DS-220AZJ-130-BA does one job and does it without compromise - it gives a dome or turret camera a stable, properly angled mounting position on a vertical wall surface. The all-metal body and black powder-coat finish make it more durable and visually suited to outdoor use than generic plastic alternatives. For Hikvision dome and turret cameras on dark exterior surfaces, it is a logical, low-effort addition to the installation. Where it will not help: it is not a universal bracket and is not intended for bullet cameras, PTZ units, or cameras from other manufacturers that use a different base pattern. It also will not solve a situation where a longer extension arm is needed - for example, mounting a camera on a deep soffit or positioning it away from a wall by more than the bracket's fixed depth. For those scenarios, a junction box extension or a longer pole-mount arm would be more appropriate. Check camera base compatibility before ordering, as not all Hikvision dome models share the same fixing pattern. Available through Security Australia as a standalone accessory.

Before You Buy

Quick Fit Check

• Good match if: You are mounting a compatible Hikvision dome or turret camera on a vertical wall surface and need an offset arm so the camera can angle downward over a driveway, entry, or walkway.
• Good match if: Your installation site has dark-coloured exterior cladding, fascia, or painted masonry where a black-finish bracket will blend cleanly rather than drawing attention.
• You may need a different model if: Your camera requires a significantly longer extension arm to clear a deep soffit or architectural overhang - a heavy-duty pole mount or extended junction box arm would be more suitable for those situations.

Key Features & Technical Specifications

Real-World Scenarios

How It Compares

• Choose this if: You need a purpose-built Hikvision wall mount arm in black to match dark exterior surfaces, and your camera is a compatible dome or turret model.
• You may need a different model if: Your installation requires a significantly longer standoff arm or a heavy-duty pole mount for cameras positioned on deep soffits, high parapet walls, or exposed poles - a longer extension bracket type would be more appropriate for those applications.
• Pairs well with: Hikvision dome or turret cameras installed at residential eaves, apartment entries, and small commercial building exteriors where a wall surface is the only available mounting point.

Common Questions

1. Will this bracket work with any Hikvision dome camera?

   Not necessarily all of them. The DS-220AZJ-130-BA is designed for Hikvision dome and turret cameras, but base plate dimensions and fixing hole patterns can vary between Hikvision product lines - particularly between full-size domes, mini domes, and specialty housing models. Always cross-reference your specific camera model's base dimensions against this bracket before ordering to confirm compatibility.

2. Does this bracket suit outdoor installations?

   Yes. The all-metal construction and powder-coat finish are suited to outdoor wall mounting. Metal brackets handle the UV exposure, temperature cycling, and moisture conditions that outdoor positions involve, without the brittleness or sagging that can occur with plastic alternatives over time.

3. Why do I need a wall mount bracket if my camera already has a base?

   Dome and turret cameras mounted directly against a flat vertical wall cannot angle downward far enough to cover the area below - the wall itself physically blocks the lens adjustment. The bracket creates a standoff from the wall surface so the camera can tilt to the required angle without obstruction. It is a geometry fix, not an optional accessory.

4. Is this bracket available in white or other colours?

   This specific model - the DS-220AZJ-130-BA - is finished in black only. If your installation surface is white or light-coloured, check the Security Australia range for the white-finish equivalent bracket to match your exterior.

5. Will this bracket fit bullet cameras or PTZ units?

   No. This bracket is designed specifically for dome and turret camera base plates. Bullet cameras use a different mounting collar and PTZ units require a heavier, purpose-built PTZ wall or pole mount. Using this bracket for either would not produce a secure or correctly aligned installation.

6. Does the bracket have cable management built in?

   The product name and specification data do not confirm a built-in cable management channel. For a clean installation where cables need to be concealed, plan to route cables behind the wall surface before mounting or use a surface conduit alongside the bracket arm.

Downloads & Resources

No downloads available for this product.